lkml.org 
[lkml]   [2015]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 1/4] drm/layerscape: Add Freescale DCU DRM driver
Date
Hi Stefan,

> -----Original Message-----
> From: Stefan Agner [mailto:stefan@agner.ch]
> Sent: Wednesday, April 08, 2015 3:57 PM
> To: Wang Jianwei-B52261
> Cc: Wood Scott-B07421; airlied@linux.ie; dri-devel@lists.freedesktop.org;
> devicetree@vger.kernel.org; Xiubo Li; Wang Huan-B18965; linux-
> kernel@vger.kernel.org; Jin Zhengxiong-R64188; linux-arm-
> kernel@lists.infradead.org
> Subject: RE: [PATCH v3 1/4] drm/layerscape: Add Freescale DCU DRM driver
>
> On 2015-04-08 09:17, Jianwei.Wang@freescale.com wrote:
> > Hi Stefan,
> >
> >> -----Original Message-----
> >> From: Stefan Agner [mailto:stefan@agner.ch]
> >> Sent: Tuesday, April 07, 2015 8:12 PM
> >> To: Wang Jianwei-B52261
> >> Cc: Wood Scott-B07421; airlied@linux.ie; dri-
> devel@lists.freedesktop.org;
> >> devicetree@vger.kernel.org; Xiubo Li; Wang Huan-B18965; linux-
> >> kernel@vger.kernel.org; Jin Zhengxiong-R64188; linux-arm-
> >> kernel@lists.infradead.org
> >> Subject: RE: [PATCH v3 1/4] drm/layerscape: Add Freescale DCU DRM
> driver
> >>
> >> Hi Jianwei,
> >>
> >> On 2015-04-07 08:44, Jianwei.Wang@freescale.com wrote:
> >> > Hi Stefan,
> >> >
> >> > Thank you for your review and testing on Vybrid F610 device. This
> driver
> >> > just implement the basic functions and it only support the exported
> >> > framebuffer access. Some DRM interfaces are not implemented now. So
> your
> >> > test result is normal. I will implement these interfaces with patches
> >> soon
> >> > afterwards. I don't plan to add new features for the initial version
> >> driver,
> >> > otherwise it will be a long term for this version.
> >> >
> >> > I tested on ls1021a using TFT panel, there are no flickers on the
> screen
> >> > when inserting a USB HID device. I will do more test if time permits.
> >> >
> >> > By the way, could please give me some guidance on how X-Server use
> DRM
> >> > Interface directly? Do you have some papers or webpage about this?
> >>
> >> I'm using the modesetting X.org driver. Lots of distributions ship that
> >> driver as a package (e.g. xserver-xorg-video-modesetting in Debian, or
> >> xf86-video-modesetting in OpenEmbedded). Since 1.17 this driver has
> even
> >> been included into the main source tree of Xorg X-Server
> >>
> (http://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/drivers/modesett
> >> ing)
> >>
> >> This driver is using KMS/DRM interface and should work well for
> >> un-accelerated graphic devices. This is a a much nicer way to use X.org
> >> on top of a DRM driver, since it avoids going through the legacy fbdev
> >> interface. The man page shows how to use it:
> >> http://linux.die.net/man/4/modesetting
> >>
> >> So, when the driver is installed, it is just choosing that driver in
> >> xorg.conf:
> >>
> >> Section "Device"
> >> Identifier "dcu"
> >> Driver "modesetting"
> >> EndSection
> >>
> >
> > Thank you for your guidance.
> >
> >> Some more comments below...
> >>
> >> >
> >> > My reply below...
> >> >
> >> >>
> >> >> Hi Jianwei,
> >> >>
> >> >> The driver worked on a Vybrid VF610 device using the exported
> >> >> framebuffer. However, when using X-Server through the DRM interface
> >> >> directly (by using the modesetting driver) I get just a black screen
> so
> >> >> far, still investigating the reason. What user-space interfaces did
> you
> >> >> test?
> >> >>
> >> >> When using the FB device and insert a USB HID device, I get some
> >> >> flickers on the screen. I didn't had those on the dcufb driver, did
> you
> >> >> notice something like this too? Probably related to the resolution,
> I'm
> >> >> using VGA resolution.
> >> >>
> >> >> Some comments below.
> >> >>
> >> >>
> >> >> On 2015-03-26 06:37, Jianwei Wang wrote:
> >> >> > This patch add support for Two Dimensional Animation and
> Compositing
> >> >> > Engine (2D-ACE) on the Freescale SoCs.
> >> >> >
> >> >> > 2D-ACE is a Freescale display controller. 2D-ACE describes
> >> >> > the functionality of the module extremely well its name is a value
> >> >> > that cannot be used as a token in programming languages.
> >> >> > Instead the valid token "DCU" is used to tag the register names
> and
> >> >> > function names.
> >> >> >
> >> >> > The Display Controller Unit (DCU) module is a system master that
> >> >> > fetches graphics stored in internal or external memory and
> displays
> >> >> > them on a TFT LCD panel. A wide range of panel sizes is supported
> >> >> > and the timing of the interface signals is highly configurable.
> >> >> > Graphics are read directly from memory and then blended in real-
> time,
> >> >> > which allows for dynamic content creation with minimal CPU
> >> >> > intervention.
> >> >> >
> >> >> > The features:
> >> >> > (1) Full RGB888 output to TFT LCD panel.
> >> >> > (2) For the current LCD panel, WQVGA "480x272" is supported.
> >> >> > (3) Blending of each pixel using up to 4 source layers
> >> >> > dependent on size of panel.
> >> >>
> >> >> modetest only shows one layer currently...
> >> >
> >> > Yes, only one plane and one framebuffer were created now, others
> >> > maybe create as user requirement or create all when initializing,
> >> > I'm not sure now. This describe the hardware feature
> >> >
> >> >>
> >> >> > (4) Each graphic layer can be placed with one pixel resolution
> >> >> > in either axis.
> >> >> > (5) Each graphic layer support RGB565 and RGB888 direct colors
> >> >> > without alpha channel
> >> >> > and BGRA8888 direct colors with an alpha channel.
> >> >>
> >> >> The array fsl_dcu_drm_plane_formats below shows more formats, does
> this
> >> >> commit log needs updating?
> >> >>
> >> >
> >> > I agree with your suggestion, I will update this commit log
> >> >
> >> >> > (6) Each graphic layer support alpha blending with 8-bit
> >> >> > resolution.
> >> >> >
> >> >> > This is a simplified version, only one primary plane, one
> >> >> > framebuffer created for fbdev, one crtc, one connector for
> >> >> > TFT LCD panel, an encoder.
> >> >> >
> >> >> > Signed-off-by: Alison Wang <b18965@freescale.com>
> >> >> > Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> >> >> > Signed-off-by: Jianwei Wang <b52261@freescale.com>
> >> >> > ---
> >> >> >
> >> >> > Changed in V3:
> >> >> >
> >> >> > - Test driver on Vybrid board and add compatible string
> >> >> > - Remove unused functions
> >> >> > - set default crtc for encoder
> >> >> > - replace legacy functions with atomic help functions
> >> >> > - Set the unique name of the DRM device
> >> >> > - Implement irq handle function for vblank interrupt
> >> >> >
> >> >> > Changed in v2:
> >> >> > - Add atomic support
> >> >> > - Modify bindings file
> >> >> > - Rename node for compatibility
> >> >> > - Move platform related code out for compatibility
> >> >> >
> >> >> > .../devicetree/bindings/drm/fsl/fsl,dcu.txt | 50 ++++
> >> >> > drivers/gpu/drm/Kconfig | 2 +
> >> >> > drivers/gpu/drm/Makefile | 1 +
> >> >> > drivers/gpu/drm/fsl/Kconfig | 17 ++
> >> >> > drivers/gpu/drm/fsl/Makefile | 8 +
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c | 193
> >> ++++++++++++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h | 30 ++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c | 165
> ++++++++++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h | 26 ++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c | 331
> >> >> +++++++++++++++++++++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h | 210
> >> +++++++++++++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c | 26 ++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c | 42 +++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h | 17 ++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c | 192
> >> ++++++++++++
> >> >> > drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h | 23 ++
> >> >> > 16 files changed, 1333 insertions(+)
> >> >> > create mode 100644
> >> >> Documentation/devicetree/bindings/drm/fsl/fsl,dcu.txt
> >> >> > create mode 100644 drivers/gpu/drm/fsl/Kconfig
> >> >> > create mode 100644 drivers/gpu/drm/fsl/Makefile
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> >> >> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> >> >> >
> >> >> > diff --git a/Documentation/devicetree/bindings/drm/fsl/fsl,dcu.txt
> >> >> > b/Documentation/devicetree/bindings/drm/fsl/fsl,dcu.txt
> >> >> > new file mode 100644
> >> >> > index 0000000..bdc7d5b
> >> >> > --- /dev/null
> >> >> > +++ b/Documentation/devicetree/bindings/drm/fsl/fsl,dcu.txt
> >> >> > @@ -0,0 +1,50 @@
> >> >> > +Device Tree bindings for Freescale DCU DRM Driver
> >> >> > +
> >> >> > +Required properties:
> >> >> > +- compatible: Should be one of
> >> >> > + * "fsl,ls1021a-dcu".
> >> >> > + * "fsl,vf610-dcu".
> >> >>
> >> >> In the Vybrid reference manual, that IP is denoted as "DCU4". Any
> >> reason
> >> >> why you left out the DCU version? Is this different for LS1021a? On
> the
> >> >> other hand, with the SoC in the name, the IP should be specified
> clear
> >> >> enough.
