[lkml]   [2015]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net 0/5] stmmac: Correct flow control configuration
From: Vince Bridgers <>
Date: Wed, 15 Apr 2015 11:17:37 -0500

> This series of patches corrects flow control configuration for the Synopsys
> GMAC driver.
> Flow control is configured based on a configurable receive fifo size. If
> less than 4Kbytes flow control is left disabled and a warning is presented. If
> a receive fifo size is not specified, flow control is left disabled to
> maintain current behavior. Unicast pause detection was disabled, but is now
> enabled. The pause time was modified to be maximum time per a XON/XOFF
> flow control mode of operation.
> This patch was tested on an Altera Cyclone 5 and an Altera Arria 10 devkit,
> and verified that flow control operates as expected when enabled.
> Please consider this series for inclusion so that flow control will
> function as expected for the Synopsys GMAC controller.

Series applied, thanks.

 \ /
  Last update: 2015-04-16 20:21    [W:0.081 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site