lkml.org 
[lkml]   [2015]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] psmouse - focaltech pass finger width to userspace
Date
Focaltech touchpads report finger width in packet[5] of absolute packet.
Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
0xff is reported, when a large contact area is detected.
This can be handled in userspace.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
---
drivers/input/mouse/focaltech.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c
index 23d2594..32f810c 100644
--- a/drivers/input/mouse/focaltech.c
+++ b/drivers/input/mouse/focaltech.c
@@ -105,6 +105,16 @@ struct focaltech_hw_state {

/* True if the clickpad has been pressed. */
bool pressed;
+
+ /*
+ * Finger width 0-7 and 15 for 'latching'
+ * 15 value stays until the finger is released
+ * Width is reported only when 1 finger is active
+ */
+ unsigned int width;
+
+ /* Finger count */
+ unsigned int count;
};

struct focaltech_data {
@@ -137,10 +147,12 @@ static void focaltech_report_state(struct psmouse *psmouse)
input_report_abs(dev, ABS_MT_POSITION_X, clamped_x);
input_report_abs(dev, ABS_MT_POSITION_Y,
priv->y_max - clamped_y);
+ if (state->count == 1)
+ input_report_abs(dev, ABS_TOOL_WIDTH, state->width);
}
}
- input_mt_report_pointer_emulation(dev, true);
-
+ input_mt_report_finger_count(dev, state->count);
+ input_mt_report_pointer_emulation(dev, false);
input_report_key(psmouse->dev, BTN_LEFT, state->pressed);
input_sync(psmouse->dev);
}
@@ -152,13 +164,16 @@ static void focaltech_process_touch_packet(struct psmouse *psmouse,
struct focaltech_hw_state *state = &priv->state;
unsigned char fingers = packet[1];
int i;
+ int count = 0;

state->pressed = (packet[0] >> 4) & 1;

/* the second byte contains a bitmap of all fingers touching the pad */
for (i = 0; i < FOC_MAX_FINGERS; i++) {
- state->fingers[i].active = fingers & 0x1;
- if (!state->fingers[i].active) {
+ if (fingers & 0x1) {
+ state->fingers[i].active = true;
+ count++;
+ } else {
/*
* Even when the finger becomes active again, we still
* will have to wait for the first valid position.
@@ -167,6 +182,7 @@ static void focaltech_process_touch_packet(struct psmouse *psmouse,
}
fingers >>= 1;
}
+ state->count = count;
}

static void focaltech_process_abs_packet(struct psmouse *psmouse,
@@ -187,6 +203,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse,

state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
state->fingers[finger].y = (packet[3] << 8) | packet[4];
+ state->width = packet[5] >> 4;
state->fingers[finger].valid = true;
}

@@ -331,6 +348,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)
__set_bit(EV_ABS, dev->evbit);
input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
+ input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
}
--
1.9.1


\
 
 \ /
  Last update: 2015-04-19 15:21    [W:0.038 / U:1.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site