lkml.org 
[lkml]   [2015]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] x86/ACPI: Fix regression caused by 16ee7b3dcc56 & c50f13c672df7
Date
On Monday, April 13, 2015 04:54:16 PM Jim Bos wrote:
> On 04/13/2015 03:36 PM, Rafael J. Wysocki wrote:
> > On Monday, April 13, 2015 01:30:20 AM Rafael J. Wysocki wrote:
> >> On Sunday, April 12, 2015 11:03:30 AM Jim Bos wrote:
> >>> On 04/12/2015 03:29 AM, Rafael J. Wysocki wrote:
> >>>> On Saturday, April 11, 2015 05:08:38 PM Jim Bos wrote:
> >>>>> On 04/10/2015 03:56 AM, Jiang Liu wrote:
> >>>>>> On 2015/4/10 0:41, Jim Bos wrote:
> >>>>>>> On 04/09/2015 12:15 PM, Jiang Liu wrote:
> >>>>>>>> On 2015/4/8 23:51, Jim Bos wrote:
> >>>>>>>>> On 04/08/2015 07:26 AM, Jiang Liu wrote:
> >>>>>>>>>> On 2015/4/8 0:49, Jim Bos wrote:
> >>>>>>>>>>> On 04/07/2015 04:34 PM, Jiang Liu wrote:
> >>>>>> <snip>
> >>>>>>>> Hi Jim,
> >>>>>>>> I'm really confused. I can't even explain why my previous
> >>>>>>>> patch fixes the issue on AMD geode board now:(
> >>>>>>>>
> >>>>>>>> For the Dell laptop, seems you have:
> >>>>>>>> 1) build a kernel with Local APIC and IOAPIC enabled
> >>>>>>>> 2) lapic is disabled by BIOS, so there's no ACPI MADT(APIC)
> >>>>>>>> table at all.
> >>>>>>>> That means the laptop is working with 8259 PICs only.
> >>>>>>>> There's little change between 3.16 and 4.0 related to 8259.
> >>>>>>>>
> >>>>>>>> For the AMD geode board, I still think original code is right.
> >>>>>>>> I can't explain why the patch fix the issue.
> >>>>>>>>
> >>>>>>>> So could you please help to:
> >>>>>>>> 1) Try to enable lapic on Dell laptop in BIOS
> >>>>>>>> 2) Dump acpi tables and dmesg on AMD board
> >>>>>>>>
> >>>>>>>> If that still doesn't help, I will try to send you some
> >>>>>>>> debug patches to gather more info.
> >>>>>>>> Thanks!
> >>>>>>>> Gerry
> >>>>>>>>> _
> >>>>>>>>> Jim
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>> Gerry,
> >>>>>>>
> >>>>>>> As you mentioned your patch shouldn't make a difference, run some more
> >>>>>>> tests, as it turns out:
> >>>>>>> - geode system broken on 3.16+ up to and including 3.19, however, on
> >>>>>>> plain 4.0-rc6 it works! Root cause appears to be there isn't an ACPI
> >>>>>>> interrupt assigned in non-working kernels.
> >>>>>>> - other system I got my hands on: Pentium(R) CPU G3220, broken on 3.19.0
> >>>>>>> when boot parameter 'nosmp' is specified, again no acpi entry in
> >>>>>>> /proc/interrupts, working fine on 4.0-rc6
> >>>>>>>
> >>>>>>> So obviously between 3.19 and 4.0-rc6 something got fixed here!
> >>>>>> Hi Jim,
> >>>>>> Yes, the bugfix patch should be:
> >>>>>> commit 1ea76fbadd66("x86/irq: Fix regression caused by commit b568b8601f05")
> >>>>>>
> >>>>>>> The Dell laptop remains the only problem then on 4.0-rc6, there IS an
> >>>>>>> acpi interrupt (but firing once apparently).
> >>>>>>> There isn't an option in BIOS to enable LAPIC, however, when specifying
> >>>>>>> 'lapic' as boot parameter I got interesting result, still not working
> >>>>>>> and /proc/interrups still shows XT-PIC. Doing a diff between dmesg on
> >>>>>>> 3.19 and 4.0-rc6 this pops out:
> >>>>>>>
> >>>>>>> -Local APIC disabled by BIOS -- you can enable it with "lapic"
> >>>>>>> -APIC: disable apic facility
> >>>>>>> -APIC: switched to apic NOOP
> >>>>>>> +Local APIC disabled by BIOS -- reenabling.
> >>>>>>> +Found and enabled local APIC!
> >>>>>>>
> >>>>>>> +Enabling APIC mode: Flat. Using 0 I/O APICs
> >>>>>> What's the last know working kernel for Dell laptop?
> >>>>>> Does it work as expected with v3.19 kernel?
> >>>>>> Do you means this message is from plain v4.0-rc6 kernel?
> >>>>>> Thanks!
> >>>>>> Gerry
> >>>>>>
> >>>>>>>
> >>>>>>> Jim
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>> Gerry, Rafael,
> >>>>>
> >>>>> Ok, found it.
