lkml.org 
[lkml]   [2015]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.10 12/19] 3w-sas: fix command completion race
Date
3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit 579d69bc1fd56d5af5761969aa529d1d1c188300 upstream.

The 3w-sas driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Torsten Luettgert <ml-lkml@enda.eu>
Tested-by: Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/scsi/3w-sas.c | 50 ++++++++++----------------------------------------
drivers/scsi/3w-sas.h | 4 ----
2 files changed, 10 insertions(+), 44 deletions(-)

--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -303,26 +303,6 @@ static int twl_post_command_packet(TW_De
return 0;
} /* End twl_post_command_packet() */

-/* This function will perform a pci-dma mapping for a scatter gather list */
-static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id)
-{
- int use_sg;
- struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-
- use_sg = scsi_dma_map(cmd);
- if (!use_sg)
- return 0;
- else if (use_sg < 0) {
- TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list");
- return 0;
- }
-
- cmd->SCp.phase = TW_PHASE_SGLIST;
- cmd->SCp.have_data_in = use_sg;
-
- return use_sg;
-} /* End twl_map_scsi_sg_data() */
-
/* This function hands scsi cdb's to the firmware */
static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg)
{
@@ -370,8 +350,8 @@ static int twl_scsiop_execute_scsi(TW_De
if (!sglistarg) {
/* Map sglist from scsi layer to cmd packet */
if (scsi_sg_count(srb)) {
- sg_count = twl_map_scsi_sg_data(tw_dev, request_id);
- if (sg_count == 0)
+ sg_count = scsi_dma_map(srb);
+ if (sg_count <= 0)
goto out;

scsi_for_each_sg(srb, sg, sg_count, i) {
@@ -1116,15 +1096,6 @@ out:
return retval;
} /* End twl_initialize_device_extension() */

-/* This function will perform a pci-dma unmap */
-static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
-{
- struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-
- if (cmd->SCp.phase == TW_PHASE_SGLIST)
- scsi_dma_unmap(cmd);
-} /* End twl_unmap_scsi_data() */
-
/* This function will handle attention interrupts */
static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev)
{
@@ -1265,11 +1236,11 @@ static irqreturn_t twl_interrupt(int irq
}

/* Now complete the io */
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
tw_dev->posted_request_count--;
- tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
- twl_unmap_scsi_data(tw_dev, request_id);
}

/* Check for another response interrupt */
@@ -1414,10 +1385,12 @@ static int twl_reset_device_extension(TW
if ((tw_dev->state[i] != TW_S_FINISHED) &&
(tw_dev->state[i] != TW_S_INITIAL) &&
(tw_dev->state[i] != TW_S_COMPLETED)) {
- if (tw_dev->srb[i]) {
- tw_dev->srb[i]->result = (DID_RESET << 16);
- tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
- twl_unmap_scsi_data(tw_dev, i);
+ struct scsi_cmnd *cmd = tw_dev->srb[i];
+
+ if (cmd) {
+ cmd->result = (DID_RESET << 16);
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd);
}
}
}
@@ -1521,9 +1494,6 @@ static int twl_scsi_queue_lck(struct scs
/* Save the scsi command for use by the ISR */
tw_dev->srb[request_id] = SCpnt;

- /* Initialize phase to zero */
- SCpnt->SCp.phase = TW_PHASE_INITIAL;
-
retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
if (retval) {
tw_dev->state[request_id] = TW_S_COMPLETED;
--- a/drivers/scsi/3w-sas.h
+++ b/drivers/scsi/3w-sas.h
@@ -103,10 +103,6 @@ static char *twl_aen_severity_table[] =
#define TW_CURRENT_DRIVER_BUILD 0
#define TW_CURRENT_DRIVER_BRANCH 0

-/* Phase defines */
-#define TW_PHASE_INITIAL 0
-#define TW_PHASE_SGLIST 2
-
/* Misc defines */
#define TW_SECTOR_SIZE 512
#define TW_MAX_UNITS 32



\
 
 \ /
  Last update: 2015-05-11 21:01    [W:0.062 / U:3.948 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site