lkml.org 
[lkml]   [2015]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mfd: Add support for CPLD chip on Mikrotik RB4xx boards
From
On Tue, Apr 7, 2015 at 6:48 PM, Bert Vermeulen <bert@biot.com> wrote:
> On 07/04/15 08:52, Lee Jones wrote:
>> On Mon, 06 Apr 2015, Bert Vermeulen wrote:
>>
>>> The SPI-connected CPLD chip controls access to the main NAND flash
>>> chip and five LEDs.
>>>
>>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>>> ---
>>> arch/mips/include/asm/mach-ath79/rb4xx_cpld.h | 49 +++++
>>> drivers/mfd/Kconfig | 7 +
>>> drivers/mfd/Makefile | 1 +
>>> drivers/mfd/rb4xx-cpld.c | 279 ++++++++++++++++++++++++++
>>> 4 files changed, 336 insertions(+)
>>> create mode 100644 arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
>>> create mode 100644 drivers/mfd/rb4xx-cpld.c
>>
>> This device doesn't look like an MFD, it rather looks like a CPLD
>> driver. We had a recent submission like this [1], perhaps this will
>> provide another argument for drivers/programmables or something.
>>
>> [1] https://lkml.org/lkml/2015/2/17/42
>
> Yup, got bounced into drivers/mfd after initially submitting it as an SPI
> protocol driver (where it lives in openwrt). Indeed it's not a great fit
> anywhere -- not even programmables: this thing has its firmware on board,
> nothing ever feeds it on startup.
>
> Drivers for CPLDs don't necessarily have anything in common -- these are
> customized chips basically. In this case it's a NAND controller and GPIO/LED
> expander rolled into one.

Then perhaps drivers/misc ?


--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2015-04-07 19:01    [W:0.054 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site