lkml.org 
[lkml]   [2015]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 06/21] h8300: Assembly headers
Date
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/include/asm/Kbuild | 74 ++++++++++++++
arch/h8300/include/asm/atomic.h | 159 ++++++++++++++++++++++++++++++
arch/h8300/include/asm/bitops.h | 185 +++++++++++++++++++++++++++++++++++
arch/h8300/include/asm/bitsperlong.h | 14 +++
arch/h8300/include/asm/bug.h | 12 +++
arch/h8300/include/asm/byteorder.h | 7 ++
arch/h8300/include/asm/cache.h | 11 +++
arch/h8300/include/asm/checksum.h | 102 +++++++++++++++++++
arch/h8300/include/asm/cmpxchg.h | 65 ++++++++++++
arch/h8300/include/asm/dma-mapping.h | 57 +++++++++++
arch/h8300/include/asm/elf.h | 101 +++++++++++++++++++
arch/h8300/include/asm/flat.h | 28 ++++++
arch/h8300/include/asm/io.h | 57 +++++++++++
arch/h8300/include/asm/irq.h | 26 +++++
arch/h8300/include/asm/irqflags.h | 96 ++++++++++++++++++
arch/h8300/include/asm/mc146818rtc.h | 9 ++
arch/h8300/include/asm/mutex.h | 9 ++
arch/h8300/include/asm/page.h | 18 ++++
arch/h8300/include/asm/page_offset.h | 2 +
arch/h8300/include/asm/pci.h | 19 ++++
arch/h8300/include/asm/pgtable.h | 49 ++++++++++
arch/h8300/include/asm/processor.h | 144 +++++++++++++++++++++++++++
arch/h8300/include/asm/ptrace.h | 36 +++++++
arch/h8300/include/asm/segment.h | 45 +++++++++
arch/h8300/include/asm/signal.h | 22 +++++
arch/h8300/include/asm/smp.h | 1 +
arch/h8300/include/asm/string.h | 17 ++++
arch/h8300/include/asm/switch_to.h | 51 ++++++++++
arch/h8300/include/asm/syscall.h | 56 +++++++++++
arch/h8300/include/asm/thread_info.h | 111 +++++++++++++++++++++
arch/h8300/include/asm/tlb.h | 8 ++
arch/h8300/include/asm/traps.h | 41 ++++++++
arch/h8300/include/asm/user.h | 74 ++++++++++++++
33 files changed, 1706 insertions(+)
create mode 100644 arch/h8300/include/asm/Kbuild
create mode 100644 arch/h8300/include/asm/atomic.h
create mode 100644 arch/h8300/include/asm/bitops.h
create mode 100644 arch/h8300/include/asm/bitsperlong.h
create mode 100644 arch/h8300/include/asm/bug.h
create mode 100644 arch/h8300/include/asm/byteorder.h
create mode 100644 arch/h8300/include/asm/cache.h
create mode 100644 arch/h8300/include/asm/checksum.h
create mode 100644 arch/h8300/include/asm/cmpxchg.h
create mode 100644 arch/h8300/include/asm/dma-mapping.h
create mode 100644 arch/h8300/include/asm/elf.h
create mode 100644 arch/h8300/include/asm/flat.h
create mode 100644 arch/h8300/include/asm/io.h
create mode 100644 arch/h8300/include/asm/irq.h
create mode 100644 arch/h8300/include/asm/irqflags.h
create mode 100644 arch/h8300/include/asm/mc146818rtc.h
create mode 100644 arch/h8300/include/asm/mutex.h
create mode 100644 arch/h8300/include/asm/page.h
create mode 100644 arch/h8300/include/asm/page_offset.h
create mode 100644 arch/h8300/include/asm/pci.h
create mode 100644 arch/h8300/include/asm/pgtable.h
create mode 100644 arch/h8300/include/asm/processor.h
create mode 100644 arch/h8300/include/asm/ptrace.h
create mode 100644 arch/h8300/include/asm/segment.h
create mode 100644 arch/h8300/include/asm/signal.h
create mode 100644 arch/h8300/include/asm/smp.h
create mode 100644 arch/h8300/include/asm/string.h
create mode 100644 arch/h8300/include/asm/switch_to.h
create mode 100644 arch/h8300/include/asm/syscall.h
create mode 100644 arch/h8300/include/asm/thread_info.h
create mode 100644 arch/h8300/include/asm/tlb.h
create mode 100644 arch/h8300/include/asm/traps.h
create mode 100644 arch/h8300/include/asm/user.h

diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
new file mode 100644
index 0000000..22b0580
--- /dev/null
+++ b/arch/h8300/include/asm/Kbuild
@@ -0,0 +1,74 @@
+generic-y += asm-offsets.h
+generic-y += auxvec.h
+generic-y += barrier.h
+generic-y += bugs.h
+generic-y += cacheflush.h
+generic-y += clkdev.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += dma.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += exec.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hash.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += irq_work.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += linkage.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += mcs_spinlock.h
+generic-y += mman.h
+generic-y += mmu.h
+generic-y += mmu_context.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += pgalloc.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += preempt.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += spinlock.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += timex.h
+generic-y += tlbflush.h
