lkml.org 
[lkml]   [2015]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[RESEND PATCH V2 2/2] devicetree: Add bindings for DA9063 OnKey
From: Steve Twiss <stwiss.opensource@diasemi.com>

Add device tree bindings for the DA9063 OnKey driver


Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>

---
Changes from PATCH V1 to V2
---------------------------
- Remove the circular dependency comment linking patches in the main e-mail
- Search and replace 'keyword' with 'property' in onkey sub-node description
- Reformat onkey sub-node content to move the description for disable-key-power
into a new optional properties sub-section so it has a more promiment
position

This patch applies against linux-next and v4.0-rc6


Documentation/devicetree/bindings/mfd/da9063.txt | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 42c6fa6..c671784 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -2,9 +2,10 @@

DA9093 consists of a large and varied group of sub-devices (I2C Only):

-Device Supply Names Description
------- ------------ -----------
+Device Supply Names Description
+------ ------------ -----------
da9063-regulator : : LDOs & BUCKs
+da9063-onkey : : On Key
da9063-rtc : : Real-Time Clock
da9063-watchdog : : Watchdog

@@ -51,6 +52,18 @@ Sub-nodes:
the DA9063. There are currently no entries in this binding, however
compatible = "dlg,da9063-rtc" should be added if a node is created.

+- onkey : This node defines the OnKey settings for controlling the key
+ functionality of the device. The node should contain the compatible property
+ with the value "dlg,da9063-onkey".
+
+ Optional onkey properties:
+
+ - dlg,disable-key-power : Disable power-down using a long key-press. If this
+ entry exists the OnKey driver will remove support for the KEY_POWER key
+ press. If this entry does not exist then by default the key-press
+ triggered power down is enabled and the OnKey will support both KEY_POWER
+ and KEY_SLEEP.
+
- watchdog : This node defines settings for the Watchdog timer associated
with the DA9063. There are currently no entries in this binding, however
compatible = "dlg,da9063-watchdog" should be added if a node is created.
@@ -73,6 +86,11 @@ Example:
compatible = "dlg,da9063-watchdog";
};

+ onkey {
+ compatible = "dlg,da9063-onkey";
+ dlg,disable-key-power;
+ };
+
regulators {
DA9063_BCORE1: bcore1 {
regulator-name = "BCORE1";
--
end-of-patch for RESEND PATCH V2


\
 
 \ /
  Last update: 2015-04-17 14:21    [W:0.132 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site