lkml.org 
[lkml]   [2015]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] iio: magn: bmc150_magn: Add devicetree binding documentation
On 17/04/15 11:50, Irina Tirdea wrote:
> Add binding documentation for Bosch BMC150 magnetometer.
>
> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> ---
> .../bindings/iio/magnetometer/bmc150_magn.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> new file mode 100644
> index 0000000..4ed035c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> @@ -0,0 +1,20 @@
> +* Bosch BMC150 magnetometer sensor
> +
> +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
> +
> +Required properties:
> +
> + - compatible : should be "bosch,bmc150_magn"
> + - reg : the I2C address of the magnetometer
> +
> +Optional properties:
> +
> + - gpios : should be device tree identifier of the magnetometer DRDY pin
Hmm. Under device tree this should be done as an interrupt. You only
(currently) need the dubious frig with gpios for ACPI I think.
> +
> +Example:
> +
> +bmc150_magn@12 {
> + compatible = "bosch,bmc150_magn";
> + reg = <0x12>;
> + interrupt-gpio = <&gpio1 0 1>;
> +};
>



\
 
 \ /
  Last update: 2015-04-18 20:21    [W:0.082 / U:4.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site