lkml.org 
[lkml]   [2015]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/3] firmware: qcom: scm: Split out 32-bit specific SCM code
Date
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
drivers/firmware/Makefile | 3 +-
drivers/firmware/{qcom_scm.c => qcom_scm-32.c} | 15 +-
drivers/firmware/qcom_scm.c | 442 +------------------------
drivers/firmware/qcom_scm.h | 29 ++
4 files changed, 42 insertions(+), 447 deletions(-)
copy drivers/firmware/{qcom_scm.c => qcom_scm-32.c} (96%)
create mode 100644 drivers/firmware/qcom_scm.h

diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3fdd391..3001f1a 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -12,7 +12,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
-CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o
+CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)

obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm-32.c
similarity index 96%
copy from drivers/firmware/qcom_scm.c
copy to drivers/firmware/qcom_scm-32.c
index 994b50f..89be15e 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -27,6 +27,7 @@
#include <asm/outercache.h>
#include <asm/cacheflush.h>

+#include "qcom_scm.h"

#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
@@ -386,8 +387,6 @@ u32 qcom_scm_get_version(void)
}
EXPORT_SYMBOL(qcom_scm_get_version);

-#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_ADDR 0x1
/*
* Set the cold/warm boot address for one of the CPU cores.
*/
@@ -412,7 +411,7 @@ static int qcom_scm_set_boot_addr(u32 addr, int flags)
* Set the cold boot address of the cpus. Any cpu outside the supported
* range would be removed from the cpu present mask.
*/
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
int flags = 0;
int cpu;
@@ -435,7 +434,6 @@ int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)

return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
}
-EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);

/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
@@ -445,7 +443,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
int ret;
int flags = 0;
@@ -473,10 +471,6 @@ int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)

return ret;
}
-EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
-
-#define QCOM_SCM_CMD_TERMINATE_PC 0x2
-#define QCOM_SCM_FLUSH_FLAG_MASK 0x3

/**
* qcom_scm_cpu_power_down() - Power down the cpu
@@ -486,9 +480,8 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
* the control would return from this function, otherwise, the cpu jumps to the
* warm boot entry point set for this cpu upon reset.
*/
-void qcom_scm_cpu_power_down(u32 flags)
+void __qcom_scm_cpu_power_down(u32 flags)
{
qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
-EXPORT_SYMBOL(qcom_scm_cpu_power_down);
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 994b50f..9989241 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -16,393 +16,12 @@
* 02110-1301, USA.
*/

-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/types.h>
#include <linux/qcom_scm.h>

