[lkml]   [2015]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini

Here are two patches to bring support for a new hardware based on SAM9G25 SoC.

The first one adds the PIN controller definition for PWM0.
The second defines the new board.

Changes since v1:
- drop useless comments
- move pwm0 pinctrl's node close to tcb0
- drop ek boards from compatible machine
- add at91sam9g25 board to compatible machine

Changes since v2:
- update to v4.0
- fix alphabetical order between gpio_keys and pwm_leds

Best regards,
Gaël PORTAY (2):
ARM: at91/dt: sam9x5: add pinctrl for pwm0
ARM: at91/dt: add support for kizboxmini

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts


 \ /
  Last update: 2015-04-13 17:01    [W:0.070 / U:2.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site