lkml.org 
[lkml]   [2015]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2 1/3] watchdog: imgpdc: Allow timeout to be set in device-tree
From
On Wed, Apr 1, 2015 at 6:08 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On 04/01/2015 03:22 PM, James Hogan wrote:
>>
>> Hi Andrew,
>>
>> On Wed, Apr 01, 2015 at 10:43:14AM -0700, Andrew Bresticker wrote:
>>>
>>> Since the heartbeat is statically initialized to its default value,
>>> watchdog_init_timeout() will never look in the device-tree for a
>>> timeout-sec value. Instead of statically initializing heartbeat,
>>> fall back to the default timeout value if watchdog_init_timeout()
>>> fails.
>>
>>
>> Whoops. Sorry about that. I wasn't aware that a timeout-sec value was
>> expected. It isn't mentioned in the DT binding documentation for this
>> device :-(.
>>
>>>
>>> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
>>> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
>>> Cc: James Hogan <james.hogan@imgtec.com>
>>> ---
>>> New for v2.
>>> ---
>>> drivers/watchdog/imgpdc_wdt.c | 6 +++---
>>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/watchdog/imgpdc_wdt.c
>>> b/drivers/watchdog/imgpdc_wdt.c
>>> index 0deaa4f..89b2abc 100644
>>> --- a/drivers/watchdog/imgpdc_wdt.c
>>> +++ b/drivers/watchdog/imgpdc_wdt.c
>>> @@ -42,7 +42,7 @@
>>> #define PDC_WDT_MIN_TIMEOUT 1
>>> #define PDC_WDT_DEF_TIMEOUT 64
>>>
>>> -static int heartbeat = PDC_WDT_DEF_TIMEOUT;
>>> +static int heartbeat;
>>> module_param(heartbeat, int, 0);
>>> MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
>>> "(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
>>> @@ -195,9 +195,9 @@ static int pdc_wdt_probe(struct platform_device
>>> *pdev)
>>>
>>> ret = watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat,
>>> &pdev->dev);
>>> if (ret < 0) {
>>> - pdc_wdt->wdt_dev.timeout = pdc_wdt->wdt_dev.max_timeout;
>>> + pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
>>
>>
>> The watchdog_init_timeout kerneldoc comment suggests that the old value
>> should be the default timeout, i.e. that timeout should be set to
>> PDC_WDT_DEF_TIMEOUT before calling watchdog_init_timeout, rather than
>> whenever ret < 0.
>>
>> Indeed, if heartbeat is set to an invalid non-zero value,
>> watchdog_init_timeout will still try and set timeout from DT, but also
>> still returns -EINVAL regardless of whether that succeeds, and this
>> would incorrectly override the timeout from DT with the hardcoded
>> default.
>>
>>> dev_warn(&pdev->dev,
>>> - "Initial timeout out of range! setting max
>>> timeout\n");
>>> + "Initial timeout out of range! setting default
>>> timeout\n");
>>
>>
>> It feels wrong for a presumably safe & normal situation (i.e. no default
>> in DT, which arguably shouldn't contain policy anyway) to show a
>> warning, but it can also show due to an invalid module parameter (or
>> invalid DT property) which is most definitely justified.
>>
>
> Agreed. I would suggest to leave that part alone and set the default prior
> to calling watchdog_init_timeout().

Yes, but I think James' concern here was that we'd now get a
dev_warn() in the normal case where no timeout is specified via module
parameter or DT.


\
 
 \ /
  Last update: 2015-04-02 19:21    [W:1.798 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site