> >> >>
> >> >
> >> > In the LS1021A reference manual, no DCU version related words. I
> asked
> >> > previous DCU owner, she told me that LS1021A use DCU5 and she also
> point
> >> > out that the same DCU version there may be differences between
> different
> >> > SoCs. So I named compatible string with SoC name.
> >>
> >> Ok, I'm fine with that, thx for the background information.
> >>
> >> >
> >> >> > +- reg: Address and length of the register set
> for
> >> dcu.
> >> >> > +- clocks: From common clock binding: handle to dcu
> >> clock.
> >> >> > +- clock-names: From common clock binding: Shall be "dcu".
> >> >> > +- display: The phandle to display node.
> >> >> > +
> >> >> > +Required properties:
> >> >> > +- bits-per-pixel: <16> for RGB565,
> >> >> > + <24> for RGB888,
> >> >> > + <32> for RGB8888.
> >> >> > +
> >> >> > +Required timing node for dispplay sub-node:
> >> >> > +- display-timings: Refer to binding doc display-timing.txt
> for
> >> >> details.
> >> >> > +
> >> >> > +Examples:
> >> >> > +dcu: dcu@2ce0000 {
> >> >> > + compatible = "fsl,ls1021a-dcu";
> >> >> > + reg = <0x0 0x2ce0000 0x0 0x10000>;
> >> >> > + clocks = <&platform_clk 0>;
> >> >> > + clock-names = "dcu";
> >> >> > + big-endian;
> >> >> > + display = <&display>;
> >> >> > +
> >> >> > + display: display@0 {
> >> >> > + bits-per-pixel = <24>;
> >> >> > +
> >> >> > + display-timings {
> >> >> > + native-mode = <&timing0>;
> >> >> > + timing0: nl4827hc19 {
> >> >> > + clock-frequency = <10870000>;
> >> >> > + hactive = <480>;
> >> >> > + vactive = <272>;
> >> >> > + hback-porch = <2>;
> >> >> > + hfront-porch = <2>;
> >> >> > + vback-porch = <1>;
> >> >> > + vfront-porch = <1>;
> >> >> > + hsync-len = <41>;
> >> >> > + vsync-len = <2>;
> >> >> > + hsync-active = <1>;
> >> >> > + vsync-active = <1>;
> >> >> > + };
> >> >> > + };
> >> >> > + };
> >> >> > +};
> >> >> > +
> >> >> > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> >> >> > index 151a050..a6957aa 100644
> >> >> > --- a/drivers/gpu/drm/Kconfig
> >> >> > +++ b/drivers/gpu/drm/Kconfig
> >> >> > @@ -199,6 +199,8 @@ source "drivers/gpu/drm/bochs/Kconfig"
> >> >> >
> >> >> > source "drivers/gpu/drm/msm/Kconfig"
> >> >> >
> >> >> > +source "drivers/gpu/drm/fsl/Kconfig"
> >> >> > +
> >> >> > source "drivers/gpu/drm/tegra/Kconfig"
> >> >> >
> >> >> > source "drivers/gpu/drm/panel/Kconfig"
> >> >> > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> >> >> > index 2c239b9..ab5b9ef 100644
> >> >> > --- a/drivers/gpu/drm/Makefile
> >> >> > +++ b/drivers/gpu/drm/Makefile
> >> >> > @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_UDL) += udl/
> >> >> > obj-$(CONFIG_DRM_AST) += ast/
> >> >> > obj-$(CONFIG_DRM_ARMADA) += armada/
> >> >> > obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
> >> >> > +obj-$(CONFIG_DRM_FSL_DCU) += fsl/
> >> >>
> >> >> Hm, I'm wondering whether it would be a good idea to store that
> driver
> >> >> under fsl-dcu/... Any opinion?
> >> >>
> >> >
> >> > I think it is good advice, I'll think about this
> >> >
> >> >> > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
> >> >> > obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
> >> >> > obj-$(CONFIG_DRM_OMAP) += omapdrm/
> >> >> > diff --git a/drivers/gpu/drm/fsl/Kconfig
> >> b/drivers/gpu/drm/fsl/Kconfig
> >> >> > new file mode 100644
> >> >> > index 0000000..e4f8df0
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/Kconfig
> >> >> > @@ -0,0 +1,17 @@
> >> >> > +config DRM_FSL_DCU
> >> >> > + tristate "DRM Support for Freescale DCU"
> >> >> > + depends on DRM && OF && ARM
> >> >> > + select DRM_KMS_HELPER
> >> >> > + select DRM_KMS_CMA_HELPER
> >> >> > + select VIDEOMODE_HELPERS
> >> >> > + select BACKLIGHT_CLASS_DEVICE
> >> >> > + select BACKLIGHT_LCD_SUPPORT
> >> >> > + select REGMAP_MMIO
> >> >> > + select DRM_KMS_FB_HELPER
> >> >> > + select FB_SYS_FILLRECT
> >> >> > + select FB_SYS_COPYAREA
> >> >> > + select FB_SYS_IMAGEBLIT
> >> >> > + select FB_SYS_FOPS
> >> >> > + help
> >> >> > + Choose this option if you have an Freescale DCU chipset.
> >> >> > + If M is selected the module will be called fsl-dcu-drm.
> >> >> > diff --git a/drivers/gpu/drm/fsl/Makefile
> >> b/drivers/gpu/drm/fsl/Makefile
> >> >> > new file mode 100644
> >> >> > index 0000000..5f74aee
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/Makefile
> >> >> > @@ -0,0 +1,8 @@
> >> >> > +fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
> >> >> > + fsl_dcu_drm_kms.o \
> >> >> > + fsl_dcu_drm_connector.o \
> >> >> > + fsl_dcu_drm_plane.o \
> >> >> > + fsl_dcu_drm_crtc.o \
> >> >> > + fsl_dcu_drm_fbdev.o \
> >> >> > +
> >> >> > +obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu-drm.o
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> >> >> > new file mode 100644
> >> >> > index 0000000..4610647
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> >> >> > @@ -0,0 +1,193 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#include <linux/backlight.h>
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_atomic_helper.h>
> >> >> > +#include <video/of_display_timing.h>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_drv.h"
> >> >> > +#include "fsl_dcu_drm_connector.h"
> >> >> > +
> >> >> > +static void fsl_dcu_drm_encoder_dpms(struct drm_encoder *encoder,
> >> int
> >> >> mode)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_encoder_mode_prepare(struct drm_encoder
> >> >> *encoder)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_encoder_mode_set(struct drm_encoder
> *encoder,
> >> >> > + struct drm_display_mode *mode,
> >> >> > + struct drm_display_mode
> >> *adjusted_mode)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_encoder_mode_commit(struct drm_encoder
> >> *encoder)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_encoder_disable(struct drm_encoder
> *encoder)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static int
> >> >> > +fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
> >> >> > + struct drm_crtc_state *crtc_state,
> >> >> > + struct drm_connector_state *conn_state)
> >> >> > +{
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_encoder_destroy(struct drm_encoder
> *encoder)
> >> >> > +{
> >> >> > + drm_encoder_cleanup(encoder);
> >> >> > +}
> >> >> > +
> >> >> > +static const struct drm_encoder_helper_funcs encoder_helper_funcs
> =
> >> {
> >> >> > + .dpms = fsl_dcu_drm_encoder_dpms,
> >> >> > + .prepare = fsl_dcu_drm_encoder_mode_prepare,
> >> >> > + .commit = fsl_dcu_drm_encoder_mode_commit,
> >> >> > + .mode_set = fsl_dcu_drm_encoder_mode_set,
> >> >> > + .disable = fsl_dcu_drm_encoder_disable,
> >> >> > + .atomic_check = fsl_dcu_drm_encoder_atomic_check,
> >> >> > +};
> >> >> > +
> >> >> > +static const struct drm_encoder_funcs encoder_funcs = {
> >> >> > + .destroy = fsl_dcu_drm_encoder_destroy,
> >> >> > +};
> >> >> > +
> >> >> > +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
> >> >> > + struct fsl_dcu_drm_crtc *crtc)
> >> >> > +{
> >> >> > + struct drm_encoder *encoder = &fsl_dev->encoder;
> >> >> > + int ret;
> >> >> > +
> >> >> > + ret = drm_encoder_init(fsl_dev->ddev, encoder, &encoder_funcs,
> >> >> > + DRM_MODE_ENCODER_LVDS);
> >> >> > + if (ret < 0)
> >> >> > + return ret;
> >> >> > +
> >> >> > + drm_encoder_helper_add(encoder, &encoder_helper_funcs);
> >> >> > + encoder->crtc = &crtc->crtc;
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +#define to_fsl_dcu_connector(connector) \
> >> >> > + container_of(connector, struct fsl_dcu_drm_connector,
> >> connector)
> >> >> > +
> >> >> > +static int fsl_dcu_drm_connector_get_modes(struct drm_connector
> >> >> *connector)
> >> >> > +{
> >> >> > + struct drm_device *dev = connector->dev;
> >> >> > + struct device_node *display_np, *np = dev->dev->of_node;
> >> >> > + struct drm_display_mode *mode = drm_mode_create(connector-
