lkml.org 
[lkml]   [2015]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH tip/core/rcu 13/24] rcu: Provide diagnostic option to slow down grace-period scans
Date
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them. This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability. A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies. Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
Documentation/kernel-parameters.txt | 16 ++++++-
kernel/rcu/tree.c | 29 ++++++++++--
lib/Kconfig.debug | 54 +++++++++++++++++++++-
.../selftests/rcutorture/configs/rcu/CFcommon | 2 +
4 files changed, 93 insertions(+), 8 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f6befa9855c1..d4afdbfbc5da 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2992,11 +2992,23 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Set maximum number of finished RCU callbacks to
process in one batch.

+ rcutree.gp_cleanup_delay= [KNL]
+ Set the number of jiffies to delay each step of
+ RCU grace-period cleanup. This only has effect
+ when CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is set.
+
rcutree.gp_init_delay= [KNL]
Set the number of jiffies to delay each step of
RCU grace-period initialization. This only has
- effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT is
- set.
+ effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT
+ is set.
+
+ rcutree.gp_preinit_delay= [KNL]
+ Set the number of jiffies to delay each step of
+ RCU grace-period pre-initialization, that is,
+ the propagation of recent CPU-hotplug changes up
+ the rcu_node combining tree. This only has effect
+ when CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is set.

rcutree.rcu_fanout_leaf= [KNL]
Increase the number of CPUs assigned to each
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 56eeb01d581e..69dd18af71da 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -158,6 +158,14 @@ static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
module_param(kthread_prio, int, 0644);

/* Delay in jiffies for grace-period initialization delays, debug only. */
+
+#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT
+static int gp_preinit_delay = CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT_DELAY;
+module_param(gp_preinit_delay, int, 0644);
+#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT */
+static const int gp_preinit_delay;
+#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT */
+
#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT
static int gp_init_delay = CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY;
module_param(gp_init_delay, int, 0644);
@@ -165,6 +173,13 @@ module_param(gp_init_delay, int, 0644);
static const int gp_init_delay;
#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */

+#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP
+static int gp_cleanup_delay = CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY;
+module_param(gp_cleanup_delay, int, 0644);
+#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP */
+static const int gp_cleanup_delay;
+#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP */
+
/*
* Number of grace periods between delays, normalized by the duration of
* the delay. The longer the the delay, the more the grace periods between
@@ -1737,6 +1752,13 @@ static void note_gp_changes(struct rcu_state *rsp, struct rcu_data *rdp)
rcu_gp_kthread_wake(rsp);
}

+static void rcu_gp_slow(struct rcu_state *rsp, int delay)
+{
+ if (delay > 0 &&
+ !(rsp->gpnum % (rcu_num_nodes * PER_RCU_NODE_PERIOD * delay)))
+ schedule_timeout_uninterruptible(delay);
+}
+
/*
* Initialize a new grace period. Return 0 if no grace period required.
*/
@@ -1779,6 +1801,7 @@ static int rcu_gp_init(struct rcu_state *rsp)
* will handle subsequent offline CPUs.
*/
rcu_for_each_leaf_node(rsp, rnp) {
+ rcu_gp_slow(rsp, gp_preinit_delay);
raw_spin_lock_irq(&rnp->lock);
smp_mb__after_unlock_lock();
if (rnp->qsmaskinit == rnp->qsmaskinitnext &&
@@ -1835,6 +1858,7 @@ static int rcu_gp_init(struct rcu_state *rsp)
* process finishes, because this kthread handles both.
*/
rcu_for_each_node_breadth_first(rsp, rnp) {
+ rcu_gp_slow(rsp, gp_init_delay);
raw_spin_lock_irq(&rnp->lock);
smp_mb__after_unlock_lock();
rdp = this_cpu_ptr(rsp->rda);
@@ -1852,10 +1876,6 @@ static int rcu_gp_init(struct rcu_state *rsp)
raw_spin_unlock_irq(&rnp->lock);
cond_resched_rcu_qs();
WRITE_ONCE(rsp->gp_activity, jiffies);
- if (gp_init_delay > 0 &&
- !(rsp->gpnum %
- (rcu_num_nodes * PER_RCU_NODE_PERIOD * gp_init_delay)))
- schedule_timeout_uninterruptible(gp_init_delay);
}

