lkml.org 
[lkml]   [2015]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/9] wm5110 Boot Fixups
Date
Ok so I have completed the rework to the second of the two patch
chains on this and pulled them back together into one series.

Note the main difference is I have pulled a couple patches from
the second series to the start of the chain. This is because of
patch 3 which is a bug fix for 5102 I have discovered whilst
working through this better system suspend support stuff.

Changes since v1:
- Just updated the return of wm5110_apply_sleep_patch to use the
ternary as per Lee's preference.

Thanks,
Charles

Charles Keepax (9):
mfd: arizona: Use devres to manage reset GPIO
mfd: arizona: Factor out hard reset into helper functions
mfd: wm5102: Ensure we always boot the device fully
mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch
mfd: wm5110: Add register patch required for low power sleep
regulator: arizona-ldo1: Add additional supported voltage
mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode
mfd: arizona: Add better support for system suspend
mfd: wm5110: Add delay before releasing reset line

drivers/mfd/arizona-core.c | 341 ++++++++++++++++++++++++++++++++------
drivers/regulator/arizona-ldo1.c | 15 ++
include/linux/mfd/arizona/core.h | 1 +
3 files changed, 302 insertions(+), 55 deletions(-)

--
1.7.2.5



\
 
 \ /
  Last update: 2015-04-17 11:21    [W:0.132 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site