> >> >dev);
> >> >> > + int num_modes = 0;
> >> >> > +
> >> >> > + if (np) {
> >> >> > + display_np = of_parse_phandle(np, "display", 0);
> >> >> > + if (!display_np) {
> >> >> > + dev_err(dev->dev, "failed to find display
> >> phandle\n");
> >> >> > + return num_modes;
> >> >> > + }
> >> >> > + of_get_drm_display_mode(display_np, mode,
> >> OF_USE_NATIVE_MODE);
> >> >> > + mode->type |= DRM_MODE_TYPE_DRIVER |
> >> DRM_MODE_TYPE_PREFERRED,
> >> >> > + drm_mode_probed_add(connector, mode);
> >> >> > + num_modes++;
> >> >> > + }
> >> >> > +
> >> >> > + return num_modes;
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_connector_mode_valid(struct drm_connector
> >> >> *connector,
> >> >> > + struct drm_display_mode *mode)
> >> >> > +{
> >> >> > + return MODE_OK;
> >> >> > +}
> >> >> > +
> >> >> > +static struct drm_encoder *
> >> >> > +fsl_dcu_drm_connector_best_encoder(struct drm_connector
> *connector)
> >> >> > +{
> >> >> > + struct fsl_dcu_drm_connector *fsl_con =
> >> >> to_fsl_dcu_connector(connector);
> >> >> > +
> >> >> > + return fsl_con->encoder;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_connector_destroy(struct drm_connector
> >> >> *connector)
> >> >> > +{
> >> >> > + drm_connector_unregister(connector);
> >> >> > + drm_connector_cleanup(connector);
> >> >> > +}
> >> >> > +
> >> >> > +static enum drm_connector_status
> >> >> > +fsl_dcu_drm_connector_detect(struct drm_connector *connector,
> bool
> >> >> force)
> >> >> > +{
> >> >> > + return connector_status_connected;
> >> >> > +}
> >> >> > +
> >> >> > +static const struct drm_connector_funcs
> fsl_dcu_drm_connector_funcs
> >> = {
> >> >> > + .dpms = drm_atomic_helper_connector_dpms,
> >> >> > + .reset = drm_atomic_helper_connector_reset,
> >> >> > + .detect = fsl_dcu_drm_connector_detect,
> >> >> > + .fill_modes = drm_helper_probe_single_connector_modes,
> >> >> > + .destroy = fsl_dcu_drm_connector_destroy,
> >> >> > + .atomic_duplicate_state =
> >> >> drm_atomic_helper_connector_duplicate_state,
> >> >> > + .atomic_destroy_state =
> >> drm_atomic_helper_connector_destroy_state,
> >> >> > +};
> >> >> > +
> >> >> > +static const struct drm_connector_helper_funcs
> >> connector_helper_funcs =
> >> >> {
> >> >> > + .get_modes = fsl_dcu_drm_connector_get_modes,
> >> >> > + .mode_valid = fsl_dcu_drm_connector_mode_valid,
> >> >> > + .best_encoder = fsl_dcu_drm_connector_best_encoder,
> >> >> > +};
> >> >> > +
> >> >> > +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device
> *fsl_dev,
> >> >> > + struct drm_encoder *encoder)
> >> >> > +{
> >> >> > + struct drm_connector *connector = &fsl_dev-
> >> >connector.connector;
> >> >> > + int ret;
> >> >> > +
> >> >> > + fsl_dev->connector.encoder = encoder;
> >> >> > +
> >> >> > + connector->display_info.width_mm = 0;
> >> >> > + connector->display_info.height_mm = 0;
> >> >> > +
> >> >> > + ret = drm_connector_init(fsl_dev->ddev, connector,
> >> >> > + &fsl_dcu_drm_connector_funcs,
> >> >> > + DRM_MODE_CONNECTOR_LVDS);
> >> >> > + if (ret < 0)
> >> >> > + return ret;
> >> >> > +
> >> >> > + connector->dpms = DRM_MODE_DPMS_OFF;
> >> >> > + drm_connector_helper_add(connector, &connector_helper_funcs);
> >> >> > + ret = drm_connector_register(connector);
> >> >> > + if (ret < 0)
> >> >> > + goto err_cleanup;
> >> >> > +
> >> >> > + ret = drm_mode_connector_attach_encoder(connector, encoder);
> >> >> > + if (ret < 0)
> >> >> > + goto err_sysfs;
> >> >> > +
> >> >> > + connector->encoder = encoder;
> >> >> > +
> >> >> > + drm_object_property_set_value
> >> >> > + (&connector->base, fsl_dev->ddev-
> >> >mode_config.dpms_property,
> >> >> > + DRM_MODE_DPMS_OFF);
> >> >> > +
> >> >> > + return 0;
> >> >> > +
> >> >> > +err_sysfs:
> >> >> > + drm_connector_unregister(connector);
> >> >> > +err_cleanup:
> >> >> > + drm_connector_cleanup(connector);
> >> >> > + return ret;
> >> >> > +}
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> >> >> > new file mode 100644
> >> >> > index 0000000..bbf6d38
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> >> >> > @@ -0,0 +1,30 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#ifndef __FSL_DCU_DRM_CONNECTOR_H__
> >> >> > +#define __FSL_DCU_DRM_CONNECTOR_H__
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_crtc.h>
> >> >> > +#include "fsl_dcu_drm_crtc.h"
> >> >> > +
> >> >> > +struct fsl_dcu_drm_device;
> >> >> > +struct fsl_dcu_drm_connector {
> >> >> > + struct drm_connector connector;
> >> >> > + struct drm_encoder *encoder;
> >> >> > +};
> >> >> > +
> >> >> > +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
> >> >> > + struct fsl_dcu_drm_crtc *crtc);
> >> >> > +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device
> *fsl_dev,
> >> >> > + struct drm_encoder *encoder);
> >> >> > +
> >> >> > +#endif /* __FSL_DCU_DRM_CONNECTOR_H__ */
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> >> >> > new file mode 100644
> >> >> > index 0000000..076e273
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> >> >> > @@ -0,0 +1,165 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#include <linux/regmap.h>
> >> >> > +#include <linux/clk.h>
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_atomic.h>
> >> >> > +#include <drm/drm_atomic_helper.h>
> >> >> > +#include <drm/drm_crtc.h>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_crtc.h"
> >> >> > +#include "fsl_dcu_drm_drv.h"
> >> >> > +#include "fsl_dcu_drm_plane.h"
> >> >> > +
> >> >> > +#define to_fsl_dcu_crtc(c) container_of(c, struct
> >> fsl_dcu_drm_crtc,
> >> >> crtc)
> >> >> > +
> >> >> > +void fsl_dcu_drm_crtc_suspend(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > + struct drm_device *dev = crtc->dev;
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> >> >> > + struct drm_display_mode *mode = &crtc->state->mode;
> >> >> > + uint32_t hbp, hfp, hsw, vbp, vfp, vsw, div, index;
> >> >> > +
> >> >> > + DBG(": set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x
> >> 0x%x",
> >> >> > + mode->base.id, mode->name,
> >> >> > + mode->vrefresh, mode->clock,
> >> >> > + mode->hdisplay, mode->hsync_start,
> >> >> > + mode->hsync_end, mode->htotal,
> >> >> > + mode->vdisplay, mode->vsync_start,
> >> >> > + mode->vsync_end, mode->vtotal,
> >> >> > + mode->type, mode->flags);
> >> >> > +
> >> >> > + index = drm_crtc_index(crtc);
> >> >> > + div = (uint32_t)clk_get_rate(fsl_dev->clk) / mode->clock /
> >> 1000;
> >> >> > +
> >> >> > + /* Configure timings: */
> >> >> > + hbp = mode->htotal - mode->hsync_end;
> >> >> > + hfp = mode->hsync_start - mode->hdisplay;
> >> >> > + hsw = mode->hsync_end - mode->hsync_start;
> >> >> > + vbp = mode->vtotal - mode->vsync_end;
> >> >> > + vfp = mode->vsync_start - mode->vdisplay;
> >> >> > + vsw = mode->vsync_end - mode->vsync_start;
> >> >> > +
> >> >> > + regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
> >> >> > + DCU_HSYN_PARA_BP(hbp) |
> >> >> > + DCU_HSYN_PARA_PW(hsw) |
> >> >> > + DCU_HSYN_PARA_FP(hfp));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
> >> >> > + DCU_VSYN_PARA_BP(vbp) |
> >> >> > + DCU_VSYN_PARA_PW(vsw) |
> >> >> > + DCU_VSYN_PARA_FP(vfp));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
> >> >> > + DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
> >> >> > + DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> >> >> DCU_UPDATE_MODE_READREG);
> >> >> > +}
> >> >> > +
> >> >> > +static bool fsl_dcu_drm_crtc_mode_fixup(struct drm_crtc *crtc,
> >> >> > + const struct drm_display_mode *mode,
> >> >> > + struct drm_display_mode *adjusted_mode)
> >> >> > +{
> >> >> > + return true;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_crtc_prepare(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +/* Now enable the clocks, plane, pipe, and connectors that we set
> up.