> >>>>> It was very 'interesting' bisect, because there were 2 overlapping
> >>>>> issues here. On the Dell laptop some kernels there wasn't an ACPI
> >>>>> interrupt at all or it fired once and then seemed to get stuck.
> >>>>> Turns out that kernel version:
> >>>>> 3.16: OK
> >>>>> 3.17: Broken (no acpi interrupt)
> >>>>> 3.18: actually fine
> >>>>> 3.19: Broken
> >>>>>
> >>>>> So started bisecting between 3.18 or 3.19, in the end found Rafael's
> >>>>> patch which broke it:
> >>>>>
> >>>>> ==
> >>>>> commit c50f13c672df758b59e026c15b9118f3ed46edc4
> >>>>> Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>>>> Date: Mon Dec 1 23:50:16 2014 +0100
> >>>>>
> >>>>> ACPICA: Save current masks of enabled GPEs after enable register writes
> >>>>> ==
> >>>>>
> >>>>> Reverting that patch on top of 4.0-rc7 (with some offsets and one
> >>>>> trivial manual edit) and I finally got a working ACPI interrupt again!
> >>>>
> >>>> That's unexpected.
> >>>>
> >>>> Is system suspend/resume involved in the reproduction of the problem in any way?
> >>>>
> >>>> In any case, does it help if you replace "enable_mask" with "enable_for_run"
> >>>> in line 127 of drivers/acpi/acpica/hwgpe.c (without reverting the whole commit)?
> >>>>
> >>>>
> >>>
> >>> No suspends/resumes, but this suggestion works :-)
> >>
> >> OK
> >>
> >>> --- hwgpe.c.ORIG 2015-04-12 10:41:11.754104398 +0200
> >>> +++ hwgpe.c 2015-04-12 10:42:38.021283593 +0200
> >>> @@ -124,7 +124,7 @@
> >>>
> >>> /* Only enable if the corresponding enable_mask bit is
> >>> set */
> >>>
> >>> - if (!(register_bit & gpe_register_info->enable_mask)) {
> >>> + if (!(register_bit & gpe_register_info->enable_for_run)) {
> >>> return (AE_BAD_PARAMETER);
> >>> }
> >>>
> >>> Tested-by: Jim Bos <jim876@xs4all.nl>
> >>
> >> No, no, this is not a fix. :-)
> >>
> >> It means, though, that enable_for_run and enable_mask diverge at one point and,
> >> moreover, enable_for_run has more bits set, which is *really* mysterious.
> >>
> >> So the only place modifying enable_for_run is acpi_ev_update_gpe_enable_mask()
> >> which roughly does this:
> >> (a) Find the register bit corresponding to the given GPE.
> >> (b) Clear that bit in enable_for_run.
> >> (c) If runtime_count is set for the GPE, set that bit in enable_for_run.
> >> Thus the only case when a bit may be set in enable_for_run is when runtime_count
> >> is nonzero for the GPE in acpi_ev_update_gpe_enable_mask().
> >>
> >> Now, acpi_ev_update_gpe_enable_mask() is only called from two places,
> >> acpi_ev_add_gpe_reference() and acpi_ev_remove_gpe_reference(). The former
> >> calls it when runtime_count has just been incremented and is now equal to one
> >> and the latter calls it when runtime_count has just been decremented and is now
> >> equal to zero. Hence, if all of the involved functions return AE_OK,
> >> acpi_ev_add_gpe_reference() may set the corresponding bit in enable_for_run
> >> and acpi_ev_remove_gpe_reference() may clear it.
> >>
> >> Further, having set the bit in enable_for_run, acpi_ev_add_gpe_reference() calls
> >> acpi_ev_enable_gpe() which then calls acpi_hw_low_set_gpe() with ACPI_GPE_SAVE_MASK
> >> set in the second argument. Again, this causes the corresponding bit to be set in
> >> the register's enable_mask, unless any errors are returned. In that case the
> >> bit will be set in both enable_for_run and enable_mask and analogously for
> >> acpi_ev_remove_gpe_reference(). So if I'm not overlooking anything and if all of
> >> the involved calls are successful, enable_for_run and enable_mask will always be
> >> in sync.
> >>
> >> As far as I can say that may change *only* if there's an error, because in that
> >> case (1) we may not save the mask that we attempted to write to the register and
> >> (2) we will reset runtime_count *without* updating enable_for_run which arguably
> >> is a bug. So the previous patch might just work accidentally.
> >>
> >> If that theory holds any water, the patch below may help too (instead of the
> >> previous one), so please test it. If it doesn't help, we'll need to find out
> >> what exactly happens on that system, but surely it is *not* usual behavior.
> >
> > Actually, the one below is better, so please test this one instead.
> >
> > ---
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > Subject: ACPICA: Store GPE register enable masks upfront
> >
> > It is reported that ACPI interrupts do not work any more on
> > Dell Latitude D600 after commit c50f13c672df (ACPICA: Save
> > current masks of enabled GPEs after enable register writes).
> > The problem turns out to be related to the fact that the
> > enable_mask and enable_for_run GPE bit masks are not in
> > sync (in the absence of any system suspend/resume events)
> > for at least one GPE register on that machine.