-#include <asm/outercache.h>
-#include <asm/cacheflush.h>
-
-
-#define QCOM_SCM_ENOMEM -5
-#define QCOM_SCM_EOPNOTSUPP -4
-#define QCOM_SCM_EINVAL_ADDR -3
-#define QCOM_SCM_EINVAL_ARG -2
-#define QCOM_SCM_ERROR -1
-#define QCOM_SCM_INTERRUPTED 1
-
-#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
-#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
-#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
-
-#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
-#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
-#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
-
-struct qcom_scm_entry {
- int flag;
- void *entry;
-};
-
-static struct qcom_scm_entry qcom_scm_wb[] = {
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
-};
-
-static DEFINE_MUTEX(qcom_scm_lock);
-
-/**
- * struct qcom_scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from qcom_scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- * ------------------- <--- struct qcom_scm_command
- * | command header |
- * ------------------- <--- qcom_scm_get_command_buffer()
- * | command buffer |
- * ------------------- <--- struct qcom_scm_response and
- * | response header | qcom_scm_command_to_response()
- * ------------------- <--- qcom_scm_get_response_buffer()
- * | response buffer |
- * -------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate qcom_scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct qcom_scm_command {
- __le32 len;
- __le32 buf_offset;
- __le32 resp_hdr_offset;
- __le32 id;
- __le32 buf[0];
-};
-
-/**
- * struct qcom_scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of qcom_scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct qcom_scm_response {
- __le32 len;
- __le32 buf_offset;
- __le32 is_complete;
-};
-
-/**
- * alloc_qcom_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
- */
-static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct qcom_scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
- resp_size;
- u32 offset;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = cpu_to_le32(len);
- offset = offsetof(struct qcom_scm_command, buf);
- cmd->buf_offset = cpu_to_le32(offset);
- cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
- }
- return cmd;
-}
-
-/**
- * free_qcom_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
- * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct qcom_scm_response *qcom_scm_command_to_response(
- const struct qcom_scm_command *cmd)
-{
- return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
-}
-
-/**
- * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
-{
- return (void *)cmd->buf;
-}
-
-/**
- * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
-{
- return (void *)rsp + le32_to_cpu(rsp->buf_offset);
-}
-
-static int qcom_scm_remap_error(int err)
-{
- pr_err("qcom_scm_call failed with error code %d\n", err);
- switch (err) {
- case QCOM_SCM_ERROR:
- return -EIO;
- case QCOM_SCM_EINVAL_ADDR:
- case QCOM_SCM_EINVAL_ARG:
- return -EINVAL;
- case QCOM_SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case QCOM_SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
- int context_id;
- register u32 r0 asm("r0") = 1;
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = cmd_addr;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- } while (r0 == QCOM_SCM_INTERRUPTED);
-
- return r0;
-}
-
-static int __qcom_scm_call(const struct qcom_scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the command buffer so that the secure world sees
- * the correct data.
- */
- __cpuc_flush_dcache_area((void *)cmd, cmd->len);
- outer_flush_range(cmd_addr, cmd_addr + cmd->len);
-
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = qcom_scm_remap_error(ret);
-
- return ret;
-}
-
-static void qcom_scm_inv_range(unsigned long start, unsigned long end)
-{
- u32 cacheline_size, ctr;
-
- asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
- cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
- start = round_down(start, cacheline_size);
- end = round_up(end, cacheline_size);
- outer_inv_range(start, end);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += cacheline_size;
- }
- dsb();
- isb();
-}
-
-/**
- * qcom_scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- *
- * A note on cache maintenance:
- * Note that any buffers that are expected to be accessed by the secure world
- * must be flushed before invoking qcom_scm_call and invalidated in the cache
- * immediately after qcom_scm_call returns. Cache maintenance on the command
- * and response buffers is taken care of by qcom_scm_call; however, callers are
- * responsible for any other cached buffers passed over to the secure world.
- */
-static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
- size_t cmd_len, void *resp_buf, size_t resp_len)
-{
- int ret;
- struct qcom_scm_command *cmd;
- struct qcom_scm_response *rsp;
- unsigned long start, end;
-
- cmd = alloc_qcom_scm_command(cmd_len, resp_len);
- if (!cmd)
- return -ENOMEM;
-
- cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
- if (cmd_buf)
- memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
- mutex_lock(&qcom_scm_lock);
- ret = __qcom_scm_call(cmd);
- mutex_unlock(&qcom_scm_lock);
- if (ret)
- goto out;
-
- rsp = qcom_scm_command_to_response(cmd);
- start = (unsigned long)rsp;
-
- do {
- qcom_scm_inv_range(start, start + sizeof(*rsp));
- } while (!rsp->is_complete);
-
- end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
- qcom_scm_inv_range(start, end);
-
- if (resp_buf)
- memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
-out:
- free_qcom_scm_command(cmd);
- return ret;
-}
-
-#define SCM_CLASS_REGISTER (0x2 << 8)
-#define SCM_MASK_IRQS BIT(5)
-#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
- SCM_CLASS_REGISTER | \
- SCM_MASK_IRQS | \
- (n & 0xf))
-
-/**
- * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @arg1: first argument
- *
- * This shall only be used with commands that are guaranteed to be
- * uninterruptable, atomic and SMP safe.
- */
-static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
-{
- int context_id;
-
- register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = arg1;
-
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- return r0;
-}
-
-u32 qcom_scm_get_version(void)
-{
- int context_id;
- static u32 version = -1;
- register u32 r0 asm("r0");
- register u32 r1 asm("r1");
-
- if (version != -1)
- return version;
-
- mutex_lock(&qcom_scm_lock);
-
- r0 = 0x1 << 8;
- r1 = (u32)&context_id;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r1")
- __asmeq("%2", "r0")
- __asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0), "=r" (r1)
- : "r" (r0), "r" (r1)
- : "r2", "r3");
- } while (r0 == QCOM_SCM_INTERRUPTED);
-
- version = r1;
- mutex_unlock(&qcom_scm_lock);
-
- return version;
-}
-EXPORT_SYMBOL(qcom_scm_get_version);
-
-#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_ADDR 0x1
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-static int qcom_scm_set_boot_addr(u32 addr, int flags)
-{
- struct {
- __le32 flags;
- __le32 addr;
- } cmd;
-
- cmd.addr = cpu_to_le32(addr);
- cmd.flags = cpu_to_le32(flags);
- return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
+#include "qcom_scm.h"