> >> >> */
> >> >> > +static void fsl_dcu_drm_crtc_mode_commit(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc,
> >> >> > + struct drm_crtc_state *state)
> >> >> > +{
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
> >> >> > + .page_flip = drm_atomic_helper_page_flip,
> >> >> > + .set_config = drm_atomic_helper_set_config,
> >> >> > + .destroy = drm_crtc_cleanup,
> >> >> > + .reset = drm_atomic_helper_crtc_reset,
> >> >> > + .atomic_duplicate_state =
> >> drm_atomic_helper_crtc_duplicate_state,
> >> >> > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> >> >> > +};
> >> >> > +
> >> >> > +static void fsl_dcu_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static const struct drm_crtc_helper_funcs
> >> fsl_dcu_drm_crtc_helper_funcs
> >> >> = {
> >> >> > + .disable = fsl_dcu_drm_disable_crtc,
> >> >> > + .mode_fixup = fsl_dcu_drm_crtc_mode_fixup,
> >> >> > + .mode_set = drm_helper_crtc_mode_set,
> >> >> > + .mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb,
> >> >> > + .mode_set_base = drm_helper_crtc_mode_set_base,
> >> >> > + .prepare = fsl_dcu_drm_crtc_prepare,
> >> >> > + .commit = fsl_dcu_drm_crtc_mode_commit,
> >> >> > + .atomic_check = fsl_dcu_drm_crtc_atomic_check,
> >> >> > + .atomic_begin = fsl_dcu_drm_crtc_atomic_begin,
> >> >> > + .atomic_flush = fsl_dcu_drm_crtc_atomic_flush,
> >> >> > + .dpms = fsl_dcu_drm_crtc_dpms,
> >> >> > +};
> >> >> > +
> >> >> > +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
> >> >> > +{
> >> >> > + struct drm_plane *primary;
> >> >> > + struct drm_crtc *crtc = &fsl_dev->crtc.crtc;
> >> >> > + int ret;
> >> >> > +
> >>
> >>
> >> I hit an issue on some Vybrid devices because the planes have not been
> >> properly initialized. It seems that initialization of planes is
> required
> >> for Vybrid, something like this was also part of the DCU fbdev driver
> >> submitted by Alison Wang:
> >>
> >> +#define DCU_TOTAL_LAYER_NUM 64
> >> int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
> >> {
> >> struct drm_plane *primary;
> >> struct drm_crtc *crtc = &fsl_dev->crtc.crtc;
> >> int ret;
> >> + int i;
> >> +
> >> + for (i = 1; i < DCU_TOTAL_LAYER_NUM; i++) {
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_7(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(i), 0);
> >> + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(i), 0);
> >> + }
> >> + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> >> DCU_UPDATE_MODE_READREG);
> >>
> >> fsl_dev->crtc.dpms = DRM_MODE_DPMS_OFF;
> >>
> >>
> >> Not sure if this is required for ls1021a too...
> >>
> >
> > I have tested that there is no influence on ls1021a whether doing this
> > initialization.
> > If it is a mast for Vybrid device, I will add layers initialization.
>
> Thanks for including this, really appreciated.
>
> There is nothing specified in the RM, but I found this Technical
> Overview slide deck:
> http://www.freescale.com/files/training/doc/dwf/DWF13_AMF_IND_T0847.pdf
>
> Slide 58 states that the layers are not initialized. Also, the fb driver
> did the same, and the Kernel crashes on some hardware without this
> initialization, hence I guess for Vybrid its really required.
>
> If it is not needed for LS1021a, you could also make it conditional for
> the Vybrid compatibility string.
>
> >
> >>
> >> >> > + fsl_dev->crtc.dpms = DRM_MODE_DPMS_OFF;
> >> >> > +
> >> >> > + primary = fsl_dcu_drm_primary_create_plane(fsl_dev->ddev);
> >> >> > + ret = drm_crtc_init_with_planes(fsl_dev->ddev, crtc, primary,
> >> NULL,
> >> >> > + &fsl_dcu_drm_crtc_funcs);
> >> >> > + if (ret < 0)
> >> >> > + return ret;
> >> >> > +
> >> >> > + drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
> >> >> > +
> >> >> > + regmap_write(fsl_dev->regmap, DCU_SYN_POL,
> >> >> > + DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
> >> >> > + DCU_BGND_G(0) | DCU_BGND_B(0));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
> >> >> > + DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
> >> >> > + DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
> >> >> > + DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
> >> >> > + DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
> >> >> > + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> >> >> > + DCU_MODE_DCU_MODE_MASK,
> >> >> > + DCU_MODE_DCU_MODE(DCU_MODE_OFF));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> >> >> DCU_UPDATE_MODE_READREG);
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> >> >> > new file mode 100644
> >> >> > index 0000000..d44b564
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> >> >> > @@ -0,0 +1,26 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#ifndef __FSL_DCU_DRM_CRTC_H__
> >> >> > +#define __FSL_DCU_DRM_CRTC_H__
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_crtc.h>
> >> >> > +
> >> >> > +struct fsl_dcu_drm_device;
> >> >> > +struct fsl_dcu_drm_crtc {
> >> >> > + struct drm_crtc crtc;
> >> >> > + int dpms;
> >> >> > +};
> >> >> > +
> >> >> > +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev);
> >> >> > +
> >> >> > +#endif /* __FSL_DCU_DRM_CRTC_H__ */
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> >> >> > new file mode 100644
> >> >> > index 0000000..d4a559a
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> >> >> > @@ -0,0 +1,331 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#include <linux/clk.h>
> >> >> > +#include <linux/io.h>
> >> >> > +#include <linux/mm.h>
> >> >> > +#include <linux/module.h>
> >> >> > +#include <linux/of_platform.h>
> >> >> > +#include <linux/platform_device.h>
> >> >> > +#include <linux/pm.h>
> >> >> > +#include <linux/pm_runtime.h>
> >> >> > +#include <linux/regmap.h>
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <linux/fsl/dcu.h>
> >> >>
> >> >> This file seems to be missing in that patch.
> >> >>
> >> >
> >> > This file in patch 2/4, It's LS1021A platform related code.
> >> >
> >>
> >> This is not allowed in the kernel world: Each commit need to represent
> a
> >> complete change in the sense of being compileable and runnable. This is
> >> required to bisect kernel issues. Git bisect helps isolate issues by
> >> selecting random commits. If someone is using git bisect, and git
> >> happens to choose to test this exact revision, the developer will sit
> in
> >> front of a broken kernel. Whenever possible, we try to avoid that.
> >>
> >> In this case, you can easily avoid that by moving patch 2/4 in front of
> >> this patch. Then the file will be there when the driver is using it.
> >>
> >
> > I will adjust the sequence properly. Thank you again, I learn a lot from
> you.
> >
> >> However, as I already stated in v2 of the patchset, I don't think that
> >> direct calls into arch are the right solution to enable the pixel clock.
> >> To me, that looks like a clock gate which asks for the common clock
> >> framework being used, e.g. the clk-gate driver:
> >> http://lxr.free-electrons.com/source/drivers/clk/clk-gate.c
> >>
> >> The DCU clock gates in Vybrid use this driver too, see:
> >> http://lxr.free-electrons.com/source/arch/arm/mach-imx/clk-vf610.c#L317
> >>
> >> --
> >> Stefan
> >>
> >
> > Hum... I think this clock may not as you considered. This clock is pixel
> clock
> > rather than DCU module clock. Enable it means allow the clock export
> > to the pixel pin
> > from DCU module. Common clock framework isn't suitable for managing this
> clock.
>
> The common clock framework slide deck of Free Electrons explicitly
> state:
> ..."Controlling clocks is useful for:" ... "time reference: to compute a
> baud-rate or a pixel clock for
> example".
> http://elinux.org/images/b/b8/Elc2013_Clement.pdf
>
> I think the common clock framework is perfectly fine for this use case.
> You can also assign two clocks to a module, and use something like:
>
> clocks = <&platform_clk 0>, <&scfg_clk DCU0_PIXELCLOCK>;
> clock-names = "ipg", "pixclk;
>
> The IPU of i.MX6 also uses the clock framework to get the pixel clocks
> assigned:
> http://lxr.free-electrons.com/source/arch/arm/boot/dts/imx6q.dtsi#L154
>
> You probably need to introduce something like clk-ls102xa.c, and export
> the clocks available from the scfg module...
>
> --
> Stefan
>
>

I have looked into CCF recently. It indeed suit for pixel clock management.
I plan to implement it but not in the initial version. I will do this with
patches later, because I want to focus my thought on the DRM framework now.
I have to introduce files as you said when implementing pixel clock
management with CCF. This may caused several weeks discuss.

I will enable the pixel clock in the driver driectly as an expedient.

--
Jianwei

> >
> > --
> > Jianwei
> >>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_drv.h"
> >> >> > +#include "fsl_dcu_drm_kms.h"
> >> >> > +
> >> >> > +static int fsl_dcu_unload(struct drm_device *dev)
> >> >> > +{
> >> >> > + drm_mode_config_cleanup(dev);
> >> >> > + drm_vblank_cleanup(dev);
> >> >> > + drm_irq_uninstall(dev);
> >> >> > +
> >> >> > + dev->dev_private = NULL;
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static struct regmap_config fsl_dcu_regmap_config = {
> >> >> > + .reg_bits = 32,
> >> >> > + .reg_stride = 4,
> >> >> > + .val_bits = 32,
> >> >> > +};
> >> >> > +
> >> >> > +static int fsl_dcu_bypass_tcon(struct fsl_dcu_drm_device *fsl_dev,
> >> >> > + struct device_node *np)
> >> >> > +{
> >> >> > + struct device_node *tcon_np;
> >> >> > + struct platform_device *pdev;
> >> >> > + struct clk *tcon_clk;
> >> >> > + struct resource *res;
> >> >> > + void __iomem *base;
> >> >> > +
> >> >> > + tcon_np = of_parse_phandle(np, "tcon-controller", 0);
> >> >> > + if (!tcon_np)
> >> >> > + return -EINVAL;
> >> >> > +
> >> >> > + pdev = of_find_device_by_node(tcon_np);
> >> >> > + if (!pdev)
> >> >> > + return -EINVAL;
> >> >> > +
> >> >> > + tcon_clk = devm_clk_get(&pdev->dev, "tcon");
> >> >> > + if (IS_ERR(tcon_clk))
> >> >> > + return PTR_ERR(tcon_clk);
> >> >> > + clk_prepare_enable(tcon_clk);
> >> >>
> >> >> You enable the clock explicitly...
> >> >>
> >> >> > +
> >> >> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> >> > + if (!res)
> >> >> > + return -ENODEV;
> >> >> > +
> >> >> > + base = devm_ioremap_resource(&pdev->dev, res);
> >> >> > + if (IS_ERR(base))
> >> >> > + return PTR_ERR(base);
> >> >> > +
> >> >> > + fsl_dev->tcon_regmap = devm_regmap_init_mmio_clk(&pdev->dev,
> >> >> > + "tcon", base, &fsl_dcu_regmap_config);
> >> >>
> >> >> And implicitly using regmap. In a short test on Vybrid, the clock is
> >> >> actually not needed during operation, hence we could use the
> explicit
> >> >> enabling above, what do you think?
