lkml.org 
[lkml]   [2015]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/5] mmc: mediatek: Add PM support for MMC driver
On Tue, Mar 17, 2015 at 11:13:53AM +0800, Chaotian Jing wrote:
> Add PM support for Mediatek MMC driver
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 93 insertions(+), 1 deletion(-)
>
> @@ -1003,6 +1042,8 @@ static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
>
> if (!IS_ERR(mmc->supply.vqmmc)) {
>
> + pm_runtime_get_sync(host->dev);
> +
> if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> min_uv = 3300000;
> max_uv = 3300000;
> @@ -1011,6 +1052,9 @@ static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
> max_uv = 1800000;
> } else {
> dev_err(host->dev, "Unsupported signal voltage!\n");
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> return -EINVAL;
> }
>
> @@ -1022,6 +1066,8 @@ static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
> }
> }
>
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);

This is unbalanced. You do a pm_runtime_get_sync() depending on
!IS_ERR(mmc->supply.vqmmc), but you call pm_runtime_put_autosuspend()
unconditionally. Besides, I don't see that the pm_ops are necessary here
at all. This function does nothing on the controller.

Sascha


--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2015-04-20 09:21    [W:0.041 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site