Messages in this thread | | | Date | Mon, 11 May 2015 14:58:08 +0200 | From | Gregory CLEMENT <> | Subject | Re: [PATCH v2 0/5] Add proper support for Compulab CM-A510/SBC-A510 |
| |
Hi Sebastian,
On 06/05/2015 15:13, Arnd Bergmann wrote: > On Wednesday 06 May 2015 15:06:29 Gregory CLEMENT wrote: >> >> On 04/05/2015 22:08, Sebastian Hesselbarth wrote: >>> This is v2 of the patch set to improve current mainline support for >>> the Compulab CM-A510 System-on-Module (SoM) and its default Compulab >>> SBC-A510 base board. >>> >>> Compared to v1 [1] there have been the overall changes: >>> - Drop i2c-mux-pinctrl rework as Wolfram Sang raised concerns with >>> respect to OF_DYNAMIC. Instead we add i2c-mux-pinctrl node by >>> default and wait until corresponding driver respects disabled >>> sub-bus nodes. This will add 3 additional i2c busses to all >>> Dove based boards, but no functional change with respect to >>> i2c-0. >>> - Split patches dealing with arch/arm/boot/dts/Makefile to route >>> them though arm-soc directly. >>> >>> Other patches of v1 have already been taken by MVEBU SoC maintainers >>> as fixes. >>> >>> Patches are based on v4.1-rc1 and are intended for v4.2. All patches >>> contain appropriate Acked-by's from related maintainers. Patches 3 >>> and 5 should go thought arm-soc directly, the rest can go though >>> mvebu tree. >> >> Usually even the change of the arch/arm/boot/dts/Makefile go to >> arm-soc through mvebu. For patch 5 it makes sens because if the series >> is spited then the Makefile could be merged before the new file >> to build. >> >> So unless, Arnd or Olof really want to pick the patches 3 and 5 I will >> apply the patches 2 to 5 on mvebu/dt. >> >> Arnd, Olof, do you agree? > > Yes, please pick up all the patches and send them to us with your > normal pull requests.
patches 2 to 5 applied on mvebu/dt
Thanks,
Gregory
> > Arnd >
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
| |