> >> >>
> >> >> Also, the clock and tcon in general currently does not get handled
> by
> >> >> suspend/resume code...
> >> >>
> >> >
> >> > OK, I'll update code here
> >> >
> >> >> > + if (IS_ERR(fsl_dev->tcon_regmap)) {
> >> >> > + dev_err(&pdev->dev, "regmap init failed\n");
> >> >> > + return PTR_ERR(fsl_dev->tcon_regmap);
> >> >> > + }
> >> >> > +
> >> >> > + regmap_write(fsl_dev->tcon_regmap, TCON_CTRL1,
> >> TCON_BYPASS_ENABLE);
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_irq_init(struct drm_device *dev)
> >> >> > +{
> >> >> > + struct platform_device *pdev = dev->platformdev;
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> >> >> > + unsigned int int_mask;
> >> >> > + int ret;
> >> >> > +
> >> >> > + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev,
> >> 0));
> >> >> > + if (ret < 0)
> >> >> > + dev_err(&pdev->dev, "failed to install IRQ handler\n");
> >> >> > +
> >> >> > + dev->irq_enabled = true;
> >> >> > + dev->vblank_disable_allowed = true;
> >> >> > +
> >> >> > + regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0);
> >> >> > + regmap_read(fsl_dev->regmap, DCU_INT_MASK, &int_mask);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_INT_MASK, int_mask &
> >> >> > + ~DCU_INT_MASK_VBLANK);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> >> >> DCU_UPDATE_MODE_READREG);
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_load(struct drm_device *dev, unsigned long
> flags)
> >> >> > +{
> >> >> > + struct platform_device *pdev = dev->platformdev;
> >> >> > + struct fsl_dcu_drm_device *fsl_dev;
> >> >> > + struct resource *res;
> >> >> > + void __iomem *base;
> >> >> > + int ret;
> >> >> > +
> >> >> > + fsl_dev = devm_kzalloc(&pdev->dev, sizeof(*fsl_dev),
> >> GFP_KERNEL);
> >> >> > + if (!fsl_dev)
> >> >> > + return -ENOMEM;
> >> >> > +
> >> >> > + fsl_dev->dev = &pdev->dev;
> >> >> > + fsl_dev->ddev = dev;
> >> >> > + fsl_dev->np = pdev->dev.of_node;
> >> >> > + dev->dev_private = fsl_dev;
> >> >> > + drm_dev_set_unique(dev, dev_name(dev->dev));
> >> >> > +
> >> >> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> >> > + if (!res) {
> >> >> > + dev_err(&pdev->dev, "could not get memory IO
> >> resource\n");
> >> >> > + return -ENODEV;
> >> >> > + }
> >> >> > +
> >> >> > + base = devm_ioremap_resource(&pdev->dev, res);
> >> >> > + if (IS_ERR(base)) {
> >> >> > + ret = PTR_ERR(base);
> >> >> > + return ret;
> >> >> > + }
> >> >> > +
> >> >> > + fsl_dev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL,
> >> >> > + base, &fsl_dcu_regmap_config);
> >> >> > + if (IS_ERR(fsl_dev->regmap)) {
> >> >> > + dev_err(&pdev->dev, "regmap init failed\n");
> >> >> > + return PTR_ERR(fsl_dev->regmap);
> >> >> > + }
> >> >> > +
> >> >> > + /* Put TCON in bypass mode, so the input signals from DCU are
> >> passed
> >> >> > + * through TCON unchanged */
> >> >> > + fsl_dcu_bypass_tcon(fsl_dev, fsl_dev->np);
> >> >> > + fsl_dev->clk = devm_clk_get(&pdev->dev, "dcu");
> >> >> > + if (IS_ERR(fsl_dev->clk)) {
> >> >> > + ret = PTR_ERR(fsl_dev->clk);
> >> >> > + dev_err(&pdev->dev, "could not get clock\n");
> >> >> > + return ret;
> >> >> > + }
> >> >> > + clk_prepare_enable(fsl_dev->clk);
> >> >> > + dev_set_drvdata(dev->dev, fsl_dev);
> >> >> > +
> >> >> > + ret = fsl_dcu_drm_modeset_init(fsl_dev);
> >> >> > + if (ret < 0) {
> >> >> > + dev_err(&pdev->dev, "failed to initialize mode
> >> setting\n");
> >> >> > + return ret;
> >> >> > + }
> >> >> > +
> >> >> > + ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> >> >> > + if (ret < 0) {
> >> >> > + dev_err(&pdev->dev, "failed to initialize vblank\n");
> >> >> > + goto done;
> >> >> > + }
> >> >> > +
> >> >> > + ret = fsl_dcu_drm_irq_init(dev);
> >> >> > + if (ret < 0)
> >> >> > + goto done;
> >> >> > +
> >> >> > + fsl_dcu_fbdev_init(dev);
> >> >> > +
> >> >> > + return 0;
> >> >> > +done:
> >> >> > + if (ret)
> >> >> > + fsl_dcu_unload(dev);
> >> >> > +
> >> >> > + return ret;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_preclose(struct drm_device *dev, struct
> >> >> drm_file *file)
> >> >> > +{
> >> >> > + ;
> >> >> > +}
> >> >> > +
> >> >> > +static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg)
> >> >> > +{
> >> >> > + struct drm_device *dev = arg;
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> >> >> > + unsigned int int_status;
> >> >> > +
> >> >> > + regmap_read(fsl_dev->regmap, DCU_INT_STATUS, &int_status);
> >> >> > + if (int_status & DCU_INT_STATUS_VBLANK)
> >> >> > + drm_handle_vblank(dev, 0);
> >> >> > +
> >> >> > + regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0xffffffff);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> >> >> DCU_UPDATE_MODE_READREG);
> >> >> > +
> >> >> > + return IRQ_HANDLED;
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_enable_vblank(struct drm_device *dev, int
> >> crtc)
> >> >> > +{
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_disable_vblank(struct drm_device *dev,
> int
> >> crtc)
> >> >> > +{
> >> >> > + ;
> >> >> > +}
> >> >> > +
> >> >> > +static const struct file_operations fsl_dcu_drm_fops = {
> >> >> > + .owner = THIS_MODULE,
> >> >> > + .open = drm_open,
> >> >> > + .release = drm_release,
> >> >> > + .unlocked_ioctl = drm_ioctl,
> >> >> > +#ifdef CONFIG_COMPAT
> >> >> > + .compat_ioctl = drm_compat_ioctl,
> >> >> > +#endif
> >> >> > + .poll = drm_poll,
> >> >> > + .read = drm_read,
> >> >> > + .llseek = no_llseek,
> >> >> > + .mmap = drm_gem_cma_mmap,
> >> >> > +};
> >> >> > +
> >> >> > +static struct drm_driver fsl_dcu_drm_driver = {
> >> >> > + .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM |
> >> DRIVER_MODESET
> >> >> > + | DRIVER_PRIME,
> >> >> > + .load = fsl_dcu_load,
> >> >> > + .unload = fsl_dcu_unload,
> >> >> > + .preclose = fsl_dcu_drm_preclose,
> >> >> > + .irq_handler = fsl_dcu_drm_irq,
> >> >> > + .get_vblank_counter = drm_vblank_count,
> >> >> > + .enable_vblank = fsl_dcu_drm_enable_vblank,
> >> >> > + .disable_vblank = fsl_dcu_drm_disable_vblank,
> >> >> > + .gem_free_object = drm_gem_cma_free_object,
> >> >> > + .gem_vm_ops = &drm_gem_cma_vm_ops,
> >> >> > + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> >> >> > + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> >> >> > + .gem_prime_import = drm_gem_prime_import,
> >> >> > + .gem_prime_export = drm_gem_prime_export,
> >> >> > + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> >> >> > + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> >> >> > + .gem_prime_vmap = drm_gem_cma_prime_vmap,
> >> >> > + .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> >> >> > + .gem_prime_mmap = drm_gem_cma_prime_mmap,
> >> >> > + .dumb_create = drm_gem_cma_dumb_create,
> >> >> > + .dumb_map_offset = drm_gem_cma_dumb_map_offset,
> >> >> > + .dumb_destroy = drm_gem_dumb_destroy,
> >> >> > + .fops = &fsl_dcu_drm_fops,
> >> >> > + .name = "fsl-dcu-drm",
> >> >> > + .desc = "Freescale DCU DRM",
> >> >> > + .date = "20150213",
> >> >> > + .major = 1,
> >> >> > + .minor = 0,
> >> >> > +};
> >> >> > +
> >> >> > +#ifdef CONFIG_PM_SLEEP
> >> >> > +static int fsl_dcu_drm_pm_suspend(struct device *dev)
> >> >> > +{
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
> >> >> > +
> >> >> > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> >> >> > + dcu_pixclk_disable();
> >> >> > +
> >> >> > + drm_kms_helper_poll_disable(fsl_dev->ddev);
> >> >> > + fsl_dcu_drm_crtc_suspend(&fsl_dev->crtc);
> >> >>
> >> >> I get
> >> >>
> >> >> drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c: In function
> >> >> 'fsl_dcu_drm_pm_suspend':
> >> >> drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c:270:2: error: implicit
> >> declaration
> >> >> of function 'fsl_dcu_drm_crtc_suspend'
> >> >> [-Werror=implicit-function-declaration]
> >> >> fsl_dcu_drm_crtc_suspend(&fsl_dev->crtc);
> >> >> ^
> >> >> drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c: In function
> >> >> 'fsl_dcu_drm_pm_resume':
> >> >> drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c:280:2: error: implicit
> >> declaration
> >> >> of function 'fsl_dcu_drm_crtc_resume'
> >> >> [-Werror=implicit-function-declaration]
> >> >> fsl_dcu_drm_crtc_resume(&fsl_dev->crtc);
> >> >> ^
> >> >>
> >> >> The function fsl_dcu_drm_crtc_suspend seems to be part of
> >> >> fsl_dcu_drm_crtc.c, but is empty. While the other is missing
> >> >> completely... Please fix/remove as appropriate.
