lkml.org 
[lkml]   [2015]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters
On 31/03/15 12:12, Vignesh R wrote:
> Add optional DT properties to set open delay, sample delay and number
> of averages per sample for each adc step. Open delay, sample delay
> and averaging are some of the parameters that affect the sampling rate
> and accuracy of the sample. Making these parameters configurable via
> DT will help in balancing speed vs accuracy.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
All looks fine to me, but I would ideally like a devicetree
ack on this one.

Jonathan
> ---
> .../bindings/input/touchscreen/ti-tsc-adc.txt | 24 ++++++++++
> drivers/iio/adc/ti_am335x_adc.c | 54 +++++++++++++++++++---
> 2 files changed, 72 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> index 6c4fb34823d3..8aafbe87f0eb 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> @@ -42,6 +42,27 @@ Optional properties:
> hardware knob for adjusting the amount of "settling
> time".
>
> +- child "adc"
> + ti,chan-step-opendelay: List of open delays for each channel of
> + ADC in the order of ti,adc-channels. The
> + value corresponds to the number of ADC
> + clock cycles to wait after applying the
> + step configuration registers and before
> + sending the start of ADC conversion.
> + Maximum value is 0x3FFFF.
> + ti,chan-step-sampledelay: List of sample delays for each channel
> + of ADC in the order of ti,adc-channels.
> + The value corresponds to the number of
> + ADC clock cycles to sample (to hold
> + start of conversion high).
> + Maximum value is 0xFF.
> + ti,chan-step-avg: Number of averages to be performed for each
> + channel of ADC. If average is 16 then input
> + is sampled 16 times and averaged to get more
> + accurate value. This increases the time taken
> + by ADC to generate a sample. Valid range is 0
> + average to 16 averages. Maximum value is 16.
> +
> Example:
> tscadc: tscadc@44e0d000 {
> compatible = "ti,am3359-tscadc";
> @@ -55,5 +76,8 @@ Example:
>
> adc {
> ti,adc-channels = <4 5 6 7>;
> + ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
> + ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
> + ti,chan-step-avg = <16 2 4 8>;
> };
> }
> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> index 2f818405ffbe..5ee597b4a1af 100644
> --- a/drivers/iio/adc/ti_am335x_adc.c
> +++ b/drivers/iio/adc/ti_am335x_adc.c
> @@ -37,6 +37,7 @@ struct tiadc_device {
> u8 channel_step[8];
> int buffer_en_ch_steps;
> u16 data[8];
> + u32 open_delay[8], sample_delay[8], step_avg[8];
> };
>
> static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
> @@ -85,6 +86,7 @@ static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
> static void tiadc_step_config(struct iio_dev *indio_dev)
> {
> struct tiadc_device *adc_dev = iio_priv(indio_dev);
> + struct device *dev = adc_dev->mfd_tscadc->dev;
> unsigned int stepconfig;
> int i, steps = 0;
>
> @@ -98,20 +100,47 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> * needs to be given to ADC to digitalize data.
> */
>
> - if (iio_buffer_enabled(indio_dev))
> - stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
> - | STEPCONFIG_MODE_SWCNT;
> - else
> - stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
>
> for (i = 0; i < adc_dev->channels; i++) {
> int chan;
>
> chan = adc_dev->channel_line[i];
> +
> + if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
> + dev_warn(dev, "chan %d step_avg truncating to %d\n",
> + chan, STEPCONFIG_AVG_16);
> + adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
> + }
> +
> + if (adc_dev->step_avg[i])
> + stepconfig =
> + STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
> + STEPCONFIG_FIFO1;
> + else
> + stepconfig = STEPCONFIG_FIFO1;
> +
> + if (iio_buffer_enabled(indio_dev))
> + stepconfig |= STEPCONFIG_MODE_SWCNT;
> +
> tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
> stepconfig | STEPCONFIG_INP(chan));
> +
> + if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK)alue corresponds to the number of ADC
> + clock cycles to wait after applying the
> + step configuration registers and before
> + sending the start of ADC conversion.
> + Maximum value is 0x3FFFF.
> + ti,chan-step-sampledelay: List of sample delays for each channel
> + of ADC in the order of ti,adc-channels.
> + The value corresponds to the number of
> + ADC clock cycles to sample (to hold
> + start of conversion high).
> + Maximum value is 0xFF.
> + ti,chan-step-avg: Number of averages to be performed for each
> + channel of ADC. If average is 16 then input
> + is sampled 16 times and averaged to get more
> + accurate value. This increases the time taken
> + by ADC to generate a sample. Valid range is 0
> + average to 16 averages. Maximum value is 16. {
> + dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
> + chan);
> + adc_dev->open_delay[i] = STEPDELAY_OPEN_MASK;
> + }
> +
> + if (adc_dev->sample_delay[i] > 0xFF) {
> + dev_warn(dev, "chan %d sample delay truncating to 0xFF\n",
> + chan);
> + adc_dev->sample_delay[i] = 0xFF;
> + }
> +
> tiadc_writel(adc_dev, REG_STEPDELAY(steps),
> - STEPCONFIG_OPENDLY);
> + STEPDELAY_OPEN(adc_dev->open_delay[i]) |
> + STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
> +
> adc_dev->channel_step[i] = steps;
> steps++;
> }
> @@ -407,9 +436,22 @@ static int tiadc_parse_dt(struct platform_device *pdev,
>
> of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
> adc_dev->channel_line[channels] = val;
> +
> + /* Set Default values for optional DT parameters */
> + adc_dev->open_delay[channels] = STEPCONFIG_OPENDLY;
> + adc_dev->sample_delay[channels] = STEPCONFIG_SAMPLEDLY;
> + adc_dev->step_avg[channels] = 16;
> +
> channels++;
> }
>
> + of_property_read_u32_array(node, "ti,chan-step-avg",
> + adc_dev->step_avg, channels);
> + of_property_read_u32_array(node, "ti,chan-step-opendelay",
> + adc_dev->open_delay, channels);
> + of_property_read_u32_array(node, "ti,chan-step-sampledelay",
> + adc_dev->sample_delay, channels);
> +
> adc_dev->channels = channels;
> return 0;
> }
>



\
 
 \ /
  Last update: 2015-04-09 17:01    [W:0.081 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site