lkml.org 
[lkml]   [2015]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.4 090/176] Input: i8042 - reset keyboard to fix Elantech touchpad detection
Date
From: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com>

3.4.107-rc1 review patch. If anyone has any objections, please let me know.

------------------


commit 148e9a711e034e06310a8c36b64957934ebe30f2 upstream.

On some laptops, keyboard needs to be reset in order to successfully detect
touchpad (e.g., some Gigabyte laptop models with Elantech touchpads).
Without resettin keyboard touchpad pretends to be completely dead.

Based on the original patch by Mateusz Jończyk this version has been
expanded to include DMI based detection & application of the fix
automatically on the affected models of laptops. This has been confirmed to
fix problem by three users already on three different models of laptops.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81331
Signed-off-by: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com>
Tested by: Zakariya Dehlawi <zdehlawi@gmail.com>
Tested-by: Guillaum Bouchard <guillaum.bouchard@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
Documentation/kernel-parameters.txt | 1 +
drivers/input/serio/i8042-x86ia64io.h | 32 ++++++++++++++++++++++++++++++++
drivers/input/serio/i8042.c | 14 ++++++++++++++
3 files changed, 47 insertions(+)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 63740da..c7523c4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -979,6 +979,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8042.notimeout [HW] Ignore timeout condition signalled by controller
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
+ i8042.kbdreset [HW] Reset device connected to KBD port

i810= [HW,DRM]

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index ce715b1..f41d199 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -721,6 +721,35 @@ static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
{ }
};

+/*
+ * Some laptops need keyboard reset before probing for the trackpad to get
+ * it detected, initialised & finally work.
+ */
+static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = {
+ {
+ /* Gigabyte P35 v2 - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P35V2"),
+ },
+ },
+ {
+ /* Aorus branded Gigabyte X3 Plus - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X3"),
+ },
+ },
+ {
+ /* Gigabyte P34 - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P34"),
+ },
+ },
+ { }
+};
+
#endif /* CONFIG_X86 */

#ifdef CONFIG_PNP
@@ -1001,6 +1030,9 @@ static int __init i8042_platform_init(void)
if (dmi_check_system(i8042_dmi_dritek_table))
i8042_dritek = true;

+ if (dmi_check_system(i8042_dmi_kbdreset_table))
+ i8042_kbdreset = true;
+
/*
* A20 was already enabled during early kernel init. But some buggy
* BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 8656441..178e75d 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -67,6 +67,10 @@ static bool i8042_notimeout;
module_param_named(notimeout, i8042_notimeout, bool, 0);
MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");

+static bool i8042_kbdreset;
+module_param_named(kbdreset, i8042_kbdreset, bool, 0);
+MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port");
+
#ifdef CONFIG_X86
static bool i8042_dritek;
module_param_named(dritek, i8042_dritek, bool, 0);
@@ -783,6 +787,16 @@ static int __init i8042_check_aux(void)
return -1;

/*
+ * Reset keyboard (needed on some laptops to successfully detect
+ * touchpad, e.g., some Gigabyte laptop models with Elantech
+ * touchpads).
+ */
+ if (i8042_kbdreset) {
+ pr_warn("Attempting to reset device connected to KBD port\n");
+ i8042_kbd_write(NULL, (unsigned char) 0xff);
+ }
+
+/*
* Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
* used it for a PCI card or somethig else.
*/
--
1.9.1


\
 
 \ /
  Last update: 2015-04-09 12:21    [W:0.537 / U:1.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site