lkml.org 
[lkml]   [2015]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net 4/5] stmmac: Enable unicast pause frame detect in GMAC Register 6
Date
Unicast pause frame detect was not being enabled for the Synopsys stmmac. This
patch sets Unicast pause frame detect in MAC register 6 so that pause frame
detection by the stmmac conforms to IEEE 802.3, Annex 31B.3.3 Receive
Operation - Specifically, a MAC shall respond to pause frames containing
either the reserved multicast address or the unique physical address
associated with this station.

Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 0adcf73..371a669 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -201,7 +201,10 @@ static void dwmac1000_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
unsigned int fc, unsigned int pause_time)
{
void __iomem *ioaddr = hw->pcsr;
- unsigned int flow = 0;
+ /* Set flow such that DZPQ in Mac Register 6 is 0,
+ * and unicast pause detect is enabled.
+ */
+ unsigned int flow = GMAC_FLOW_CTRL_UP;

pr_debug("GMAC Flow-Control:\n");
if (fc & FLOW_RX) {
--
1.9.1


\
 
 \ /
  Last update: 2015-04-15 23:21    [W:0.100 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site