Messages in this thread | | | Date | Tue, 14 Apr 2015 13:57:02 +0200 | From | Sascha Hauer <> | Subject | Re: [PATCH v11]: clk: Add common clock support for Mediatek MT8135 and MT8173 |
| |
On Tue, Apr 14, 2015 at 01:01:30PM +0200, Matthias Brugger wrote: > Hi Sascha, > > 2015-04-14 12:08 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>: > > Hi Matthias, > > > > On Tue, Apr 07, 2015 at 01:47:58PM +0200, Matthias Brugger wrote: > >> Hi Sascha, > >> > >> > >> 2015-03-31 20:16 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>: > >> > > >> > The following changes since commit 9eccca0843205f87c00404b663188b88eb248051: > >> > > >> > Linux 4.0-rc3 (2015-03-08 16:09:09 -0700) > >> > > >> > are available in the git repository at: > >> > > >> > git://git.pengutronix.de/git/imx/linux-2.6.git tags/v4.0-clk-mediatek-v11 > >> > > >> > for you to fetch changes up to ae9129219143cfdefe8b3a463deb8c5cb8955525: > >> > > >> > dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers (2015-03-31 20:08:46 +0200) > >> > > >> > ---------------------------------------------------------------- > >> > This patchset contains the initial common clock support for Mediatek SoCs. > >> > Mediatek SoC's clock architecture comprises of various PLLs, dividers, muxes > >> > and clock gates. > >> > >> I tried the patch set on my mt8135 eval board. I used the dts bindings > >> from a former version of this set [1], but it does not boot the board > >> (based on v4.0-rc7). > >> Do you have any hint, what is happening, or are the bindings wrong? > > > > I just tried on a v4.0 with > > - this series applied > > - the dts patch applied (which is still up-to-date) > > - multi_v7_defconfig > > > > And it still works. What do you mean with "does not boot the board"? No > > console output? Could you try with earlyprintk? > > The probelms I see is, that with the clock patches, I'm not able to > boot into a initramfs [1]. > Whereas if I just comment topckgen and preicfg in the dts, I'm able to > get the a serial console of my initramfs [2]. > > I wonder if you are able to get serial console from the initramfs with > the clock patches + dts patch?
So you get kernel messages but no output from initramfs? In this case the kernel disables the unused clocks in a late_initcall. The UART driver still uses the dummy clock provided in the dtsi, so the real UART clk gets disabled in the initcall. Try passing clk_ignore_unused to the kernel
Sascha
-- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
| |