> >> >>
> >> >
> >> > OK, I'll fix it
> >> >
> >> > Regards
> >> > Jianwei
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_pm_resume(struct device *dev)
> >> >> > +{
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
> >> >> > +
> >> >> > + drm_modeset_lock_all(fsl_dev->ddev);
> >> >> > + fsl_dcu_drm_crtc_resume(&fsl_dev->crtc);
> >> >> > + drm_modeset_unlock_all(fsl_dev->ddev);
> >> >> > + drm_kms_helper_poll_enable(fsl_dev->ddev);
> >> >> > +
> >> >> > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> >> >> > + dcu_pixclk_enable();
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > +#endif
> >> >> > +
> >> >> > +static const struct dev_pm_ops fsl_dcu_drm_pm_ops = {
> >> >> > + SET_SYSTEM_SLEEP_PM_OPS(fsl_dcu_drm_pm_suspend,
> >> >> fsl_dcu_drm_pm_resume)
> >> >> > +};
> >> >> > +
> >> >> > +static int fsl_dcu_drm_probe(struct platform_device *pdev)
> >> >> > +{
> >> >> > + return drm_platform_init(&fsl_dcu_drm_driver, pdev);
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_remove(struct platform_device *pdev)
> >> >> > +{
> >> >> > + struct fsl_dcu_drm_device *fsl_dev =
> >> platform_get_drvdata(pdev);
> >> >> > +
> >> >> > + drm_put_dev(fsl_dev->ddev);
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static const struct of_device_id fsl_dcu_of_match[] = {
> >> >> > + { .compatible = "fsl,ls1021a-dcu", },
> >> >> > + { .compatible = "fsl,vf610-dcu", },
> >> >> > + { },
> >> >> > +};
> >> >> > +MODULE_DEVICE_TABLE(of, fsl_dcu_of_match);
> >> >> > +
> >> >> > +static struct platform_driver fsl_dcu_drm_platform_driver = {
> >> >> > + .probe = fsl_dcu_drm_probe,
> >> >> > + .remove = fsl_dcu_drm_remove,
> >> >> > + .driver = {
> >> >> > + .owner = THIS_MODULE,
> >> >> > + .name = "fsl,dcu",
> >> >> > + .pm = &fsl_dcu_drm_pm_ops,
> >> >> > + .of_match_table = fsl_dcu_of_match,
> >> >> > + },
> >> >> > +};
> >> >> > +
> >> >> > +module_platform_driver(fsl_dcu_drm_platform_driver);
> >> >> > +
> >> >> > +MODULE_ALIAS("platform:fsl-dcu-drm");
> >> >> > +MODULE_DESCRIPTION("Freescale DCU DRM Driver");
> >> >> > +MODULE_LICENSE("GPL");
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> >> >> > new file mode 100644
> >> >> > index 0000000..27226109
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> >> >> > @@ -0,0 +1,210 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#ifndef __FSL_DCU_DRM_DRV_H__
> >> >> > +#define __FSL_DCU_DRM_DRV_H__
> >> >> > +
> >> >> > +#include <linux/kernel.h>
> >> >> > +#include <linux/spinlock.h>
> >> >> > +#include <stddef.h>
> >> >> > +#include <drm/drm.h>
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_fb_helper.h>
> >> >> > +#include <drm/drm_crtc_helper.h>
> >> >> > +#include <drm/drm_gem_cma_helper.h>
> >> >> > +#include <drm/drm_fb_cma_helper.h>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_crtc.h"
> >> >> > +#include "fsl_dcu_drm_plane.h"
> >> >> > +#include "fsl_dcu_drm_connector.h"
> >> >> > +#define DRIVER_NAME "fsl-dcu-drm"
> >> >> > +
> >> >> > +#define DCU_DCU_MODE 0x0010
> >> >> > +#define DCU_MODE_BLEND_ITER(x) ((x) << 20)
> >> >> > +#define DCU_MODE_RASTER_EN BIT(14)
> >> >> > +#define DCU_MODE_DCU_MODE(x) (x)
> >> >> > +#define DCU_MODE_DCU_MODE_MASK 0x03
> >> >> > +#define DCU_MODE_OFF 0
> >> >> > +#define DCU_MODE_NORMAL 1
> >> >> > +#define DCU_MODE_TEST 2
> >> >> > +#define DCU_MODE_COLORBAR 3
> >> >> > +
> >> >> > +#define DCU_BGND 0x0014
> >> >> > +#define DCU_BGND_R(x) ((x) << 16)
> >> >> > +#define DCU_BGND_G(x) ((x) << 8)
> >> >> > +#define DCU_BGND_B(x) (x)
> >> >> > +
> >> >> > +#define DCU_DISP_SIZE 0x0018
> >> >> > +#define DCU_DISP_SIZE_DELTA_Y(x) ((x) << 16)
> >> >> > +/*Regisiter value 1/16 of horizontal resolution*/
> >> >> > +#define DCU_DISP_SIZE_DELTA_X(x) ((x) >> 4)
> >> >> > +
> >> >> > +#define DCU_HSYN_PARA 0x001c
> >> >> > +#define DCU_HSYN_PARA_BP(x) ((x) << 22)
> >> >> > +#define DCU_HSYN_PARA_PW(x) ((x) << 11)
> >> >> > +#define DCU_HSYN_PARA_FP(x) (x)
> >> >> > +
> >> >> > +#define DCU_VSYN_PARA 0x0020
> >> >> > +#define DCU_VSYN_PARA_BP(x) ((x) << 22)
> >> >> > +#define DCU_VSYN_PARA_PW(x) ((x) << 11)
> >> >> > +#define DCU_VSYN_PARA_FP(x) (x)
> >> >> > +
> >> >> > +#define DCU_SYN_POL 0x0024
> >> >> > +#define DCU_SYN_POL_INV_PXCK_FALL (0 << 6)
> >> >> > +#define DCU_SYN_POL_NEG_REMAIN (0 << 5)
> >> >> > +#define DCU_SYN_POL_INV_VS_LOW BIT(1)
> >> >> > +#define DCU_SYN_POL_INV_HS_LOW BIT(0)
> >> >> > +
> >> >> > +#define DCU_THRESHOLD 0x0028
> >> >> > +#define DCU_THRESHOLD_LS_BF_VS(x) ((x) << 16)
> >> >> > +#define DCU_THRESHOLD_OUT_BUF_HIGH(x) ((x) << 8)
> >> >> > +#define DCU_THRESHOLD_OUT_BUF_LOW(x) (x)
> >> >> > +#define BF_VS_VAL 0x03
> >> >> > +#define BUF_MAX_VAL 0x78
> >> >> > +#define BUF_MIN_VAL 0x0a
> >> >> > +
> >> >> > +#define DCU_INT_STATUS 0x002C
> >> >> > +#define DCU_INT_STATUS_VSYNC BIT(0)
> >> >> > +#define DCU_INT_STATUS_UNDRUN BIT(1)
> >> >> > +#define DCU_INT_STATUS_LSBFVS BIT(2)
> >> >> > +#define DCU_INT_STATUS_VBLANK BIT(3)
> >> >> > +#define DCU_INT_STATUS_CRCREADY BIT(4)
> >> >> > +#define DCU_INT_STATUS_CRCOVERFLOW BIT(5)
> >> >> > +#define DCU_INT_STATUS_P1FIFOLO BIT(6)
> >> >> > +#define DCU_INT_STATUS_P1FIFOHI BIT(7)
> >> >> > +#define DCU_INT_STATUS_P2FIFOLO BIT(8)
> >> >> > +#define DCU_INT_STATUS_P2FIFOHI BIT(9)
> >> >> > +#define DCU_INT_STATUS_PROGEND BIT(10)
> >> >> > +#define DCU_INT_STATUS_IPMERROR BIT(11)
> >> >> > +#define DCU_INT_STATUS_LYRTRANS BIT(12)
> >> >> > +#define DCU_INT_STATUS_DMATRANS BIT(14)
> >> >> > +#define DCU_INT_STATUS_P3FIFOLO BIT(16)
> >> >> > +#define DCU_INT_STATUS_P3FIFOHI BIT(17)
> >> >> > +#define DCU_INT_STATUS_P4FIFOLO BIT(18)
> >> >> > +#define DCU_INT_STATUS_P4FIFOHI BIT(19)
> >> >> > +#define DCU_INT_STATUS_P1EMPTY BIT(26)
> >> >> > +#define DCU_INT_STATUS_P2EMPTY BIT(27)
> >> >> > +#define DCU_INT_STATUS_P3EMPTY BIT(28)
> >> >> > +#define DCU_INT_STATUS_P4EMPTY BIT(29)
> >> >> > +
> >> >> > +#define DCU_INT_MASK 0x0030
> >> >> > +#define DCU_INT_MASK_VSYNC BIT(0)
> >> >> > +#define DCU_INT_MASK_UNDRUN BIT(1)
> >> >> > +#define DCU_INT_MASK_LSBFVS BIT(2)
> >> >> > +#define DCU_INT_MASK_VBLANK BIT(3)
> >> >> > +#define DCU_INT_MASK_CRCREADY BIT(4)
> >> >> > +#define DCU_INT_MASK_CRCOVERFLOW BIT(5)
> >> >> > +#define DCU_INT_MASK_P1FIFOLO BIT(6)
> >> >> > +#define DCU_INT_MASK_P1FIFOHI BIT(7)
> >> >> > +#define DCU_INT_MASK_P2FIFOLO BIT(8)
> >> >> > +#define DCU_INT_MASK_P2FIFOHI BIT(9)
> >> >> > +#define DCU_INT_MASK_PROGEND BIT(10)
> >> >> > +#define DCU_INT_MASK_IPMERROR BIT(11)
> >> >> > +#define DCU_INT_MASK_LYRTRANS BIT(12)
> >> >> > +#define DCU_INT_MASK_DMATRANS BIT(14)
> >> >> > +#define DCU_INT_MASK_P3FIFOLO BIT(16)
> >> >> > +#define DCU_INT_MASK_P3FIFOHI BIT(17)
> >> >> > +#define DCU_INT_MASK_P4FIFOLO BIT(18)
> >> >> > +#define DCU_INT_MASK_P4FIFOHI BIT(19)
> >> >> > +#define DCU_INT_MASK_P1EMPTY BIT(26)
> >> >> > +#define DCU_INT_MASK_P2EMPTY BIT(27)
> >> >> > +#define DCU_INT_MASK_P3EMPTY BIT(28)
> >> >> > +#define DCU_INT_MASK_P4EMPTY BIT(29)
> >> >> > +
> >> >> > +#define DCU_DIV_RATIO 0x0054
> >> >> > +
> >> >> > +#define DCU_UPDATE_MODE 0x00cc
> >> >> > +#define DCU_UPDATE_MODE_MODE BIT(31)
> >> >> > +#define DCU_UPDATE_MODE_READREG BIT(30)
> >> >> > +
> >> >> > +#define DCU_DCFB_MAX 0x300
