lkml.org 
[lkml]   [2015]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH v2 1/2] extcon: arizona: Add support for select accessory detect mode when headphone detection
On Tue, Apr 21, 2015 at 01:11:44PM +0900, Inha Song wrote:
> This patch add support for select accessory detect mode to HPDETL or HPDETR.
> Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins
> to measure the impedance of an external load connected to the headphone.
>
> Depending on board design, headphone detect pins can change to HPDETR or HPDETL.
>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> ---
> drivers/extcon/extcon-arizona.c | 28 ++++++++++++++++++++--------
> include/dt-bindings/mfd/arizona.h | 8 ++++++++
> include/linux/mfd/arizona/pdata.h | 3 +++
> 3 files changed, 31 insertions(+), 8 deletions(-)
> create mode 100644 include/dt-bindings/mfd/arizona.h
>
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index 63f01c4..c827342 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -32,13 +32,10 @@
> #include <linux/mfd/arizona/core.h>
> #include <linux/mfd/arizona/pdata.h>
> #include <linux/mfd/arizona/registers.h>
> +#include <dt-bindings/mfd/arizona.h>
>
> #define ARIZONA_MAX_MICD_RANGE 8
>
> -#define ARIZONA_ACCDET_MODE_MIC 0
> -#define ARIZONA_ACCDET_MODE_HPL 1
> -#define ARIZONA_ACCDET_MODE_HPR 2
> -
> #define ARIZONA_MICD_CLAMP_MODE_JDL 0x4
> #define ARIZONA_MICD_CLAMP_MODE_JDH 0x5
> #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
> @@ -653,9 +650,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
> ret = regmap_update_bits(arizona->regmap,
> ARIZONA_ACCESSORY_DETECT_MODE_1,
> ARIZONA_ACCDET_MODE_MASK,
> - ARIZONA_ACCDET_MODE_HPL);
> + arizona->pdata.hpdet_channel);
> if (ret != 0) {
> - dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
> + dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
> goto err;
> }
>
> @@ -705,9 +702,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
> ARIZONA_ACCESSORY_DETECT_MODE_1,
> ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
> info->micd_modes[0].src |
> - ARIZONA_ACCDET_MODE_HPL);
> + arizona->pdata.hpdet_channel);
> if (ret != 0) {
> - dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
> + dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
> goto err;
> }
>
> @@ -1103,6 +1100,16 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,
> regmap_update_bits(arizona->regmap, reg, mask, level);
> }
>
> +static int arizona_extcon_of_get_pdata(struct arizona *arizona)
> +{
> + struct arizona_pdata *pdata = &arizona->pdata;
> +
> + of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel",
> + &pdata->hpdet_channel);

I think we need to verify this is either HPL or HPR and default
it to HPL if isn't one of those. Otherwise this looks fine.

Thanks,
Charles


\
 
 \ /
  Last update: 2015-04-21 11:41    [W:0.062 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site