lkml.org 
[lkml]   [2015]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
Hi Alexandre,

On Wed, Apr 01, 2015 at 04:52:23AM +0200, Alexandre Belloni wrote:
> From: Philippe De Muyter <phdm@macqel.be>
>
> This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC
> chips. It supports in particular, the supersets AB0805 and AB1805.
> It allows reading and writing the time, and enables the supercapacitor/
> battery charger.
>
> [arnd@arndb.de: abx805 depends on i2c]
> Signed-off-by: Philippe De Muyter <phdm@macqel.be>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
...
> +static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + unsigned char date[8];
> + int err;
> +
> + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
> + sizeof(date), date);
> + if (err < 0) {
> + dev_err(&client->dev, "Unable to read date\n");
> + return -EIO;
> + }
> +
> + tm->tm_sec = bcd2bin(date[ABX8XX_REG_SC] & 0x7F);
> + tm->tm_min = bcd2bin(date[ABX8XX_REG_MN] & 0x7F);
> + tm->tm_hour = bcd2bin(date[ABX8XX_REG_HR] & 0x3F);
> + tm->tm_wday = date[ABX8XX_REG_WD] & 0x7;
> + tm->tm_mday = bcd2bin(date[ABX8XX_REG_DA] & 0x3F);
> + tm->tm_mon = bcd2bin(date[ABX8XX_REG_MO] & 0x1F) - 1;
> + tm->tm_year = bcd2bin(date[ABX8XX_REG_YR]) + 100;

Just a minor nit: I would rather not name the buffer 'date', but 'buf' like
in abx80x_rtc_set_time.

> +
> + err = rtc_valid_tm(tm);
> + if (err < 0)
> + dev_err(&client->dev, "retrieved date/time is not valid.\n");
> +
> + return err;
> +}
> +
> +static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + unsigned char buf[8];
> + int err;
> +
...
> +static const struct i2c_device_id abx80x_id[] = {
> + { "abx80x", ABX80X },

should become
{ "abx80x-rtc", ABX80X },
> + { "ab0801", AB0801 },
> + { "ab0803", AB0803 },
> + { "ab0804", AB0804 },
> + { "ab0805", AB0805 },
> + { "ab1801", AB1801 },
> + { "ab1803", AB1803 },
> + { "ab1804", AB1804 },
> + { "ab1805", AB1805 },
> + { }
and likewise

Best regards

Philippe

--
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles


\
 
 \ /
  Last update: 2015-04-09 16:01    [W:0.074 / U:17.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site