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_1(x) (0x200 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_1_HEIGHT(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_1_WIDTH(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_2(x) (0x204 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_2_POSY(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_2_POSX(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_3(x) (0x208 + (x) * 0x40)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_4(x) (0x20c + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_4_EN BIT(31)
> >> >> > +#define DCU_CTRLDESCLN_4_TILE_EN BIT(30)
> >> >> > +#define DCU_CTRLDESCLN_4_DATA_SEL_CLUT BIT(29)
> >> >> > +#define DCU_CTRLDESCLN_4_SAFETY_EN BIT(28)
> >> >> > +#define DCU_CTRLDESCLN_4_TRANS(x) ((x) << 20)
> >> >> > +#define DCU_CTRLDESCLN_4_BPP(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_4_RLE_EN BIT(15)
> >> >> > +#define DCU_CTRLDESCLN_4_LUOFFS(x) ((x) << 4)
> >> >> > +#define DCU_CTRLDESCLN_4_BB_ON BIT(2)
> >> >> > +#define DCU_CTRLDESCLN_4_AB(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_5(x) (0x210 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_5_CKMAX_R(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_5_CKMAX_G(x) ((x) << 8)
> >> >> > +#define DCU_CTRLDESCLN_5_CKMAX_B(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_6(x) (0x214 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_6_CKMIN_R(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_6_CKMIN_G(x) ((x) << 8)
> >> >> > +#define DCU_CTRLDESCLN_6_CKMIN_B(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_7(x) (0x218 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_7_TILE_VER(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_7_TILE_HOR(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_8(x) (0x21c + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_8_FG_FCOLOR(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_9(x) (0x220 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_9_BG_BCOLOR(x) (x)
> >> >> > +
> >> >> > +#define DCU_CTRLDESCLN_10(x) (0x224 + (x) * 0x40)
> >> >> > +#define DCU_CTRLDESCLN_10_POST_SKIP(x) ((x) << 16)
> >> >> > +#define DCU_CTRLDESCLN_10_PRE_SKIP(x) (x)
> >> >> > +
> >> >> > +#define FSL_DCU_RGB565 4
> >> >> > +#define FSL_DCU_RGB888 5
> >> >> > +#define FSL_DCU_ARGB8888 6
> >> >> > +#define FSL_DCU_ARGB1555 11
> >> >> > +#define FSL_DCU_ARGB4444 12
> >> >> > +#define FSL_DCU_YUV422 14
> >> >> > +
> >> >> > +#define TCON_CTRL1 0x0000
> >> >> > +#define TCON_BYPASS_ENABLE BIT(29)
> >> >> > +
> >> >> > +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
> >> >> > +
> >> >> > +struct clk;
> >> >> > +struct device;
> >> >> > +struct drm_device;
> >> >> > +
> >> >> > +struct fsl_dcu_drm_device {
> >> >> > + struct device *dev;
> >> >> > + struct device_node *np;
> >> >> > + struct regmap *regmap;
> >> >> > + struct regmap *tcon_regmap;
> >> >> > + unsigned int irq;
> >> >> > + struct clk *clk;
> >> >> > + /*protects hardware register*/
> >> >> > + spinlock_t irq_lock;
> >> >> > + struct drm_device *ddev;
> >> >> > + struct drm_fbdev_cma *fbdev;
> >> >> > + struct fsl_dcu_drm_crtc crtc;
> >> >> > + struct drm_encoder encoder;
> >> >> > + struct fsl_dcu_drm_connector connector;
> >> >> > +};
> >> >> > +
> >> >> > +void fsl_dcu_fbdev_init(struct drm_device *dev);
> >> >> > +
> >> >> > +#endif /* __FSL_DCU_DRM_DRV_H__ */
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> >> >> > new file mode 100644
> >> >> > index 0000000..f8ef0e1
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> >> >> > @@ -0,0 +1,26 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> it
> >> >> > + * under the terms of the GNU General Public License version 2 as
> >> >> published by
> >> >> > + * the Free Software Foundation.
> >> >> > + *
> >> >> > + * This program is distributed in the hope that it will be useful,
> >> but
> >> >> WITHOUT
> >> >> > + * ANY WARRANTY; without even the implied warranty of
> >> MERCHANTABILITY
> >> >> or
> >> >> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> >> >> License for
> >> >> > + * more details.
> >> >> > + *
> >> >> > + */
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_fb_cma_helper.h>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_drv.h"
> >> >> > +
> >> >> > +/* initialize fbdev helper */
> >> >> > +void fsl_dcu_fbdev_init(struct drm_device *dev)
> >> >> > +{
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
> >> >> > +
> >> >> > + fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
> >> >> > +}
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> >> >> > new file mode 100644
> >> >> > index 0000000..0de21c6
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> >> >> > @@ -0,0 +1,42 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_atomic_helper.h>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_crtc.h"
> >> >> > +#include "fsl_dcu_drm_connector.h"
> >> >> > +#include "fsl_dcu_drm_drv.h"
> >> >> > +
> >> >> > +static const struct drm_mode_config_funcs
> >> fsl_dcu_drm_mode_config_funcs
> >> >> = {
> >> >> > + .fb_create = drm_fb_cma_create,
> >> >> > + .atomic_check = drm_atomic_helper_check,
> >> >> > + .atomic_commit = drm_atomic_helper_commit,
> >> >> > +};
> >> >> > +
> >> >> > +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev)
> >> >> > +{
> >> >> > + drm_mode_config_init(fsl_dev->ddev);
> >> >> > +
> >> >> > + fsl_dev->ddev->mode_config.min_width = 0;
> >> >> > + fsl_dev->ddev->mode_config.min_height = 0;
> >> >> > + fsl_dev->ddev->mode_config.max_width = 2031;
> >> >> > + fsl_dev->ddev->mode_config.max_height = 2047;
> >> >> > + fsl_dev->ddev->mode_config.funcs =
> >> &fsl_dcu_drm_mode_config_funcs;
> >> >> > +
> >> >> > + drm_kms_helper_poll_init(fsl_dev->ddev);
> >> >> > + fsl_dcu_drm_crtc_create(fsl_dev);
> >> >> > + fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc);
> >> >> > + fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
> >> >> > + drm_mode_config_reset(fsl_dev->ddev);
> >> >> > +
> >> >> > + return 0;
> >> >> > +}
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> >> >> > new file mode 100644
> >> >> > index 0000000..b9bd299
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> >> >> > @@ -0,0 +1,17 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#ifndef __FSL_DCU_DRM_KMS_H__
> >> >> > +#define __FSL_DCU_DRM_KMS_H__
> >> >> > +
> >> >> > +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);
> >> >> > +
> >> >> > +#endif /* __FSL_DCU_DRM_KMS_H__ */
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> >> >> > new file mode 100644
> >> >> > index 0000000..6146e80
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> >> >> > @@ -0,0 +1,192 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#include <drm/drmP.h>
> >> >> > +#include <drm/drm_crtc.h>
> >> >> > +#include <drm/drm_crtc_helper.h>
> >> >> > +#include <drm/drm_fb_cma_helper.h>
> >> >> > +#include <drm/drm_gem_cma_helper.h>
> >> >> > +#include <linux/regmap.h>
> >> >> > +#include <drm/drm_plane_helper.h>
> >> >> > +#include <drm/drm_atomic_helper.h>
> >> >> > +
> >> >> > +#include "fsl_dcu_drm_drv.h"
> >> >> > +#include "fsl_dcu_drm_kms.h"
> >> >> > +#include "fsl_dcu_drm_plane.h"
> >> >> > +
> >> >> > +#define to_fsl_dcu_plane(plane) \
> >> >> > + container_of(plane, struct fsl_dcu_drm_plane, plane)
> >> >> > +
> >> >> > +static int
> >> >> > +fsl_dcu_drm_plane_prepare_fb(struct drm_plane *plane,
> >> >> > + struct drm_framebuffer *fb,
> >> >> > + const struct drm_plane_state *new_state)
> >> >> > +{
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static void
