lkml.org 
[lkml]   [2015]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] iio: magnetometer: mmc35240: Add PM sleep support
Date
We rely on regmap to save the state of the registers at suspend,
and then we do an explicit sync at resume.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
---
drivers/iio/magnetometer/mmc35240.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)

diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index beefebc..7a52c3e 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/regmap.h>
+#include <linux/pm.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -447,6 +448,39 @@ static int mmc35240_probe(struct i2c_client *client,
return devm_iio_device_register(&client->dev, indio_dev);
}

+#ifdef CONFIG_PM_SLEEP
+static int mmc35240_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct mmc35240_data *data = iio_priv(indio_dev);
+
+ regcache_cache_only(data->regmap, true);
+
+ return 0;
+}
+
+static int mmc35240_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct mmc35240_data *data = iio_priv(indio_dev);
+ int ret;
+
+ regcache_mark_dirty(data->regmap);
+ ret = regcache_sync_region(data->regmap, MMC35240_REG_CTRL0,
+ MMC35240_REG_CTRL1);
+ if (ret < 0)
+ dev_err(dev, "Failed to restore control registers\n");
+
+ regcache_cache_only(data->regmap, false);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops mmc35240_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mmc35240_suspend, mmc35240_resume)
+};
+
static const struct i2c_device_id mmc35240_id[] = {
{"MMC35240", 0},
{}
@@ -456,6 +490,7 @@ MODULE_DEVICE_TABLE(i2c, mmc35240_id);
static struct i2c_driver mmc35240_driver = {
.driver = {
.name = MMC35240_DRV_NAME,
+ .pm = &mmc35240_pm_ops,
},
.probe = mmc35240_probe,
.id_table = mmc35240_id,
--
1.9.1


\
 
 \ /
  Last update: 2015-04-24 18:41    [W:0.111 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site