lkml.org 
[lkml]   [2015]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver
Date
On Thursday, April 23, 2015 04:32:25 PM Suthikulpanit, Suravee wrote:
> Mika/Rafael,
>
> If there are no other concerns about this patch series, do you think this
> ready to be pushed to linux-next tree along with the rest of the ARM64
> ACPI patch series from Linaro?

There are concerns regarding patch [1/3] from Bob and Lv (please look at the
last message from Bob in this thread for details).


> >On 3/30/2015 4:56 PM, Suravee Suthikulpanit wrote:
> >> This patch series introduce ACPI support for AHCI platform driver.
> >> Existing ACPI support for AHCI assumes the device controller is a PCI
> >>device.
> >> Since there is no ACPI _CID for generic AHCI controller, the driver
> >> could not use it for matching devices. Therefore, this patch introduces
> >> a mechanism for drivers to match devices using ACPI _CLS method.
> >> _CLS contains PCI-defined class-code.
> >>
> >> This patch series also modifies ACPI modalias to add class-code to the
> >> exisiting format, which currently only uses _HID and _CIDs. This is
> >>required
> >> to support loadable modules w/ _CLS.
> >>
> >> This is rebased from and tested with:
> >>
> >> http://git.linaro.org/leg/acpi/acpi.git acpi-5.1-v11
> >>
> >> This topic was discussed earlier here (as part of introducing support
> >>for
> >> AMD Seattle SATA controller):
> >>
> >> http://marc.info/?l=linux-arm-kernel&m=141083492521584&w=2
> >>
> >> Changes from V7 (https://lkml.org/lkml/2015/3/26/592)
> >> * [1/3] Return AE_AML_OPERAND_TYPE when _CLS package containing
> >> invalid type (per Robert Moore suggestion).
> >> * [2/3] Fixed build error due missing ACPI_DEVICE_CLASS definition
> >> when disabling ACPI.
> >>
> >> Changes from V6 (https://lkml.org/lkml/2015/3/25/797)
> >> * Adding Acked-by Mika, and Reviewed-by Hanjun
> >> * Minor clen up to use lower case 0xffffff for cls_msk
> >> (per Mika suggestions).
> >> * Modify the ACPI_DEVICE_CLASS macro to use designated initializer
> >> (per Mika suggestions).
> >>
> >> Changes from V5 (https://lkml.org/lkml/2015/3/6/24)
> >> * Rebased and tested with acpi-5.1-v11
> >> * Splitting up the ACPICA changes into a separate patch [1/3].
> >> (per Mika suggestion)
> >> * Adding class-code mask support (per Mika suggestion)
> >> * Use macro to define struct acpi_device_id entry (per Mika suggestion)
> >> * Note: Mika also recommend reordering the member of struct
> >>acpi_device_id
> >> and define a macro to be used for declaring each table entry. This
> >>is a
> >> large amount of changes, and will be done separtely from this patch
> >>series.
> >>
> >> Changes from V4 (https://lkml.org/lkml/2015/3/2/56)
> >> * [1/2] Bug fixed: Reorder the declaration of
> >> struct acpi_pnp_device_id cls in the struct acpi_device_info
> >> (include/acpi/actypes.h) since compatible_id_list must be last one.
> >> * [2/2] Added Acked-by: Tejun Heo <tj@kernel.org>
> >>
> >> Changes from V3 (https://lkml.org/lkml/2015/2/8/106)
> >> * Instead of introducing new structure acpi_device_cls, add cls into
> >> the acpi_device_id, and modify the __acpi_match_device
> >> to also match for cls. (per Mika suggestion.)
> >> * Add loadable module support, which requires changes in ACPI
> >> modalias. (per Mika suggestion.)
> >> * Rebased and tested with acpi-5.1-v9
> >>
> >> Changes from V2 (https://lkml.org/lkml/2015/1/5/662)
> >> * Update with review comment from Rafael in patch 1/2
> >> * Rebased and tested with acpi-5.1-v8
> >>
> >> Changes from V1 (https://lkml.org/lkml/2014/12/19/345)
> >> * Rebased to 3.19.0-rc2
> >> * Change from acpi_cls in device_driver to acpi_match_cls (Hanjun
> >>comment)
> >> * Change the matching logic in acpi_driver_match_device() due to the
> >>new
> >> special PRP0001 _HID.
> >> * Simplify the return type of acpi_match_device_cls() to boolean.
> >>
> >> Changes from RFC (https://lkml.org/lkml/2014/12/17/446)
> >> * Remove #ifdef and make non-ACPI version of the acpi_match_device_cls
> >> as inline. (per Arnd)
> >> * Simplify logic to retrieve and evaluate _CLS handle. (per Hanjun)
> >>
> >> Suravee Suthikulpanit (3):
> >> ACPICA: Add ACPI _CLS processing
> >> ACPI / scan: Add support for ACPI _CLS device matching
> >> ata: ahci_platform: Add ACPI _CLS matching
> >>
> >> drivers/acpi/acpica/acutils.h | 3 ++
> >> drivers/acpi/acpica/nsxfname.c | 21 +++++++++--
> >> drivers/acpi/acpica/utids.c | 73
> >>+++++++++++++++++++++++++++++++++++++++
> >> drivers/acpi/scan.c | 36 ++++++++++++++++---
> >> drivers/ata/Kconfig | 2 +-
> >> drivers/ata/ahci_platform.c | 9 +++++
> >> include/acpi/acnames.h | 1 +
> >> include/acpi/actypes.h | 4 ++-
> >> include/linux/acpi.h | 14 ++++++++
> >> include/linux/mod_devicetable.h | 2 ++
> >> scripts/mod/devicetable-offsets.c | 2 ++
> >> scripts/mod/file2alias.c | 32 +++++++++++++++--
> >> 12 files changed, 189 insertions(+), 10 deletions(-)
> >>
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2015-04-23 19:01    [W:0.084 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site