lkml.org 
[lkml]   [2015]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 3/3] iio: magn: bmc150_magn: Add devicetree binding documentation
Date


> -----Original Message-----
> From: linux-iio-owner@vger.kernel.org [mailto:linux-iio-owner@vger.kernel.org] On Behalf Of Jonathan Cameron
> Sent: 18 April, 2015 21:09
> To: Tirdea, Irina; linux-iio@vger.kernel.org; devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org; Hartmut Knaack; Lars-Peter Clausen; Peter Meerwald; Rob Herring; Pawel Moll; Mark Rutland; Ian
> Campbell; Kumar Gala
> Subject: Re: [PATCH 3/3] iio: magn: bmc150_magn: Add devicetree binding documentation
>
> On 17/04/15 11:50, Irina Tirdea wrote:
> > Add binding documentation for Bosch BMC150 magnetometer.
> >
> > Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> > ---
> > .../bindings/iio/magnetometer/bmc150_magn.txt | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> >
> > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> > new file mode 100644
> > index 0000000..4ed035c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> > @@ -0,0 +1,20 @@
> > +* Bosch BMC150 magnetometer sensor
> > +
> > +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
> > +
> > +Required properties:
> > +
> > + - compatible : should be "bosch,bmc150_magn"
> > + - reg : the I2C address of the magnetometer
> > +
> > +Optional properties:
> > +
> > + - gpios : should be device tree identifier of the magnetometer DRDY pin
> Hmm. Under device tree this should be done as an interrupt. You only
> (currently) need the dubious frig with gpios for ACPI I think.
Using the gpios declared like this, it will go the same code path as the ACPI.
I wasn't sure which to list in the optional properties, so I used gpios because the other magnetometer device tree
bindings listed also gpios.

It is better to specify the interrupt directly since it will be handled by the core, so I will remove gpios and list interrupts
instead.

Thanks,
Irina

> > +
> > +Example:
> > +
> > +bmc150_magn@12 {
> > + compatible = "bosch,bmc150_magn";
> > + reg = <0x12>;
> > + interrupt-gpio = <&gpio1 0 1>;
> > +};
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-04-22 15:21    [W:0.068 / U:1.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site