+generic-y += trace_clock.h
+generic-y += topology.h
+generic-y += types.h
+generic-y += uaccess.h
+generic-y += ucontext.h
+generic-y += unaligned.h
+generic-y += vga.h
+generic-y += xor.h
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
new file mode 100644
index 0000000..7ca73f8
--- /dev/null
+++ b/arch/h8300/include/asm/atomic.h
@@ -0,0 +1,159 @@
+#ifndef __ARCH_H8300_ATOMIC__
+#define __ARCH_H8300_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/cmpxchg.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ACCESS_ONCE((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = i)
+
+#include <linux/kernel.h>
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ ret = v->counter += i;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_add(i, v) atomic_add_return(i, v)
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ ret = v->counter -= i;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_sub(i, v) atomic_sub_return(i, v)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+static inline int atomic_inc_return(atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ v->counter++;
+ ret = v->counter;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_inc(v) atomic_inc_return(v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static inline int atomic_dec_return(atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ --v->counter;
+ ret = v->counter;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_dec(v) atomic_dec_return(v)
+
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ --v->counter;
+ ret = v->counter;
+ arch_local_irq_restore(flags);
+ return ret == 0;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int ret;
+ h8300flags flags;
+
+ flags = arch_local_irq_save();
+ ret = v->counter;
+ if (likely(ret == old))
+ v->counter = new;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int ret;
+ h8300flags flags;
+
+ flags = arch_local_irq_save();
+ ret = v->counter;
+ if (ret != u)
+ v->counter += a;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+ unsigned char ccr;
+ unsigned long tmp;
+
+ __asm__ __volatile__("stc ccr,%w3\n\t"
+ "orc #0x80,ccr\n\t"
+ "mov.l %0,%1\n\t"
+ "and.l %2,%1\n\t"
+ "mov.l %1,%0\n\t"
+ "ldc %w3,ccr"
+ : "=m"(*v), "=r"(tmp)
+ : "g"(~(mask)), "r"(ccr));
+}
+
+static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+ unsigned char ccr;
+ unsigned long tmp;
+
+ __asm__ __volatile__("stc ccr,%w3\n\t"
+ "orc #0x80,ccr\n\t"
+ "mov.l %0,%1\n\t"
+ "or.l %2,%1\n\t"
+ "mov.l %1,%0\n\t"
+ "ldc %w3,ccr"
+ : "=m"(*v), "=r"(tmp)
+ : "g"(~(mask)), "r"(ccr));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h
new file mode 100644
index 0000000..05999ab
--- /dev/null
+++ b/arch/h8300/include/asm/bitops.h
@@ -0,0 +1,185 @@
+#ifndef _H8300_BITOPS_H
+#define _H8300_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ * Copyright 2002, Yoshinori Sato
+ */
+
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+/*
+ * Function prototypes to keep gcc -Wall happy
+ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+ unsigned long result;
+
+ result = -1;
+ __asm__("1:\n\t"
+ "shlr.l %2\n\t"
+ "adds #1,%0\n\t"
+ "bcs 1b"
+ : "=r"(result)
+ : "0"(result), "r"(word));
+ return result;
+}
+
+#define H8300_GEN_BITOP(FNAME, OP) \
+static inline void FNAME(int nr, volatile unsigned long *addr) \
+{ \
+ unsigned char *b_addr; \
+ unsigned char bit = nr & 7; \
+ \
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
+ if (__builtin_constant_p(nr)) { \
+ __asm__(OP " %1,%0" : "+WU"(*b_addr) : "i"(nr & 7)); \
+ } else { \
+ __asm__(OP " %s1,%0" : "+WU"(*b_addr) : "r"(bit)); \
+ } \
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+H8300_GEN_BITOP(set_bit, "bset")
+H8300_GEN_BITOP(clear_bit, "bclr")
+H8300_GEN_BITOP(change_bit, "bnot")
+#define __set_bit(nr, addr) set_bit((nr), (addr))
+#define __clear_bit(nr, addr) clear_bit((nr), (addr))
+#define __change_bit(nr, addr) change_bit((nr), (addr))
+
+#undef H8300_GEN_BITOP
+
+static inline int test_bit(int nr, const unsigned long *addr)
+{
+ int ret = 0;
+ unsigned char *b_addr;
+ unsigned char bit = nr & 7;
+
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);
+ if (__builtin_constant_p(nr)) {
+ __asm__("bld %Z2,%1\n\t"
+ "rotxl %0\n\t"
+ : "=r"(ret)
+ : "WU"(*b_addr), "i"(nr & 7), "0"(ret) : "cc");
+ } else {
+ __asm__("btst %w2,%1\n\t"
+ "beq 1f\n\t"
+ "inc.l #1,%0\n"
+ "1:"
+ : "=r"(ret)
+ : "WU"(*b_addr), "r"(bit), "0"(ret) : "cc");
+ }
+ return ret;
+}
+
+#define __test_bit(nr, addr) test_bit(nr, addr)
+
+#define H8300_GEN_TEST_BITOP(FNNAME, OP) \
