lkml.org 
[lkml]   [2015]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] Input: atmel_mxt_ts - add support for Google Pixel 2
Hi Nick,

On Thu, Apr 09, 2015 at 12:08:44PM +0100, Nick Dyer wrote:
> On 08/04/15 01:26, Dmitry Torokhov wrote:
> > This change allows atmel_mxt_ts to bind to ACPI-enumerated devices in
> > Google Pixel 2 (2015).
>
> Can you point me to any instructions for testing this on the Pixel 2 we
> have here?

I just installed Fedora 21, updated fully, and rebuild 4.0+ kernel with
their default config file.

To install Fedora switch the unit into developer mode, then, in Chrome
OS do "sudo crossystem dev_boot_legacy=1"), reboot, and after hitting
"Ctrl-L" early in teh boot sequence it should offer you to boot form USB
stick (that you dd'ed Fedora's Live ISO image - x86_64 - onto) and you
can install from there.

>
> > While newer version of ACPI standard allow use of device-tree-like
> > properties in device descriptions, the version of ACPI implemented in
> > Google BIOS does not support them, and we have to resort to DMI data to
> > specify exact characteristics of the devices (touchpad vs. touchscreen,
> > GPIO to button mapping, etc).
> >
> > Pixel 1 continues to use i2c devices and platform data created by
> > chromeos-laptop driver, since ACPI does not enumerate them.
> >
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > ---
> > drivers/input/touchscreen/atmel_mxt_ts.c | 149 +++++++++++++++++++++++++++----
> > 1 file changed, 134 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> > index 2875ddf..dfc7309 100644
> > --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> > +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> > @@ -14,6 +14,8 @@
> > *
> > */
> >
> > +#include <linux/acpi.h>
> > +#include <linux/dmi.h>
> > #include <linux/module.h>
> > #include <linux/init.h>
> > #include <linux/completion.h>
> > @@ -724,15 +726,15 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
> > {
> > struct input_dev *input = data->input_dev;
> > const struct mxt_platform_data *pdata = data->pdata;
> > - bool button;
> > int i;
> >
> > - /* Active-low switch */
> > for (i = 0; i < pdata->t19_num_keys; i++) {
> > if (pdata->t19_keymap[i] == KEY_RESERVED)
> > continue;
> > - button = !(message[1] & (1 << i));
> > - input_report_key(input, pdata->t19_keymap[i], button);
> > +
> > + /* Active-low switch */
> > + input_report_key(input, pdata->t19_keymap[i],
> > + !(message[1] & BIT(i)));
> > }
> > }
> >
> > @@ -2371,7 +2373,7 @@ static void mxt_input_close(struct input_dev *dev)
> > }
> >
> > #ifdef CONFIG_OF
> > -static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> > +static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> > {
> > struct mxt_platform_data *pdata;
> > u32 *keymap;
> > @@ -2379,7 +2381,7 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> > int proplen, i, ret;
> >
> > if (!client->dev.of_node)
> > - return ERR_PTR(-ENODEV);
> > + return ERR_PTR(-ENOENT);
> >
> > pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> > if (!pdata)
> > @@ -2410,25 +2412,132 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> > return pdata;
> > }
> > #else
> > -static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> > +static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> > {
> > - dev_dbg(&client->dev, "No platform data specified\n");
> > - return ERR_PTR(-EINVAL);
> > + return ERR_PTR(-ENOENT);
> > }
> > #endif
> >
> > +#ifdef CONFIG_ACPI
> > +
> > +struct mxt_acpi_platform_data {
> > + const char *hid;
> > + struct mxt_platform_data pdata;
> > +};
> > +
> > +static unsigned int samus_touchpad_buttons[] = {
> > + KEY_RESERVED,
> > + KEY_RESERVED,
> > + KEY_RESERVED,
> > + BTN_LEFT
> > +};
> > +
> > +static struct mxt_acpi_platform_data samus_platform_data[] = {
> > + {
> > + /* Touchpad */
> > + .hid = "ATML0000",
> > + .pdata = {
> > + .t19_num_keys = ARRAY_SIZE(samus_touchpad_buttons),
> > + .t19_keymap = samus_touchpad_buttons,
> > + },
> > + },
> > + {
> > + /* Touchscreen */
> > + .hid = "ATML0001",
> > + },
> > + { }
> > +};
>
> It seems a bit wrong to be putting this Pixel-specific platform data in the
> driver file.

Yes, I would love to avoid it, but it int not that we do not have
precedent. We are forced to use a lot of quirks in atkbd.c, synaptics.c
and host of other drivers to account for system quirks. In this
particular case I considered hacking chromeos-laptop to try to provide
platform data, but it is impossible to do cleanly, without leakig memory
all over :( This is because the devices are described in ACPI and so
i2c-core instantiated them for us; but there are no additional data in
ACPI similar to platform data, and ACPI HIDs are shared between all x86
Chromebooks produced so far. If/when we make new x86 ChromeOS
device with Atmel hardware we will make sure to use newer version of
ACPI allowing specifying arbitrary device properties, similar to DT.

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2015-04-09 19:01    [W:0.130 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site