lkml.org 
[lkml]   [2015]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Thunderbolt hotplug not working on MacMini7,1
On Thu, Apr 23, 2015 at 8:12 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote:
> On Thu, Apr 23, 2015 at 12:08:01PM +0200, Andreas Noever wrote:
>> Hi Adam,
>>
>> On my system (MacBookPro10,1 - 4 channel TB1) the bridges and the
>> controller both use 0x1547 and are only differentiated by
>> subvendor/subdevice.
>
> Do they have the same PCI class?
No, 0604 for the bridges and 0880 for the device.

It looks like the only reason that the bridges do not have a
subsystem/subvendor set is because there is no such field in the pci
bridge header. Instead they put 2222:1111 into the SSVID capability:

06:06.0 PCI bridge [0604]: Intel Corporation Unknown device
[8086:1547] (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=06, secondary=08, subordinate=08, sec-latency=0
Capabilities: [80] Power Management version 3
Capabilities: [88] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [ac] Subsystem: Unknown device [2222:1111]
Capabilities: [c0] Express Downstream Port (Slot+), MSI 00
Capabilities: [100] #8086

07:00.0 System peripheral [0880]: Intel Corporation Unknown device
[8086:1547] (rev 03)
Subsystem: Unknown device [2222:1111]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at c1d00000 (32-bit, non-prefetchable)
Memory at c1d40000 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 3
Capabilities: [88] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [ac] Subsystem: Unknown device [2222:1111]
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=16
Capabilities: [100] #8086

pci_setup_device actually reads this capability and puts it into
dev->subsystem_vendor/device. So we might actually get bound to the
bridges (if the pcieport driver is unavailable). I'll post a patch to
bind to the class code instead. Good idea!

Andreas


\
 
 \ /
  Last update: 2015-04-24 14:21    [W:0.077 / U:1.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site