+static inline int FNNAME(int nr, void *addr) \
+{ \
+ int retval = 0; \
+ char ccrsave; \
+ unsigned char *b_addr; \
+ unsigned char bit = nr & 7; \
+ \
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
+ if (__builtin_constant_p(nr)) { \
+ __asm__("stc ccr,%s2\n\t" \
+ "orc #0x80,ccr\n\t" \
+ "bld %4,%1\n\t" \
+ OP " %4,%1\n\t" \
+ "rotxl.l %0\n\t" \
+ "ldc %s2,ccr" \
+ : "=r"(retval), "+WU" (*b_addr), "=&r"(ccrsave) \
+ : "0"(retval), "i"(nr & 7) : "cc"); \
+ } else { \
+ __asm__("stc ccr,%t3\n\t" \
+ "orc #0x80,ccr\n\t" \
+ "btst %s3,%1\n\t" \
+ OP " %s3,%1\n\t" \
+ "beq 1f\n\t" \
+ "inc.l #1,%0\n\t" \
+ "1:\n" \
+ "ldc %t3,ccr" \
+ : "=r"(retval), "+WU" (*b_addr) \
+ : "0" (retval), "r"(bit) : "cc"); \
+ } \
+ return retval; \
+} \
+ \
+static inline int __ ## FNNAME(int nr, void *addr) \
+{ \
+ int retval = 0; \
+ unsigned char *b_addr; \
+ unsigned char bit = nr & 7; \
+ \
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
+ if (__builtin_constant_p(nr)) { \
+ __asm__("bld %3,%1\n\t" \
+ OP " %3,%1\n\t" \
+ "rotxl.l %0\n\t" \
+ : "=r"(retval), "+WU"(*b_addr) \
+ : "0" (retval), "i"(nr & 7)); \
+ } else { \
+ __asm__("btst %s3,%1\n\t" \
+ OP " %s3,%1\n\t" \
+ "beq 1f\n\t" \
+ "inc.l #1,%0\n\t" \
+ "1:" \
+ : "=r"(retval), "+WU"(*b_addr) \
+ : "0" (retval), "r"(bit)); \
+ } \
+ return retval; \
+}
+
+H8300_GEN_TEST_BITOP(test_and_set_bit, "bset")
+H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
+H8300_GEN_TEST_BITOP(test_and_change_bit, "bnot")
+#undef H8300_GEN_TEST_BITOP
+
+#include <asm-generic/bitops/ffs.h>
+
+static inline unsigned long __ffs(unsigned long word)
+{
+ unsigned long result;
+
+ result = -1;
+ __asm__("1:\n\t"
+ "shlr.l %2\n\t"
+ "adds #1,%0\n\t"
+ "bcc 1b"
+ : "=r" (result)
+ : "0"(result), "r"(word));
+ return result;
+}
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _H8300_BITOPS_H */
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
new file mode 100644
index 0000000..e140e46
--- /dev/null
+++ b/arch/h8300/include/asm/bitsperlong.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_H8300_BITS_PER_LONG
+#define __ASM_H8300_BITS_PER_LONG
+
+#include <asm-generic/bitsperlong.h>
+
+#if !defined(__ASSEMBLY__)
+/* h8300-unknown-linux required long */
+#define __kernel_size_t __kernel_size_t
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+
+#endif /* __ASM_H8300_BITS_PER_LONG */
diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
new file mode 100644
index 0000000..1e1be81
--- /dev/null
+++ b/arch/h8300/include/asm/bug.h
@@ -0,0 +1,12 @@
+#ifndef _H8300_BUG_H
+#define _H8300_BUG_H
+
+/* always true */
+#define is_valid_bugaddr(addr) (1)
+
+#include <asm-generic/bug.h>
+
+struct pt_regs;
+extern void die(const char *str, struct pt_regs *fp, unsigned long err);
+
+#endif
diff --git a/arch/h8300/include/asm/byteorder.h b/arch/h8300/include/asm/byteorder.h
new file mode 100644
index 0000000..888478a
--- /dev/null
+++ b/arch/h8300/include/asm/byteorder.h
@@ -0,0 +1,7 @@
+#ifndef __H8300_BYTEORDER_H__
+#define __H8300_BYTEORDER_H__
+
+#define __BIG_ENDIAN __ORDER_BIG_ENDIAN__
+#include <linux/byteorder/big_endian.h>
+
+#endif
diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
new file mode 100644
index 0000000..0ef1edc
--- /dev/null
+++ b/arch/h8300/include/asm/cache.h
@@ -0,0 +1,11 @@
+#ifndef __ARCH_H8300_CACHE_H
+#define __ARCH_H8300_CACHE_H
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT 2
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h
new file mode 100644
index 0000000..59e2adc9
--- /dev/null
+++ b/arch/h8300/include/asm/checksum.h
@@ -0,0 +1,102 @@
+#ifndef _H8300_CHECKSUM_H
+#define _H8300_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__("add.w %e0,%f0\n\t"
+ "xor.w %e0,%e0\n\t"
+ "rotxl.w %e0\n\t"
+ "add.w %e0,%f0\n\t"
+ "sub.w %e0,%e0\n\t"
+ : "=r"(sum)
+ : "0"(sum));
+ return (__force __sum16)~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ int tmp;
+
+ __asm__ ("sub.l %1,%1\n\t"
+ "add.l %3,%0\n\t"
+ "addx #0,%w1\n\t"
+ "add.l %4,%0\n\t"
+ "addx #0,%w1\n\t"
+ "add.l %5,%0\n\t"
+ "addx #0,%w1\n\t"
+ "add.l %1,%0\n\t"
+ "bcc 1f\n\t"
+ "inc.l #1,%0\n"
+ "1:"
+ : "=&r" (sum), "=&r"(tmp)
+ : "0" (sum), "1" (daddr),
+ "r" (saddr), "r" (len + proto));
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif /* _H8300_CHECKSUM_H */
diff --git a/arch/h8300/include/asm/cmpxchg.h b/arch/h8300/include/asm/cmpxchg.h
new file mode 100644
index 0000000..95fec4c
--- /dev/null
+++ b/arch/h8300/include/asm/cmpxchg.h
@@ -0,0 +1,65 @@
+#ifndef __ARCH_H8300_CMPXCHG__