> >
> > Address this problem by writing the enable_for_run mask into
> > enable_mask as soon as enable_for_run is updated instead of
> > doing that only after the subsequent register write has
> > succeeded. For consistency, update acpi_hw_gpe_enable_write()
> > to store the bit mask to be written into the GPE register
> > in enable_mask unconditionally before the write.
> >
> > Since the ACPI_GPE_SAVE_MASK flag is not necessary any more after
> > that, drop it along with the symbols depending on it.
> >
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> > drivers/acpi/acpica/evgpe.c | 5 +++--
> > drivers/acpi/acpica/hwgpe.c | 11 ++++-------
> > include/acpi/actypes.h | 4 ----
> > 3 files changed, 7 insertions(+), 13 deletions(-)
> >
> > Index: linux-pm/drivers/acpi/acpica/hwgpe.c
> > ===================================================================
> > --- linux-pm.orig/drivers/acpi/acpica/hwgpe.c
> > +++ linux-pm/drivers/acpi/acpica/hwgpe.c
> > @@ -89,6 +89,8 @@ u32 acpi_hw_get_gpe_register_bit(struct
> > * RETURN: Status
> > *
> > * DESCRIPTION: Enable or disable a single GPE in the parent enable register.
> > + * The enable_mask field of the involved GPE register structure
> > + * must be updated by the caller if necessary.
> > *
> > ******************************************************************************/
> >
> > @@ -119,7 +121,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_even
> > /* Set or clear just the bit that corresponds to this GPE */
> >
> > register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
> > - switch (action & ~ACPI_GPE_SAVE_MASK) {
> > + switch (action) {
> > case ACPI_GPE_CONDITIONAL_ENABLE:
> >
> > /* Only enable if the corresponding enable_mask bit is set */
> > @@ -149,9 +151,6 @@ acpi_hw_low_set_gpe(struct acpi_gpe_even
> > /* Write the updated enable mask */
> >
> > status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
> > - if (ACPI_SUCCESS(status) && (action & ACPI_GPE_SAVE_MASK)) {
> > - gpe_register_info->enable_mask = (u8)enable_mask;
> > - }
> > return (status);
> > }
> >
> > @@ -286,10 +285,8 @@ acpi_hw_gpe_enable_write(u8 enable_mask,
> > {
> > acpi_status status;
> >
> > + gpe_register_info->enable_mask = enable_mask;
> > status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
> > - if (ACPI_SUCCESS(status)) {
> > - gpe_register_info->enable_mask = enable_mask;
> > - }
> > return (status);
> > }
> >
> > Index: linux-pm/include/acpi/actypes.h
> > ===================================================================
> > --- linux-pm.orig/include/acpi/actypes.h
> > +++ linux-pm/include/acpi/actypes.h
> > @@ -736,10 +736,6 @@ typedef u32 acpi_event_status;
> > #define ACPI_GPE_ENABLE 0
> > #define ACPI_GPE_DISABLE 1
> > #define ACPI_GPE_CONDITIONAL_ENABLE 2
> > -#define ACPI_GPE_SAVE_MASK 4
> > -
> > -#define ACPI_GPE_ENABLE_SAVE (ACPI_GPE_ENABLE | ACPI_GPE_SAVE_MASK)
> > -#define ACPI_GPE_DISABLE_SAVE (ACPI_GPE_DISABLE | ACPI_GPE_SAVE_MASK)
> >
> > /*
> > * GPE info flags - Per GPE
> > Index: linux-pm/drivers/acpi/acpica/evgpe.c
> > ===================================================================
> > --- linux-pm.orig/drivers/acpi/acpica/evgpe.c
> > +++ linux-pm/drivers/acpi/acpica/evgpe.c
> > @@ -92,6 +92,7 @@ acpi_ev_update_gpe_enable_mask(struct ac
> > ACPI_SET_BIT(gpe_register_info->enable_for_run,
> > (u8)register_bit);
> > }
> > + gpe_register_info->enable_mask = gpe_register_info->enable_for_run;
> >
> > return_ACPI_STATUS(AE_OK);
> > }
> > @@ -123,7 +124,7 @@ acpi_status acpi_ev_enable_gpe(struct ac
> >
> > /* Enable the requested GPE */
> >
> > - status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE_SAVE);
> > + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
> > return_ACPI_STATUS(status);
> > }
> >
> > @@ -202,7 +203,7 @@ acpi_ev_remove_gpe_reference(struct acpi
> > if (ACPI_SUCCESS(status)) {
> > status =
> > acpi_hw_low_set_gpe(gpe_event_info,
> > - ACPI_GPE_DISABLE_SAVE);
> > + ACPI_GPE_DISABLE);
> > }
> >
> > if (ACPI_FAILURE(status)) {
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
> Works! If this is actually the fix ;-)
>
> Tested-by: Jim Bos <jim876@xs4all.nl>

Yes, this is the fix I'd like to apply unless others have objections.

Thanks!


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2015-04-13 22:01    [W:0.062 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site