lkml.org 
[lkml]   [2015]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] Documentation: bindings: add abracon,abx80x
Hi Alexandre,

when I look into Documentation/devicetree/bindings/rtc, it seems that
all rtc but a few (mainly old ones) have the "-rtc" suffix in the
"compatible" property.

Would it not be better to keep it here also, like what I had written ?

Best regards

Philippe


On Wed, Apr 01, 2015 at 04:52:22AM +0200, Alexandre Belloni wrote:
> Document the bindings for abracon,abx80x and related compatibles.
>
> Cc: devicetree-discuss@lists.ozlabs.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> .../devicetree/bindings/rtc/abracon,abx80x.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> new file mode 100644
> index 000000000000..6f0d3b2cdd89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> @@ -0,0 +1,32 @@
> +Abracon ABX80X I2C ultra low power RTC/Alarm chip
> +
> +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
> +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
> +is the superset of ab180x.
> +
> +Required properties:
> +
> + - "compatible": should one of:
> + "abracon,abx80x"
> + "abracon,ab0801"
> + "abracon,ab0803"
> + "abracon,ab0804"
> + "abracon,ab0805"
> + "abracon,ab1801"
> + "abracon,ab1803"
> + "abracon,ab1804"
> + "abracon,ab1805"
> + Using "abracon,abx80x" will enable chip autodetection.
> + - "reg": I2C bus address of the device
> +
> +Optional properties:
> +
> +The abx804 and abx805 have a trickle charger that is able to charge the
> +connected battery or supercap. Both the following properties have to be defined
> +and valid to enable charging:
> +
> + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> + resistor, the other values are in ohm.
> +
> +
> --
> 2.1.0

--
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles


\
 
 \ /
  Last update: 2015-04-09 16:01    [W:0.075 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site