lkml.org 
[lkml]   [2015]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: Add binding for Broadcom MSPI driver.
Date

Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
---
.../devicetree/bindings/spi/brcm,mspi-spi.txt | 39 ++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt

diff --git a/Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt b/Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt
new file mode 100644
index 0000000..e86a7a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt
@@ -0,0 +1,39 @@
+Broadcom MSPI controller
+
+The Broadcom MSPI controller is a SPI controller found on various chips such
+as Cygnus.
+
+Required properties:
+- compatible: Must be "brcm,mspi-v0".
+
+- reg: The first register is the physical base address of the MSPI controller.
+ The second register is the address of the MSPI interrupt control registers. It
+ is only required for chips that have a separate register set for extended
+ interrupt control. This is required for Cygnus.
+
+- interrupts: Interrupt ID of the controller.
+
+Optional properties:
+- clocks: The MSPI reference clock. If not provided then it is assumed a clock
+ is enabled by default and no control of clock-frequency (see below) is
+ possible.
+
+- clock-names: The name of the reference clock.
+
+- clock-frequency: Desired frequency of the clock. This will set the serial
+ clock baud rate (SPBR) based on the reference clock frequency. The frequency
+ of the SPBR is mspi_clk / (2 * SPBR) where SPBR is a value between 1-255
+ determined by the desired 'clock-frequency'. If not provided then the default
+ baud rate of the controller is used.
+
+Example:
+
+mspi: mspi@18047200 {
+ compatible = "brcm,mspi-v0";
+ reg = <0x18047200 0x188>,
+ <0x180473a0 0x1c>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi41_clk>;
+ clock-names = "mspi_clk";
+ clock-frequency = <12500000>;
+};
--
1.7.9.5


\
 
 \ /
  Last update: 2015-05-12 20:01    [W:0.164 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site