lkml.org 
[lkml]   [2015]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: core: add usb3 lpm sysfs
On Thu, Apr 30, 2015 at 12:21:32AM +0800, Zhuang Jin Can wrote:
> On Wed, Apr 29, 2015 at 01:06:22PM +0200, Greg KH wrote:
> > On Wed, Apr 29, 2015 at 06:57:30PM +0800, Zhuang Jin Can wrote:
> > > On Wed, Apr 29, 2015 at 11:01:48AM +0200, Greg KH wrote:
> > > > On Wed, Apr 29, 2015 at 03:20:04PM +0800, Zhuang Jin Can wrote:
> > > > > On Tue, Apr 28, 2015 at 11:11:10PM +0200, Greg KH wrote:
> > > > > > On Wed, Apr 29, 2015 at 12:51:27AM +0800, Zhuang Jin Can wrote:
> > > > > > > Hi Greg KH,
> > > > > > >
> > > > > > > On Tue, Apr 28, 2015 at 12:42:24PM +0200, Greg KH wrote:
> > > > > > > > On Sun, Apr 19, 2015 at 11:46:12AM +0800, Zhuang Jin Can wrote:
> > > > > > > > > Some usb3 devices may not support usb3 lpm well.
> > > > > > > > > The patch adds a sysfs to enable/disable u1 or u2 of the port.The
> > > > > > > > > settings apply to both before and after device enumeration.
> > > > > > > > > Supported values are "0" - u1 and u2 are disabled, "u1" - only u1 is
> > > > > > > > > enabled, "u2" - only u2 is enabled, "u1_u2" - u1 and u2 are enabled.
> > > > > > > > >
> > > > > > > > > The interface is useful for testing some USB3 devices during
> > > > > > > > > development, and provides a way to disable usb3 lpm if the issues can
> > > > > > > > > not be fixed in final products.
> > > > > > > >
> > > > > > > > How is a user supposed to "know" to make this setting for a device? Why
> > > > > > > > can't the kernel automatically set this value properly? Why does it
> > > > > > > > need to be a kernel issue at all?
> > > > > > > >
> > > > > > > By default kernel enables u1 u2 of all USB3 devices. This interface
> > > > > > > provides the user to change this policy. User may set the policy
> > > > > > > according to PID/VID of uevent or according to the platform information
> > > > > > > known by userspace.
> > > > > >
> > > > > > And why would they ever want to do that?
> > > > > >
> > > > > > > It's not a kernel issue, as u1 u2 is mandatory by USB3 compliance. But
> > > > > > > for some internal hardwired USB3 connection, e.g. SSIC, passing USB3
> > > > > > > compliance is not mandatory. So the interface provides a way for vendor
> > > > > > > to ship with u1 or u2 broken products. Of course, this is not encouraged :).
> > > > > >
> > > > > > If the state is broken for those devices, we can't require the user to
> > > > > > fix it for us, the kernel should do it automatically.
> > > > > >
> > > > > > > > And when you are doing development of broken devices, the kernel doesn't
> > > > > > > > have to support you, you can run with debugging patches of your own
> > > > > > > > until you fix your firmware :)
> > > > > > > >
> > > > > > > Understood. But I think other vendor or developer may face the same
> > > > > > > issue in final product shipment or during development. Moreover, the
> > > > > > > interface provide the flexibility for developer to separately
> > > > > > > disable/enable u1 or u2, e.g. If they're debugging an u2 issue, they
> > > > > > > can disable u1 to simplify the situtation.
> > > > > >
> > > > > > For debugging only, perhaps, but for a "normal" user, please let's
> > > > > > handle this automatically and don't create a switch that never gets used
> > > > > > by anyone or anything.
> > > > > >
> > > > > Thanks Greg. Since so far the patch has no interesting value to the
> > > > > community, I'll drop the patch.
> > > >
> > > > I didn't say that, I said it needed some more work to be accepted.
> > > Sorry for misunderstanding. Let me explain more why we need this interface.
> > >
> > > We have a modem USB3 device (in stepping C) hardwired to one specific port of xHCI.
> > > The device was expected to work with u1 u2, however, due to a HW issue, it doesn't
> > > work stably. To workaround the issue, we let the init.rc script disable u1 u2 for
> > > this specific port.
> >
> > Modern Linux systems don't have init.rc scripts anymore :)
> >
> In Android, the init process still reads an init.rc where vendor can
> define their own policies. Vendors normally provides a whole reference
> design (including HW, FW, Kernel, BSP, AOSP) to OEMs. BSP contains
> vendor specific configurations including its own init.rc.

And that's generally not a good idea for companies to do, as they
shouldn't need special hardware workarounds in an init script, but I
understand :(

You are also going to be giving them a kernel patch that is not accepted
upstream which is really NOT the way to do things, and something that
many of us are working quite hard to keep from happening.

> > > Then maybe we want to start debug u1 issue first, to avoid hitting u2 issue,
> > > we can disable u2. After u1 issue is resolved, we can enable back u2 to continue to
> > > debug u2 issue. This provides the flexibility to isolate u1 u2 debugging.
> > > This is valuable I think :)
> >
> > I agree.
> >
> > > The HW issue will be fixed in stepping D, however C and D will have the same PID/VID.
> > > There's no way for kernel to know the difference between C and D.
> > > Even after fixing in D, C will still be used for development (to save money..)
> >
> > That sounds like a big design flaw, what about looking at the version of
> > the device? That's what that field in the USB descriptors is for.
> >
> You're right. bcdDevice should be used for this purpose.

Why can't it?

> However, since we need to live with what we have, we just used the init.rc to disable
> u1/u2. Definitely, it's a ugly hack in userspace to make it "automatically" work.

Why can't you put a quirk in the kernel for that bcdDevice value and
then not need any userspace hacks?

> A better solution is to use monitor uevent, reading bcdDevice + PID/VID, and define
> a rule in to disable u1/u2 of this device. Android provides an uevent machanism to do this.

It's a horrid uevent mechanism in that it duplicates what udev did years
ago :(

> However, how to do it automatically, it's out of the scope of the patch.

Not at all, what if you don't want to run Android on your hardware? You
still want it to work, so get the kernel fix upstream properly.

> Without the patch, the only choice is to add a quirk in usb core to do it automatically. And
> this should be in another separate patch.

Please send that patch.

> With the patch:
> 1. Userspace can also do the quirk with the help of uevent and rules

But it has no idea how or when to do that. Please don't provide hooks
that no one knows how to use.

> 2. Developer can isolate u1 u2 debugging.

That only developer seems to be you, and you've already debugged this :)

> And I don't think it's necessary for kernel to support this broken modem. Because, the modem
> is integrated with the SoC, and SoC goes with init.rc to OEMs. Thus, it doesn't make sense we
> add a quirk in kernel to long term support it. The SoC/Modem is going to be replaced by its next
> generation, especially in mobile area.

Again, someone wants to run a mainline kernel.org release on that
hardware, like they should. Some companies even are pushing to require
OEMs to have all of their changes upstream before they will buy their
chip, so please, make this a quirk and have it "just work" properly. No
need to rely on a magic init.rc value that no one notices or
understands.

thanks,

greg k-h


\
 
 \ /
  Last update: 2015-04-29 22:41    [W:0.072 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site