return 1;
@@ -1950,6 +1970,7 @@ static void rcu_gp_cleanup(struct rcu_state *rsp)
raw_spin_unlock_irq(&rnp->lock);
cond_resched_rcu_qs();
WRITE_ONCE(rsp->gp_activity, jiffies);
+ rcu_gp_slow(rsp, gp_cleanup_delay);
}
rnp = rcu_get_root(rsp);
raw_spin_lock_irq(&rnp->lock);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ba2b0c87e65b..e1af93ae246b 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1261,12 +1261,38 @@ config RCU_TORTURE_TEST_RUNNABLE
Say N here if you want the RCU torture tests to start only
after being manually enabled via /proc.

+config RCU_TORTURE_TEST_SLOW_PREINIT
+ bool "Slow down RCU grace-period pre-initialization to expose races"
+ depends on RCU_TORTURE_TEST
+ help
+ This option delays grace-period pre-initialization (the
+ propagation of CPU-hotplug changes up the rcu_node combining
+ tree) for a few jiffies between initializing each pair of
+ consecutive rcu_node structures. This helps to expose races
+ involving grace-period pre-initialization, in other words, it
+ makes your kernel less stable. It can also greatly increase
+ grace-period latency, especially on systems with large numbers
+ of CPUs. This is useful when torture-testing RCU, but in
+ almost no other circumstance.
+
+ Say Y here if you want your system to crash and hang more often.
+ Say N if you want a sane system.
+
+config RCU_TORTURE_TEST_SLOW_PREINIT_DELAY
+ int "How much to slow down RCU grace-period pre-initialization"
+ range 0 5
+ default 3
+ depends on RCU_TORTURE_TEST_SLOW_PREINIT
+ help
+ This option specifies the number of jiffies to wait between
+ each rcu_node structure pre-initialization step.
+
config RCU_TORTURE_TEST_SLOW_INIT
bool "Slow down RCU grace-period initialization to expose races"
depends on RCU_TORTURE_TEST
help
- This option makes grace-period initialization block for a
- few jiffies between initializing each pair of consecutive
+ This option delays grace-period initialization for a few
+ jiffies between initializing each pair of consecutive
rcu_node structures. This helps to expose races involving
grace-period initialization, in other words, it makes your
kernel less stable. It can also greatly increase grace-period
@@ -1286,6 +1312,30 @@ config RCU_TORTURE_TEST_SLOW_INIT_DELAY
This option specifies the number of jiffies to wait between
each rcu_node structure initialization.

+config RCU_TORTURE_TEST_SLOW_CLEANUP
+ bool "Slow down RCU grace-period cleanup to expose races"
+ depends on RCU_TORTURE_TEST
+ help
+ This option delays grace-period cleanup for a few jiffies
+ between cleaning up each pair of consecutive rcu_node
+ structures. This helps to expose races involving grace-period
+ cleanup, in other words, it makes your kernel less stable.
+ It can also greatly increase grace-period latency, especially
+ on systems with large numbers of CPUs. This is useful when
+ torture-testing RCU, but in almost no other circumstance.
+
+ Say Y here if you want your system to crash and hang more often.
+ Say N if you want a sane system.
+
+config RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY
+ int "How much to slow down RCU grace-period cleanup"
+ range 0 5
+ default 3
+ depends on RCU_TORTURE_TEST_SLOW_CLEANUP
+ help
+ This option specifies the number of jiffies to wait between
+ each rcu_node structure cleanup operation.
+
config RCU_CPU_STALL_TIMEOUT
int "RCU CPU stall timeout in seconds"
depends on RCU_STALL_COMMON
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
index 49701218dc62..f824b4c9d9d9 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
+++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
@@ -1,3 +1,5 @@
CONFIG_RCU_TORTURE_TEST=y
CONFIG_PRINTK_TIME=y
+CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP=y
CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y
+CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT=y
--
1.8.1.5


\
 
 \ /
  Last update: 2015-05-13 00:41    [W:1.705 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site