+#define __ARCH_H8300_CMPXCHG__
+
+#include <linux/irqflags.h>
+
+#define xchg(ptr, x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), \
+ sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x,
+ volatile void *ptr, int size)
+{
+ unsigned long tmp, flags;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("mov.b %2,%0\n\t"
+ "mov.b %1,%2"
+ : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("mov.w %2,%0\n\t"
+ "mov.w %1,%2"
+ : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("mov.l %2,%0\n\t"
+ "mov.l %1,%2"
+ : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
+ break;
+ default:
+ tmp = 0;
+ }
+ local_irq_restore(flags);
+ return tmp;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#endif /* __ARCH_H8300_CMPXCHG__ */
diff --git a/arch/h8300/include/asm/dma-mapping.h b/arch/h8300/include/asm/dma-mapping.h
new file mode 100644
index 0000000..6e67a909
--- /dev/null
+++ b/arch/h8300/include/asm/dma-mapping.h
@@ -0,0 +1,57 @@
+#ifndef _H8300_DMA_MAPPING_H
+#define _H8300_DMA_MAPPING_H
+
+#include <asm-generic/dma-coherent.h>
+
+extern struct dma_map_ops h8300_dma_map_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+ return &h8300_dma_map_ops;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+ return 0;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+ return 0;
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+#define dma_alloc_coherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL)
+
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag,
+ struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ void *memory;
+
+ memory = ops->alloc(dev, size, dma_handle, flag, attrs);
+ return memory;
+}
+
+#define dma_free_coherent(d, s, c, h) dma_free_attrs(d, s, c, h, NULL)
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle,
+ struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ ops->free(dev, size, cpu_addr, dma_handle, attrs);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+#endif
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
new file mode 100644
index 0000000..09031d0
--- /dev/null
+++ b/arch/h8300/include/asm/elf.h
@@ -0,0 +1,101 @@
+#ifndef __ASM_H8300_ELF_H
+#define __ASM_H8300_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_H8_300
+#if defined(CONFIG_CPU_H8300H)
+#define ELF_CORE_EFLAGS 0x810000
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define ELF_CORE_EFLAGS 0x820000
+#endif
+
+#define ELF_PLAT_INIT(_r) do { (_r)->er1 = 0; } while (0)
+
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define R_H8_NONE 0
+#define R_H8_DIR32 1
+#define R_H8_DIR32_28 2
+#define R_H8_DIR32_24 3
+#define R_H8_DIR32_16 4
+#define R_H8_DIR32U 6
+#define R_H8_DIR32U_28 7
+#define R_H8_DIR32U_24 8
+#define R_H8_DIR32U_20 9
+#define R_H8_DIR32U_16 10
+#define R_H8_DIR24 11
+#define R_H8_DIR24_20 12
+#define R_H8_DIR24_16 13
+#define R_H8_DIR24U 14
+#define R_H8_DIR24U_20 15
+#define R_H8_DIR24U_16 16
+#define R_H8_DIR16 17
+#define R_H8_DIR16U 18
+#define R_H8_DIR16S_32 19
+#define R_H8_DIR16S_28 20
+#define R_H8_DIR16S_24 21
+#define R_H8_DIR16S_20 22
+#define R_H8_DIR16S 23
+#define R_H8_DIR8 24
+#define R_H8_DIR8U 25
+#define R_H8_DIR8Z_32 26
+#define R_H8_DIR8Z_28 27
+#define R_H8_DIR8Z_24 28
+#define R_H8_DIR8Z_20 29
+#define R_H8_DIR8Z_16 30
+#define R_H8_PCREL16 31
+#define R_H8_PCREL8 32
+#define R_H8_BPOS 33
+#define R_H8_PCREL32 34
+#define R_H8_GOT32O 35
+#define R_H8_GOT16O 36
+#define R_H8_DIR16A8 59
+#define R_H8_DIR16R8 60
+#define R_H8_DIR24A8 61
+#define R_H8_DIR24R8 62
+#define R_H8_DIR32A16 63
+#define R_H8_ABS32 65
+#define R_H8_ABS32A16 127
+
+#endif
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
new file mode 100644
index 0000000..a4898ec
--- /dev/null
+++ b/arch/h8300/include/asm/flat.h
@@ -0,0 +1,28 @@
+/*
+ * arch/h8300/asm/include/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __H8300_FLAT_H__
+#define __H8300_FLAT_H__
+
+#define flat_argvp_envp_on_stack() 1
+#define flat_old_ram_flag(flags) 1
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_set_persistent(relval, p) 0
+
+/*
+ * on the H8 a couple of the relocations have an instruction in the
+ * top byte. As there can only be 24bits of address space, we just
+ * always preserve that 8bits at the top, when it isn't an instruction
+ * is is 0 (davidm@snapgear.com)
+ */
+
+#define flat_get_relocate_addr(rel) (rel & ~0x00000001)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
+ ({(void)persistent; \
+ get_unaligned(rp) & (((flags) & FLAT_FLAG_GOTPIC) ? \
+ 0xffffffff : 0x00ffffff); })
