lkml.org 
[lkml]   [2015]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 5/9] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
Date
On current ST platforms the LPC controls a number of functions including
Watchdog and Real Time Clock. This patch provides the bindings used to
configure LPC in Watchdog mode.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
.../devicetree/bindings/watchdog/st_lpc_wdt.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
new file mode 100644
index 0000000..388c88a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
@@ -0,0 +1,38 @@
+STMicroelectronics Low Power Controller (LPC) - Watchdog
+========================================================
+
+LPC currently supports Watchdog OR Real Time Clock functionality.
+
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+
+Required properties
+
+- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc"
+ "st,stih415-lpc" "st,stid127-lpc"
+- reg : LPC registers base address + size
+- interrupts : LPC interrupt line number and associated flags
+- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
+ ST_LPC_MODE_WDT [1]. One (and only one) mode must be
+ selected.
+
+Required properties [watchdog mode]
+
+- st,syscfg : Phandle to syscfg node used to enable watchdog and configure
+ CPU reset type.
+- timeout-sec : Watchdog timeout in seconds
+
+Optional properties [watchdog mode]
+
+- st,warm-reset : If present reset type will be 'warm' - if not it will be cold
+
+Example:
+ lpc@fde05000 {
+ compatible = "st,stih407-lpc";
+ reg = <0xfde05000 0x1000>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ st,syscfg = <&syscfg_core>;
+ timeout-sec = <120>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ st,warm-reset;
+ };
--
1.9.1


\
 
 \ /
  Last update: 2015-04-09 17:21    [W:0.115 / U:2.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site