lkml.org 
[lkml]   [2015]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH kernel v10 14/34] powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table
On 05/14/2015 10:23 AM, Gavin Shan wrote:
> On Tue, May 12, 2015 at 01:39:03AM +1000, Alexey Kardashevskiy wrote:
>> This adds a iommu_table_ops struct and puts pointer to it into
>> the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush
>> callbacks from ppc_md to the new struct where they really belong to.
>>
>> This adds the requirement for @it_ops to be initialized before calling
>> iommu_init_table() to make sure that we do not leave any IOMMU table
>> with iommu_table_ops uninitialized. This is not a parameter of
>> iommu_init_table() though as there will be cases when iommu_init_table()
>> will not be called on TCE tables, for example - VFIO.
>>
>> This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_"
>> redundand prefixes.
>>
>
> s/redundand/redundant I might be wrong because of my bad English.

No, you're right ;)

>
>> This removes tce_xxx_rm handlers from ppc_md but does not add
>> them to iommu_table_ops as this will be done later if we decide to
>> support TCE hypercalls in real mode. This removes _vm callbacks as
>> only virtual mode is supported by now so this also removes @rm parameter.
>>
>> For pSeries, this always uses tce_buildmulti_pSeriesLP/
>> tce_buildmulti_pSeriesLP. This changes multi callback to fall back to
>> tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not
>> present. The reason for this is we still have to support "multitce=off"
>> boot parameter in disable_multitce() and we do not want to walk through
>> all IOMMU tables in the system and replace "multi" callbacks with single
>> ones.
>>
>> For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2.
>> This makes the callbacks for them public. Later patches will extend
>> callbacks for IODA1/2.
>>
>> No change in behaviour is expected.
>>
>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
>
> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
>
>> ---
>> Changes:
>> v9:
>> * pnv_tce_build/pnv_tce_free/pnv_tce_get have been made public and lost
>> "rm" parameters to make following patches simpler (realmode is not
>> supported here anyway)
>> * got rid of _vm versions of callbacks
>> ---
>> arch/powerpc/include/asm/iommu.h | 17 +++++++++++
>> arch/powerpc/include/asm/machdep.h | 25 ---------------
>> arch/powerpc/kernel/iommu.c | 46 ++++++++++++++--------------
>> arch/powerpc/kernel/vio.c | 5 +++
>> arch/powerpc/platforms/cell/iommu.c | 8 +++--
>> arch/powerpc/platforms/pasemi/iommu.c | 7 +++--
>> arch/powerpc/platforms/powernv/pci-ioda.c | 14 +++++++++
>> arch/powerpc/platforms/powernv/pci-p5ioc2.c | 7 +++++
>> arch/powerpc/platforms/powernv/pci.c | 47 +++++------------------------
>> arch/powerpc/platforms/powernv/pci.h | 5 +++
>> arch/powerpc/platforms/pseries/iommu.c | 34 ++++++++++++---------
>> arch/powerpc/sysdev/dart_iommu.c | 12 +++++---
>> 12 files changed, 116 insertions(+), 111 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
>> index d91bd69..e2a45c3 100644
>> --- a/arch/powerpc/include/asm/iommu.h
>> +++ b/arch/powerpc/include/asm/iommu.h
>> @@ -44,6 +44,22 @@
>> extern int iommu_is_off;
>> extern int iommu_force_on;
>>
>> +struct iommu_table_ops {
>> + int (*set)(struct iommu_table *tbl,
>> + long index, long npages,
>> + unsigned long uaddr,
>> + enum dma_data_direction direction,
>> + struct dma_attrs *attrs);
>> + void (*clear)(struct iommu_table *tbl,
>> + long index, long npages);
>> + unsigned long (*get)(struct iommu_table *tbl, long index);
>> + void (*flush)(struct iommu_table *tbl);
>
> Currently, there isn't flush backend on PowerNV platform. I'm not sure
> if we have to implement it for PowerNV if we really need it. Maybe you
> will have it to support DDW in subsequent patches which I didn't look
> into it, but I will :-)


I am not adding new callbacks here, I am moving them. DART uses flush() so
it has to be here.


>
>> +};
>> +
>> +/* These are used by VIO */
>> +extern struct iommu_table_ops iommu_table_lpar_multi_ops;
>> +extern struct iommu_table_ops iommu_table_pseries_ops;
>> +
>
> It might be reasonable to add "struct iommu_table_ops *ops" to function
> vio_register_device_node() where the specified "ops" can be hooked to
> the newly created IOMMU table. In that way, the platform (pSeries) specific
> IOMMU table operations doesn't have to be exposed to PowerPC subsystem.

I am not exposing anything new here - I am just replacing references to
ppc_md with references to iommu_table_ops.

vio_register_device_node() is called from VIO code. So I'll have to have a
copy of iommu_table_pseries_ops and iommu_table_lpar_multi_ops in VIO code.
If I do this, I'll have to export
tce_build_pSeries()/tce_free_pSeries()/tce_get_pseries() to initialize
those structs. Either way I need to expose some symbols and do deeper
rework but not in this patchset.



--
Alexey


\
 
 \ /
  Last update: 2015-05-14 05:21    [W:0.379 / U:14.024 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site