+#define flat_put_addr_at_rp(rp, addr, rel) \
+ put_unaligned(((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), (rp))
+
+#endif /* __H8300_FLAT_H__ */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
new file mode 100644
index 0000000..1d09b2f
--- /dev/null
+++ b/arch/h8300/include/asm/io.h
@@ -0,0 +1,57 @@
+#ifndef _H8300_IO_H
+#define _H8300_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm-generic/io.h>
+
+/* H8/300 internal I/O functions */
+static inline unsigned char ctrl_inb(unsigned long addr)
+{
+ return *(volatile unsigned char *)addr;
+}
+
+static inline unsigned short ctrl_inw(unsigned long addr)
+{
+ return *(volatile unsigned short *)addr;
+}
+
+static inline unsigned long ctrl_inl(unsigned long addr)
+{
+ return *(volatile unsigned long *)addr;
+}
+
+static inline void ctrl_outb(unsigned char b, unsigned long addr)
+{
+ *(volatile unsigned char *)addr = b;
+}
+
+static inline void ctrl_outw(unsigned short b, unsigned long addr)
+{
+ *(volatile unsigned short *)addr = b;
+}
+
+static inline void ctrl_outl(unsigned long b, unsigned long addr)
+{
+ *(volatile unsigned long *)addr = b;
+}
+
+static inline void ctrl_bclr(int b, unsigned long addr)
+{
+ if (__builtin_constant_p(b))
+ __asm__("bclr %1,%0" : : "WU"(addr), "i"(b));
+ else
+ __asm__("bclr %w1,%0" : : "WU"(addr), "r"(b));
+}
+
+static inline void ctrl_bset(int b, unsigned long addr)
+{
+ if (__builtin_constant_p(b))
+ __asm__("bset %1,%0" : : "WU"(addr), "i"(b));
+ else
+ __asm__("bset %w1,%0" : : "WU"(addr), "r"(b));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_IO_H */
diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h
new file mode 100644
index 0000000..69f23f0
--- /dev/null
+++ b/arch/h8300/include/asm/irq.h
@@ -0,0 +1,26 @@
+#ifndef _H8300_IRQ_H_
+#define _H8300_IRQ_H_
+
+#include <linux/irqchip.h>
+
+#if defined(CONFIG_CPU_H8300H)
+#define NR_IRQS 64
+#define IRQ_CHIP h8300h_irq_chip
+#define EXT_IRQ0 12
+#define EXT_IRQS 6
+#elif defined(CONFIG_CPU_H8S)
+#define NR_IRQS 128
+#define IRQ_CHIP h8s_irq_chip
+#define EXT_IRQ0 16
+#define EXT_IRQS 16
+#endif
+
+static inline int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+void h8300_init_ipr(void);
+extern struct irq_chip h8300h_irq_chip;
+extern struct irq_chip h8s_irq_chip;
+#endif /* _H8300_IRQ_H_ */
diff --git a/arch/h8300/include/asm/irqflags.h b/arch/h8300/include/asm/irqflags.h
new file mode 100644
index 0000000..5e1e324
--- /dev/null
+++ b/arch/h8300/include/asm/irqflags.h
@@ -0,0 +1,96 @@
+#ifndef _H8300_IRQFLAGS_H
+#define _H8300_IRQFLAGS_H
+
+#ifdef CONFIG_CPU_H8300H
+typedef unsigned char h8300flags;
+
+static inline h8300flags arch_local_save_flags(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0" : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ __asm__ volatile ("orc #0xc0,ccr");
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ __asm__ volatile ("andc #0x3f,ccr");
+}
+
+static inline h8300flags arch_local_irq_save(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0\n\t"
+ "orc #0xc0,ccr" : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_restore(h8300flags flags)
+{
+ __asm__ volatile ("ldc %w0,ccr" : : "r" (flags) : "cc");
+}
+
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags & 0xc0) == 0xc0;
+}
+#endif
+#ifdef CONFIG_CPU_H8S
+typedef unsigned short h8300flags;
+
+static inline h8300flags arch_local_save_flags(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0\n\tstc exr,%x0" : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ __asm__ volatile ("orc #0x80,ccr\n\t");
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ __asm__ volatile ("andc #0x7f,ccr\n\t"
+ "andc #0xf0,exr\n\t");
+}
+
+static inline h8300flags arch_local_irq_save(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0\n\t"
+ "stc exr,%x0\n\t"
+ "orc #0x80,ccr\n\t"
+ : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_restore(h8300flags flags)
+{
+ __asm__ volatile ("ldc %w0,ccr\n\t"
+ "ldc %x0,exr"
+ : : "r" (flags) : "cc");
+}
+
+static inline int arch_irqs_disabled_flags(h8300flags flags)
+{
+ return (flags & 0x0080) == 0x0080;
+}
+
+#endif
+
+static inline int arch_irqs_disabled(void)
+{
+ return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+#endif /* _H8300_IRQFLAGS_H */
diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..ab9d964
--- /dev/null
+++ b/arch/h8300/include/asm/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _H8300_MC146818RTC_H
+#define _H8300_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _H8300_MC146818RTC_H */
diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/h8300/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
new file mode 100644
index 0000000..3a987a5
--- /dev/null
+++ b/arch/h8300/include/asm/page.h
@@ -0,0 +1,18 @@
+#ifndef _H8300_PAGE_H
+#define _H8300_PAGE_H
+
+#include <asm-generic/page.h>
+#include <linux/types.h>
+
+#define MAP_NR(addr) (((uintptr_t)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifndef __ASSEMBLY__
+extern unsigned long rom_length;
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern unsigned long _ramend;
+#endif
+
+#endif
diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h
new file mode 100644
index 0000000..888576d
--- /dev/null
+++ b/arch/h8300/include/asm/page_offset.h
@@ -0,0 +1,2 @@
+
+#define PAGE_OFFSET_RAW 0x00000000
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
new file mode 100644
index 0000000..0b2acaa
--- /dev/null
+++ b/arch/h8300/include/asm/pci.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_H8300_PCI_H
+#define _ASM_H8300_PCI_H
+
+/*
+ * asm-h8300/pci.h - H8/300 specific PCI declarations.
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#define pcibios_assign_all_busses() 0
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+#endif /* _ASM_H8300_PCI_H */
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
new file mode 100644
index 0000000..8341db6
--- /dev/null
+++ b/arch/h8300/include/asm/pgtable.h
@@ -0,0 +1,49 @@
+#ifndef _H8300_PGTABLE_H
+#define _H8300_PGTABLE_H
+#include <asm-generic/pgtable-nopud.h>
+#include <asm-generic/pgtable.h>
+#define pgtable_cache_init() do { } while (0)
+extern void paging_init(void);
+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+#define kern_addr_valid(addr) (1)
+#define pgprot_writecombine(prot) (prot)
+#define pgprot_noncached pgprot_writecombine
+
+static inline int pte_file(pte_t pte) { return 0; }
+#define swapper_pg_dir ((pgd_t *) 0)
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
new file mode 100644
index 0000000..54e3fd8
--- /dev/null
+++ b/arch/h8300/include/asm/processor.h
@@ -0,0 +1,144 @@
+/*
+ * include/asm-h8300/processor.h
+ *
+ * Copyright (C) 2002 Yoshinori Sato
+ *
+ * Based on: linux/asm-m68nommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_H8300_PROCESSOR_H
+#define __ASM_H8300_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#include <linux/compiler.h>
+#include <asm/segment.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+ extern unsigned int _sw_usp;
+
+ return _sw_usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+ extern unsigned int _sw_usp;
+
+ _sw_usp = usp;
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE (0xFFFFFFFFUL)
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE 0
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned long ccr; /* saved status register */
+ unsigned long esp0; /* points to SR of stack frame */
+ struct {
+ unsigned short *addr;
+ unsigned short inst;
+ } breakinfo;
+};
+
+#define INIT_THREAD { \
+ .ksp = sizeof(init_stack) + (unsigned long)init_stack, \
+ .usp = 0, \
+ .ccr = PS_S, \
+ .esp0 = 0, \
+ .breakinfo = { \
+ .addr = (unsigned short *)-1, \
+ .inst = 0 \
+ } \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#if defined(CONFIG_CPU_H8300H)
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ (_regs)->pc = (_pc); \
+ (_regs)->ccr = 0x00; /* clear all flags */ \
+ (_regs)->er5 = current->mm->start_data; /* GOT base */ \
+ (_regs)->sp = ((unsigned long)(_usp)) - sizeof(unsigned long) * 3; \
+} while (0)
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ (_regs)->pc = (_pc); \
+ (_regs)->ccr = 0x00; /* clear kernel flag */ \
+ (_regs)->exr = 0x78; /* enable all interrupts */ \
+ (_regs)->er5 = current->mm->start_data; /* GOT base */ \
+ /* 14 = space for retaddr(4), vector(4), er0(4) and exr(2) on stack */ \
+ (_regs)->sp = ((unsigned long)(_usp)) - 14; \
+} while (0)
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ MAP_NR((tsk)->thread.esp0) < max_mapnr) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+#define cpu_relax_lowlatency() cpu_relax()
+
+#define HARD_RESET_NOW() ({ \
+ local_irq_disable(); \
+ asm("jmp @@0"); \
+})
+
+#endif
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
new file mode 100644
index 0000000..e693fb4
--- /dev/null
+++ b/arch/h8300/include/asm/ptrace.h
@@ -0,0 +1,36 @@
+#ifndef _H8300_PTRACE_H
+#define _H8300_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+#ifndef PS_S
+#define PS_S (0x10)
+#endif
+
+#if defined(CONFIG_CPU_H8300H)
+#define H8300_REGS_NO 11
