lkml.org 
[lkml]   [2015]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] ASoC: tas571x: Add DT binding document
On Sat, Apr 18, 2015 at 4:16 AM, Mark Brown <broonie@kernel.org> wrote:
> On Wed, Apr 15, 2015 at 02:42:19PM -0700, Kevin Cernekee wrote:
>
>> +- VDD-supply: regulator phandle for the AVDD/DVDD/HP_VDD supply
>
> This is clearly not correct - if there are three separate physical
> supplies there should be three separate regulators requested. They may
> all resolve to one physical regulator on the board you are working with
> but that might not be true on other boards.

In the "simplified diagram," TI shows a single AVDD/DVDD/HP_VDD supply:

http://www.ti.com/lit/ds/symlink/tas5717.pdf#2

Page 20 also suggests the use of a single 3.3V supply for AVDD/DVDD/HP_VDD.

But this combines a number of separate pins. On 5711 we have
dedicated pins for:

PVDD_A
PVDD_B
PVDD_C
PVDD_D
AVDD
DVDD

On 5717 we have dedicated pins for:

PVDD_AB
PVDD_CD
AVDD
DVDD
HPVDD

I didn't see anything in the datasheet suggesting it is OK to have
different voltages or power states on the various supply pins (other
than the special voltage on PVDD).

I can add as many regulator entries as appropriate. What do you recommend?


\
 
 \ /
  Last update: 2015-04-20 23:21    [W:0.178 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site