lkml.org 
[lkml]   [2015]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] Cygnus Audio Driver


On 15-04-06 02:58 AM, Mark Brown wrote:
> On Fri, Apr 03, 2015 at 12:33:12PM -0700, Scott Branden wrote:
>> On 15-03-30 11:43 PM, Mark Brown wrote:
>>> On Mon, Mar 30, 2015 at 08:16:22PM -0700, Scott Branden wrote:
>
>>>> The audio PLL is embedded in the audio block and only used
>>>> by the audio block. The audio PLL registers are also in the middle of
>>>> the audio register map.
>
>>> When you say it's only used by the audio block do you mean to say that
>>> the audio block exposes no clock signals other than the bit and frame
>>> clocks?
>
>> The audio block exposes the MCLK in addition to the bit and frame clock.
>
> OK, then it's going to need to be a clock provider at some point - the
> clock will be going into external devices which are going to need to be
> able to interact with the clock (for example, to get the rate).
>
Currently, the ASoC machine driver is responsible for requesting a
certain frequency of MCLK be generated from our driver and then also
sending the frequency information along to the external device (codec).
This is done via the snd_soc_dai_set_sysclk. That is the only clock
interaction we have needed for the core part of the driver. For
enhanced features, we also have the need to make minor adjustments
(tweaks) to the PLL. The tweaks are used to make the PLLs output
frequency match as closely as possible to a true reference frequency.
As such, we would like to provide the finest adjustment resolution as
possible. The clocking framework only seems to allow for a 1 Hz
adjustment. This limitation and the fact that no other device seems to
need to interact directly will the PLL are why we have not put it in the
clocking framework.


\
 
 \ /
  Last update: 2015-04-08 05:01    [W:0.098 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site