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define H8300_REGS_NO 12
+#endif
+
+#define arch_has_single_step() (1)
+
+#define user_mode(regs) (!((regs)->ccr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+#define user_stack_pointer(regs) ((regs)->sp)
+#define current_pt_regs() ((struct pt_regs *) \
+ (THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
+#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
+#define current_user_stack_pointer() rdusp()
+#define task_pt_regs(task) \
+ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
+
+extern long h8300_get_reg(struct task_struct *task, int regno);
+extern int h8300_put_reg(struct task_struct *task, int regno,
+ unsigned long data);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _H8300_PTRACE_H */
diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
new file mode 100644
index 0000000..48424c6
--- /dev/null
+++ b/arch/h8300/include/asm/segment.h
@@ -0,0 +1,45 @@
+#ifndef _H8300_SEGMENT_H
+#define _H8300_SEGMENT_H
+
+/* define constants */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (3)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (4)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _H8300_SEGMENT_H */
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
new file mode 100644
index 0000000..5870835
--- /dev/null
+++ b/arch/h8300/include/asm/signal.h
@@ -0,0 +1,22 @@
+#ifndef _H8300_SIGNAL_H
+#define _H8300_SIGNAL_H
+
+#include <uapi/asm/signal.h>
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define __ARCH_HAS_SA_RESTORER
+#include <asm/sigcontext.h>
+
+#endif /* _H8300_SIGNAL_H */
diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h
new file mode 100644
index 0000000..9e9bd7e
--- /dev/null
+++ b/arch/h8300/include/asm/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h
new file mode 100644
index 0000000..5dc5a8a
--- /dev/null
+++ b/arch/h8300/include/asm/string.h
@@ -0,0 +1,17 @@
+#ifndef _H8300_STRING_H_
+#define _H8300_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *d, const void *s, size_t count);
+
+#endif /* KERNEL */
+
+#endif
diff --git a/arch/h8300/include/asm/switch_to.h b/arch/h8300/include/asm/switch_to.h
new file mode 100644
index 0000000..7ad1bf9
--- /dev/null
+++ b/arch/h8300/include/asm/switch_to.h
@@ -0,0 +1,51 @@
+#ifndef _H8300_SWITCH_TO_H
+#define _H8300_SWITCH_TO_H
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ *
+ * H8/300 Porting 2002/09/04 Yoshinori Sato
+ */
+
+asmlinkage void resume(void);
+#define switch_to(prev, next, last) \
+do { \
+ void *_last; \
+ __asm__ __volatile__( \
+ "mov.l %1, er0\n\t" \
+ "mov.l %2, er1\n\t" \
+ "mov.l %3, er2\n\t" \
+ "jsr @_resume\n\t" \
+ "mov.l er2,%0\n\t" \
+ : "=r" (_last) \
+ : "r" (&(prev->thread)), \
+ "r" (&(next->thread)), \
+ "g" (prev) \
+ : "cc", "er0", "er1", "er2", "er3"); \
+ (last) = _last; \
+} while (0)
+
+#endif /* _H8300_SWITCH_TO_H */
diff --git a/arch/h8300/include/asm/syscall.h b/arch/h8300/include/asm/syscall.h
new file mode 100644
index 0000000..b41f688
--- /dev/null
+++ b/arch/h8300/include/asm/syscall.h
@@ -0,0 +1,56 @@
+#ifndef __ASM_H8300_SYSCALLS_32_H
+#define __ASM_H8300_SYSCALLS_32_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+static inline int
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_er0;
+}
+
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+ unsigned int i, unsigned int n, unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+
+ while (n > 0) {
+ switch (i) {
+ case 0:
+ *args++ = regs->er1;
+ break;
+ case 1:
+ *args++ = regs->er2;
+ break;
+ case 2:
+ *args++ = regs->er3;
+ break;
+ case 3:
+ *args++ = regs->er4;
+ break;
+ case 4:
+ *args++ = regs->er5;
+ break;
+ case 5:
+ *args++ = regs->er6;
+ break;
+ }
+ i++;
+ n--;
+ }
+}
+
+
+
+/* Misc syscall related bits */
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_H8300_SYSCALLS_32_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
new file mode 100644
index 0000000..544c307
--- /dev/null
+++ b/arch/h8300/include/asm/thread_info.h
@@ -0,0 +1,111 @@
+/* thread_info.h: h8300 low-level thread information
+ * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+#include <asm/segment.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ mm_segment_t addr_limit;
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE 8192 /* 2 pages */
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+
+ __asm__("mov.l sp, %0\n\t"
+ "and.w %1, %T0"
+ : "=&r"(ti)
+ : "i" (~(THREAD_SIZE-1) & 0xffff));
+ return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_SINGLESTEP 3 /* singlestepping active */