> >> >> > +fsl_dcu_drm_plane_cleanup_fb(struct drm_plane *plane,
> >> >> > + struct drm_framebuffer *fb,
> >> >> > + const struct drm_plane_state *new_state)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +static int fsl_dcu_drm_plane_atomic_check(struct drm_plane *plane,
> >> >> > + struct drm_plane_state *state)
> >> >> > +{
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +static void fsl_dcu_drm_plane_atomic_disable(struct drm_plane
> *plane,
> >> >> > + struct drm_plane_state *old_state)
> >> >> > +{
> >> >> > +}
> >> >> > +
> >> >> > +void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane,
> >> >> > + struct drm_plane_state *old_state)
> >> >> > +{
> >> >> > + struct fsl_dcu_drm_device *fsl_dev = plane->dev->dev_private;
> >> >> > + struct drm_plane_state *state = plane->state;
> >> >> > + struct drm_framebuffer *fb = plane->state->fb;
> >> >> > + u32 index, alpha, bpp;
> >> >> > + struct drm_gem_cma_object *gem;
> >> >> > + struct fsl_dcu_drm_plane *fsl_plane = to_fsl_dcu_plane(plane);
> >> >> > +
> >> >> > + index = fsl_plane->index;
> >> >> > + gem = drm_fb_cma_get_gem_obj(fb, 0);
> >> >> > +
> >> >> > + switch (fb->pixel_format) {
> >> >> > + case DRM_FORMAT_RGB565:
> >> >> > + bpp = FSL_DCU_RGB565;
> >> >> > + alpha = 0xff;
> >> >> > + break;
> >> >> > + case DRM_FORMAT_RGB888:
> >> >> > + bpp = FSL_DCU_RGB888;
> >> >> > + alpha = 0xff;
> >> >> > + break;
> >> >> > + case DRM_FORMAT_ARGB8888:
> >> >> > + bpp = FSL_DCU_ARGB8888;
> >> >> > + alpha = 0xff;
> >> >> > + break;
> >> >> > + case DRM_FORMAT_BGRA4444:
> >> >> > + bpp = FSL_DCU_ARGB4444;
> >> >> > + alpha = 0xff;
> >> >> > + break;
> >> >> > + case DRM_FORMAT_ARGB1555:
> >> >> > + bpp = FSL_DCU_ARGB1555;
> >> >> > + alpha = 0xff;
> >> >> > + break;
> >> >> > + case DRM_FORMAT_YUV422:
> >> >> > + bpp = FSL_DCU_YUV422;
> >> >> > + alpha = 0xff;
> >> >> > + break;
> >> >> > + default:
> >> >> > + return;
> >> >> > + }
> >> >> > +
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(index),
> >> >> > + DCU_CTRLDESCLN_1_HEIGHT(state->crtc_h) |
> >> >> > + DCU_CTRLDESCLN_1_WIDTH(state->crtc_w));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(index),
> >> >> > + DCU_CTRLDESCLN_2_POSY(state->crtc_y) |
> >> >> > + DCU_CTRLDESCLN_2_POSX(state->crtc_x));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(index), gem-
> >> >paddr);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(index),
> >> >> > + DCU_CTRLDESCLN_4_EN |
> >> >> > + DCU_CTRLDESCLN_4_TRANS(alpha) |
> >> >> > + DCU_CTRLDESCLN_4_BPP(bpp) |
> >> >> > + DCU_CTRLDESCLN_4_AB(0));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(index),
> >> >> > + DCU_CTRLDESCLN_5_CKMAX_R(0xFF) |
> >> >> > + DCU_CTRLDESCLN_5_CKMAX_G(0xFF) |
> >> >> > + DCU_CTRLDESCLN_5_CKMAX_B(0xFF));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(index),
> >> >> > + DCU_CTRLDESCLN_6_CKMIN_R(0) |
> >> >> > + DCU_CTRLDESCLN_6_CKMIN_G(0) |
> >> >> > + DCU_CTRLDESCLN_6_CKMIN_B(0));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_7(index), 0);
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(index),
> >> >> > + DCU_CTRLDESCLN_8_FG_FCOLOR(0));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(index),
> >> >> > + DCU_CTRLDESCLN_9_BG_BCOLOR(0));
> >> >> > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> >> >> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_10(index),
> >> >> > + DCU_CTRLDESCLN_10_POST_SKIP(0) |
> >> >> > + DCU_CTRLDESCLN_10_PRE_SKIP(0));
> >> >> > + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> >> >> > + DCU_MODE_DCU_MODE_MASK,
> >> >> > + DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
> >> >> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> >> >> DCU_UPDATE_MODE_READREG);
> >> >> > +}
> >> >> > +
> >> >> > +int fsl_dcu_drm_plane_disable(struct drm_plane *plane)
> >> >> > +{
> >> >> > + return 0;
> >> >> > +}
> >> >> > +
> >> >> > +void fsl_dcu_drm_plane_destroy(struct drm_plane *plane)
> >> >> > +{
> >> >> > + fsl_dcu_drm_plane_disable(plane);
> >> >> > + drm_plane_cleanup(plane);
> >> >> > +}
> >> >> > +
> >> >> > +static const uint32_t fsl_dcu_drm_plane_formats[] = {
> >> >> > + DRM_FORMAT_RGB565,
> >> >> > + DRM_FORMAT_RGB888,
> >> >> > + DRM_FORMAT_ARGB8888,
> >> >> > + DRM_FORMAT_ARGB4444,
> >> >> > + DRM_FORMAT_ARGB1555,
> >> >> > + DRM_FORMAT_YUV422,
> >> >> > +};
> >> >> > +
> >> >> > +static const struct drm_plane_funcs fsl_dcu_drm_plane_funcs = {
> >> >> > + .update_plane = drm_atomic_helper_update_plane,
> >> >> > + .disable_plane = drm_atomic_helper_disable_plane,
> >> >> > + .destroy = fsl_dcu_drm_plane_destroy,
> >> >> > + .atomic_duplicate_state =
> >> drm_atomic_helper_plane_duplicate_state,
> >> >> > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> >> >> > + .reset = drm_atomic_helper_plane_reset,
> >> >> > +};
> >> >> > +
> >> >> > +static const struct drm_plane_helper_funcs
> >> >> fsl_dcu_drm_plane_helper_funcs = {
> >> >> > + .prepare_fb = fsl_dcu_drm_plane_prepare_fb,
> >> >> > + .cleanup_fb = fsl_dcu_drm_plane_cleanup_fb,
> >> >> > + .atomic_check = fsl_dcu_drm_plane_atomic_check,
> >> >> > + .atomic_update = fsl_dcu_drm_plane_atomic_update,
> >> >> > + .atomic_disable = fsl_dcu_drm_plane_atomic_disable,
> >> >> > +};
> >> >> > +
> >> >> > +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct
> drm_device
> >> >> *dev)
> >> >> > +{
> >> >> > + struct drm_plane *primary;
> >> >> > + int ret;
> >> >> > +
> >> >> > + primary = kzalloc(sizeof(*primary), GFP_KERNEL);
> >> >> > + if (!primary) {
> >> >> > + DRM_DEBUG_KMS("Failed to allocate primary plane\n");
> >> >> > + return NULL;
> >> >> > + }
> >> >> > +
> >> >> > + /* possible_crtc's will be filled in later by crtc_init */
> >> >> > + ret = drm_universal_plane_init(dev, primary, 0,
> >> >> > + &fsl_dcu_drm_plane_funcs,
> >> >> > + fsl_dcu_drm_plane_formats,
> >> >> > + ARRAY_SIZE(fsl_dcu_drm_plane_formats),
> >> >> > + DRM_PLANE_TYPE_PRIMARY);
> >> >> > + if (ret) {
> >> >> > + kfree(primary);
> >> >> > + primary = NULL;
> >> >> > + }
> >> >> > + drm_plane_helper_add(primary, &fsl_dcu_drm_plane_helper_funcs);
> >> >> > +
> >> >> > + return primary;
> >> >> > +}
> >> >> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> >> >> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> >> >> > new file mode 100644
> >> >> > index 0000000..ccbfa61
> >> >> > --- /dev/null
> >> >> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> >> >> > @@ -0,0 +1,23 @@
> >> >> > +/*
> >> >> > + * Copyright 2015 Freescale Semiconductor, Inc.
> >> >> > + *
> >> >> > + * Freescale DCU drm device driver
> >> >> > + *
> >> >> > + * This program is free software; you can redistribute it and/or
> >> modify
> >> >> > + * it under the terms of the GNU General Public License as
> published
> >> by
> >> >> > + * the Free Software Foundation; either version 2 of the License,
> or
> >> >> > + * (at your option) any later version.
> >> >> > + */
> >> >> > +
> >> >> > +#ifndef __FSL_DCU_DRM_PLANE_H__
> >> >> > +#define __FSL_DCU_DRM_PLANE_H__
> >> >> > +
> >> >> > +struct fsl_dcu_drm_device;
> >> >> > +struct fsl_dcu_drm_plane {
> >> >> > + struct drm_plane plane;
> >> >> > + unsigned int index;
> >> >> > +};
> >> >> > +
> >> >> > +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct
> drm_device
> >> >> *dev);
> >> >> > +
> >> >> > +#endif /* __FSL_DCU_DRM_PLANE_H__ */



\
 
 \ /
  Last update: 2015-04-15 12:21    [W:0.196 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site