/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
@@ -414,26 +33,7 @@ static int qcom_scm_set_boot_addr(u32 addr, int flags)
*/
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
- int flags = 0;
- int cpu;
- int scm_cb_flags[] = {
- QCOM_SCM_FLAG_COLDBOOT_CPU0,
- QCOM_SCM_FLAG_COLDBOOT_CPU1,
- QCOM_SCM_FLAG_COLDBOOT_CPU2,
- QCOM_SCM_FLAG_COLDBOOT_CPU3,
- };
-
- if (!cpus || (cpus && cpumask_empty(cpus)))
- return -EINVAL;
-
- for_each_cpu(cpu, cpus) {
- if (cpu < ARRAY_SIZE(scm_cb_flags))
- flags |= scm_cb_flags[cpu];
- else
- set_cpu_present(cpu, false);
- }
-
- return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ return __qcom_scm_set_cold_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);

@@ -447,37 +47,10 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- int ret;
- int flags = 0;
- int cpu;
-
- /*
- * Reassign only if we are switching from hotplug entry point
- * to cpuidle entry point or vice versa.
- */
- for_each_cpu(cpu, cpus) {
- if (entry == qcom_scm_wb[cpu].entry)
- continue;
- flags |= qcom_scm_wb[cpu].flag;
- }
-
- /* No change in entry function */
- if (!flags)
- return 0;
-
- ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
- if (!ret) {
- for_each_cpu(cpu, cpus)
- qcom_scm_wb[cpu].entry = entry;
- }
-
- return ret;
+ return __qcom_scm_set_warm_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);

-#define QCOM_SCM_CMD_TERMINATE_PC 0x2
-#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
-
/**
* qcom_scm_cpu_power_down() - Power down the cpu
* @flags - Flags to flush cache
@@ -488,7 +61,6 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
*/
void qcom_scm_cpu_power_down(u32 flags)
{
- qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
- flags & QCOM_SCM_FLUSH_FLAG_MASK);
+ __qcom_scm_cpu_power_down(flags);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
new file mode 100644
index 0000000..9fbede4
--- /dev/null
+++ b/drivers/firmware/qcom_scm.h
@@ -0,0 +1,29 @@
+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_SCM_INT_H
+#define __QCOM_SCM_INT_H
+
+#define QCOM_SCM_SVC_BOOT 0x1
+#define QCOM_SCM_BOOT_ADDR 0x1
+#define QCOM_SCM_BOOT_ADDR_MC 0x11
+
+#define QCOM_SCM_FLAG_HLOS 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
+extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+
+#define QCOM_SCM_CMD_TERMINATE_PC 0x2
+#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
+#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
+extern void __qcom_scm_cpu_power_down(u32 flags);
+#endif
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-04-14 22:21    [W:0.191 / U:31.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site