lkml.org 
[lkml]   [2015]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] doc: dt: beaglebone cape manager bindings.
Date
Bindings document for the beaglebone cape manager.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
---
.../devicetree/bindings/misc/bone_capemgr.txt | 123 +++++++++++++++++++++
1 file changed, 123 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/bone_capemgr.txt

diff --git a/Documentation/devicetree/bindings/misc/bone_capemgr.txt b/Documentation/devicetree/bindings/misc/bone_capemgr.txt
new file mode 100644
index 0000000..006f50c
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/bone_capemgr.txt
@@ -0,0 +1,123 @@
+* Beaglebone cape manager driver
+
+Required properties:
+- compatible: "ti,bone-capemgr"
+- eeprom: phandle to the EEPROM baseboard.
+ The EEPROM framework interface is use to obtain the data.
+
+Required children nodes:
+
+- baseboardmaps: Contains nodes, which each of the them defines a mapping from
+ the baseboard EEPROM board-name ID to a DT friendly compatible
+ string.
+
+ - board-name: The baseboard EEPROM board name, i.e. A335BONE for the original
+ beaglebone white.
+ - compatible-name: The DT friendly compatible string to be used for matching
+ compatible capes, i.e. "ti,beaglebone"
+
+
+ - slots: Defines the slots (I2C addresses) that capes are available.
+ - eeprom: phandle to the EEPROM cape.
+ The EEPROM framework interface is used to obtain the data.
+
+- Example of a beaglebone cape-manager:
+
+bone_capemgr {
+ compatible = "ti,bone-capemgr";
+ status = "okay";
+
+ eeprom = <&baseboard_eeprom>;
+
+ /* map board revisions to compatible definitions */
+ baseboardmaps {
+ baseboard_beaglebone: board@0 {
+ board-name = "A335BONE";
+ compatible-name = "ti,beaglebone";
+ };
+
+ baseboard_beaglebone_black: board@1 {
+ board-name = "A335BNLT";
+ compatible-name = "ti,beaglebone-black";
+ };
+ };
+
+ /* only 4 slots defined */
+ slots {
+ slot@0 {
+ eeprom = <&cape_eeprom0>;
+ };
+
+ slot@1 {
+ eeprom = <&cape_eeprom1>;
+ };
+
+ slot@2 {
+ eeprom = <&cape_eeprom2>;
+ };
+
+ slot@3 {
+ eeprom = <&cape_eeprom3>;
+ };
+ };
+};
+
+The format of the cape to be loaded is in a standard overlay format with
+the following root properties that are interpreted by the cape manager:
+
+Required properties:
+ - compatible: Should be compatible to the baseboard according to the
+ baseboard map value, i.e. "ti,beaglebone".
+ - part-numer: Should contain the part-number as stored in the EEPROM.
+ - version: Should contain a list of all the version that are supported
+ by the single cape dtbo, i.e. "00A1".
+
+Optional properties:
+ - exclusive-use: A string list which state the resources this cape requires.
+ No processing or matching to anything regarding the internal
+ kernel state is performed; it's purpose is to guard against
+ conflicts with other capes.
+ - priority: A priority to be assigned when loading a cape. A lower value
+ has higher priority. The purpose of the priority is to control
+ which cape is loaded first in case of a conflict.
+
+- Example of a serial cape:
+
+/dts-v1/;
+/plugin/;
+/ {
+ compatible = "ti,beaglebone", "ti,beaglebone-black";
+
+ /* identification */
+ part-number = "BB-BONE-SERL-03";
+ version = "00A1";
+
+ /* state the resources this cape uses */
+ exclusive-use =
+ /* the pin header uses */
+ "P9.21", /* uart2_txd */
+ "P9.22", /* uart2_rxd */
+ /* the hardware ip uses */
+ "uart2";
+
+ fragment@0 {
+ target = <&am33xx_pinmux>;
+ __overlay__ {
+ bb_uart2_pins: pinmux_bb_uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */
+ 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */
+ >;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&uart2>;
+ __overlay__ {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bb_uart2_pins>;
+ };
+ };
+};
--
1.7.12


\
 
 \ /
  Last update: 2015-05-13 10:21    [W:0.107 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site