lkml.org 
[lkml]   [2015]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 11/12] ARM: berlin: add BG2Q node for the nand
Date
Add a node describing the nand controller of the Marvell Berlin BG2Q
SoC. It uses the pxa3xx nand driver, with a dedicated compatible.

Also add the corresponding pinmuxing configuration.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index be5397288d24..aeb3a0ea0540 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -437,6 +437,19 @@
status = "disabled";
};

+ nand0: nand@f00000 {
+ compatible = "marvell,berlin2-nand";
+ reg = <0xf00000 0x10000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_NFC>,
+ <&chip CLKID_NFC_ECC>;
+ clock-names = "nfc", "ecc";
+
+ #address-cells = <1>;
+
+ status = "disabled";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
2.4.0


\
 
 \ /
  Last update: 2015-05-11 17:41    [W:0.106 / U:49.336 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site