+#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
+#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
+#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
+#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+ _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
+ _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
+ _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
+ _TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+ _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h
new file mode 100644
index 0000000..2c6fa4ee
--- /dev/null
+++ b/arch/h8300/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef __H8300_TLB_H__
+#define __H8300_TLB_H__
+
+#define tlb_flush(tlb) do { } while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
new file mode 100644
index 0000000..aa34e75
--- /dev/null
+++ b/arch/h8300/include/asm/traps.h
@@ -0,0 +1,41 @@
+/*
+ * linux/include/asm-h8300/traps.h
+ *
+ * Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _H8300_TRAPS_H
+#define _H8300_TRAPS_H
+
+extern void _system_call(void);
+extern void _interrupt_entry(void);
+extern void _trace_break(void);
+extern void _nmi(void);
+extern void _interrupt_entry(void);
+
+extern unsigned long *_interrupt_redirect_table;
+
+#define JMP_OP 0x5a000000
+#define JSR_OP 0x5e000000
+#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
+#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
+#define CPU_VECTOR ((unsigned long *)0x000000)
+#define ADDR_MASK (0xffffff)
+
+#define TRACE_VEC 5
+
+#define TRAP0_VEC 8
+#define TRAP1_VEC 9
+#define TRAP2_VEC 10
+#define TRAP3_VEC 11
+
+extern char _start, _etext;
+#define check_kernel_text(addr) \
+ ((addr >= (unsigned long)(&_start)) && \
+ (addr < (unsigned long)(&_etext)))
+
+#endif /* _H8300_TRAPS_H */
diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h
new file mode 100644
index 0000000..2e3555f
--- /dev/null
+++ b/arch/h8300/include/asm/user.h
@@ -0,0 +1,74 @@
+#ifndef _H8300_USER_H
+#define _H8300_USER_H
+
+#include <asm/page.h>
+
+/* Core file format: The core file is written in such a way that gdb
+ can understand it and provide useful information to the user (under
+ linux we use the 'trad-core' bfd). There are quite a number of
+ obstacles to being able to view the contents of the floating point
+ registers, and until these are solved you will not be able to view the
+ contents of them. Actually, you can read in the core file and look at
+ the contents of the user struct to find out what the floating point
+ registers contain.
+ The actual file contents are as follows:
+ UPAGE: 1 page consisting of a user struct that tells gdb what is present
+ in the file. Directly after this is a copy of the task_struct, which
+ is currently not used by gdb, but it may come in useful at some point.
+ All of the registers are stored as part of the upage. The upage should
+ always be only one page.
+ DATA: The data area is stored. We use current->end_text to
+ current->brk to pick up all of the user variables, plus any memory
+ that may have been malloced. No attempt is made to determine if a page
+ is demand-zero or if a page is totally unused, we just cover the entire
+ range. All of the addresses are rounded in such a way that an integral
+ number of pages is written.
+ STACK: We need the stack information in order to get a meaningful
+ backtrace. We need to write the data from (esp) to
+ current->start_stack, so we round each of these off in order to be able
+ to write an integer number of pages.
+ The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+ is still the layout used by user (the new pt_regs doesn't have
+ all registers). */
+struct user_regs_struct {
+ long er1, er2, er3, er4, er5, er6;
+ long er0;
+ long usp;
+ long orig_er0;
+ long ccr;
+ long pc;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ this will be used by gdb to figure out where the data and stack segments
+ are within the file, and what virtual addresses to use. */
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+ from the ptrace(3,...) function. */
+ struct user_regs_struct regs; /* Where the registers are actually stored */
+/* ptrace does not yet supply these. Someday.... */
+/* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ unsigned long u_ar0; /* Used by gdb to help find the values for */
+ /* the registers. */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
--
2.1.4


\
 
 \ /
  Last update: 2015-05-11 08:41    [W:0.161 / U:33.856 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site