lkml.org 
[lkml]   [2015]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/14] MIPS: Add a basic dtsi for the AR9132
Date
A basic dtsi for the AR9132 with support for the DDR controller, CPU
and MISC interrupt controller, GPIO controller, the UART and the
watchdog.

Signed-off-by: Alban Bedel <albeu@free.fr>
---
arch/mips/boot/dts/ar9132.dtsi | 119 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
create mode 100644 arch/mips/boot/dts/ar9132.dtsi

diff --git a/arch/mips/boot/dts/ar9132.dtsi b/arch/mips/boot/dts/ar9132.dtsi
new file mode 100644
index 0000000..ede58cd
--- /dev/null
+++ b/arch/mips/boot/dts/ar9132.dtsi
@@ -0,0 +1,119 @@
+/ {
+ compatible = "qca,ar9132";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ cpuintc: cpuintc {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: ddr-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart@18020000 {
+ compatible = "ns8250";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll 2>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9132-gpio",
+ "qca,ar9130-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9132-ppl",
+ "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll 2>;
+ clock-names = "wdt";
+ };
+
+ miscintc: miscintc@18060010 {
+ compatible = "qca,ar9132-misc-intc",
+ qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ };
+ };
+};
--
2.0.0


\
 
 \ /
  Last update: 2015-04-18 18:21    [W:0.147 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site