[lkml]   [2015]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: AM335x OMAP2 common clock external fixed-clock registration
On 04/15/2015 05:09 PM, Michael Welling wrote:
> On Wed, Apr 15, 2015 at 09:34:48AM +0300, Tero Kristo wrote:
>> On 04/15/2015 12:17 AM, Michael Welling wrote:
>>> Greetings,
>>> I have developed an AM3354 based SoM and it uses an external SI5351 clock
>>> generator to drive the clock inputs for an external duart and I2S audio
>>> master clock. With the registration according to the documentation the
>>> reference clock is not being detected and hence the clock generator is
>>> not working as expect.
>>> After trying many different things, I started to look around the mailing
>>> lists to find information related to this issue.
>>> I came acrossed post that has the exact same issue:
>>> Seeing as the patch did not land upstream, I am wondering if there is
>>> a solution that I am not seeing.
>>> I am willing to provide a patch given appropriate guidance.
>> Hi Michael,
>> The info on the email you referenced is kind of obsolete, TI SoCs
>> are calling of_clk_init() during boot now, and thus external clock
>> nodes should be registered fine also. Maybe you can provide the
>> actual DTS patch you are trying out so we can help better...? Are
> See attached patch and console output.

I see a bug in your dt data.


+ clocks {
+ ref27: ref27 {
+ #clock-cells = <0>;
+ compatibale = "fixed-clock";

This should be compatible, right? DT is annoying in that it doesn't
verify property names.

+ clock-frequency = <27000000>;
+ };
+ };


>> you seeing any boot time error / warning prints for your new clock?
> With the debug messages on you see that the reference clock is not being
> detected.
> Whilest debugging I found that the of_clk_get is returning an error no matter
> which clock I pass it:
>> -Tero

 \ /
  Last update: 2015-04-15 21:21    [W:0.080 / U:1.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site