lkml.org 
[lkml]   [2015]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH 1/2] extcon: arizona: Add support for select accessory detect mode when headphone detection"
Hi,

Thanks for your comments,


On Fri, 17 Apr 2015 10:00:47 +0100
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> wrote:

> On Fri, Apr 17, 2015 at 05:32:58PM +0900, Inha Song wrote:
> > This patch add support for select accessory detect mode to HPDETL or HPDETR.
> > Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins
> > to measure the impedance of an external load connected to the headphone.
> >
> > Depending on board design, headphone detect pins can change to HPDETR or HPDETL.
> >
> > Signed-off-by: Inha Song <ideal.song@samsung.com>
> > ---
> > drivers/extcon/extcon-arizona.c | 34 ++++++++++++++++++++++++++++++----
> > include/linux/mfd/arizona/pdata.h | 3 +++
> > 2 files changed, 33 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> > index 63f01c4..7bc9159 100644
> > --- a/drivers/extcon/extcon-arizona.c
> > +++ b/drivers/extcon/extcon-arizona.c
> > @@ -95,6 +95,7 @@ struct arizona_extcon_info {
> > int jack_flips;
> >
> > int hpdet_ip;
> > + int hpdet_channel;
>
> Don't really think this is necessary we can just use the pdata
> value where required doesn't add much copying it to extcon_info.
>

OK,


> >
> > struct extcon_dev *edev;
> > };
> > @@ -653,9 +654,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
> > ret = regmap_update_bits(arizona->regmap,
> > ARIZONA_ACCESSORY_DETECT_MODE_1,
> > ARIZONA_ACCDET_MODE_MASK,
> > - ARIZONA_ACCDET_MODE_HPL);
> > + info->hpdet_channel);
> > if (ret != 0) {
> > - dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
> > + dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
> > goto err;
> > }
> >
> > @@ -705,9 +706,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
> > ARIZONA_ACCESSORY_DETECT_MODE_1,
> > ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
> > info->micd_modes[0].src |
> > - ARIZONA_ACCDET_MODE_HPL);
> > + info->hpdet_channel);
> > if (ret != 0) {
> > - dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
> > + dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
> > goto err;
> > }
> >
> > @@ -1103,6 +1104,23 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,
> > regmap_update_bits(arizona->regmap, reg, mask, level);
> > }
> >
> > +#ifdef CONFIG_OF
> > +static int arizona_of_get_extcon_pdata(struct arizona *arizona)
> > +{
> > + struct arizona_pdata *pdata = &arizona->pdata;
> > +
> > + of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel",
> > + &pdata->hpdet_channel);
> > +
> > + return 0;
> > +}
> > +#else
> > +static inline int arizona_of_get_extcon_pdata(struct arizona *arizona)
> > +{
> > + return 0;
> > +}
> > +#endif
> > +
>
> I believe it is preferred to leave this as not ifdef'ed...
>
> > static int arizona_extcon_probe(struct platform_device *pdev)
> > {
> > struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
> > @@ -1120,6 +1138,9 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> > if (!info)
> > return -ENOMEM;
> >
> > + if (!dev_get_platdata(arizona->dev))
> > + arizona_of_get_extcon_pdata(arizona);
>
> And to wrap this in an if (IS_ENABLED(CONFIG_OF)).

OK, I will fix. And I will also change to arizona_extcon_of_get_pdata().

>
> > +
> > info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
> > if (IS_ERR(info->micvdd)) {
> > ret = PTR_ERR(info->micvdd);
> > @@ -1338,6 +1359,11 @@ static int arizona_extcon_probe(struct platform_device *pdev)
> >
> > arizona_extcon_set_mode(info, 0);
> >
> > + if (arizona->pdata.hpdet_channel)
> > + info->hpdet_channel = ARIZONA_ACCDET_MODE_HPR;
> > + else
> > + info->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
> > +
>
> Just move the two defines in include/dt-bindings/mfd/arizona.h
> and have the pdata get set directly to one of the values.

Ok, I agree. But I have a question.
Should I also move ACCDET_MODE_MIC define to dt-bindings header?

>
> > pm_runtime_enable(&pdev->dev);
> > pm_runtime_idle(&pdev->dev);
> > pm_runtime_get_sync(&pdev->dev);
> > diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
> > index 4578c72..feb5903 100644
> > --- a/include/linux/mfd/arizona/pdata.h
> > +++ b/include/linux/mfd/arizona/pdata.h
> > @@ -139,6 +139,9 @@ struct arizona_pdata {
> > /** GPIO used for mic isolation with HPDET */
> > int hpdet_id_gpio;
> >
> > + /** Channel to use for headphone detection */
> > + int hpdet_channel;
>
> Lets use and unsigned here, we don't need it to be signed and it
> saves type issues with read_u32.

OK,

Best Regards,
Inha Song.

>
> > +
> > /** Extra debounce timeout used during initial mic detection (ms) */
> > int micd_detect_debounce;
> >
> > --
> > 2.0.0.390.gcb682f8
> >
>
> Thanks,
> Charles
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel


\
 
 \ /
  Last update: 2015-04-20 04:21    [W:0.133 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site