lkml.org 
[lkml]   [2015]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next: build failure after merge of the omap tree
* Stephen Rothwell <sfr@canb.auug.org.au> [150406 18:37]:
> Hi Tony,
>
> After merging the omap tree, today's linux-next build (arm
> multi_v7_defconfig) failed like this:
>
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/am3517_mt_ventoux.dtb] Error 2
> make[2]: *** [arch/arm/boot/dts/omap3430-sdp.dtb] Error 2
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/omap3-beagle-xm.dtb] Error 2
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/omap3-beagle-xm-ab.dtb] Error 2
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/omap3-beagle.dtb] Error 2
> make[2]: *** [arch/arm/boot/dts/omap3-devkit8000.dtb] Error 2
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/omap3-cm-t3530.dtb] Error 2
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/omap3-cm-t3730.dtb] Error 2
> make[2]: *** [arch/arm/boot/dts/omap3-evm-37xx.dtb] Error 2
> ERROR (phandle_references): Reference to non-existent node or label "omap3_scm_general"
>
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[2]: *** [arch/arm/boot/dts/omap3-evm.dtb] Error 2
>
> Presumably caused by commit b8845074cfbb ("ARM: dts: omap3: add minimal
> l4 bus layout with control module support") interacting with commit
> e52117638b79 ("ARM: dts: omap3: Add DT entries for OMAP 3 ISP") from
> the arm-soc tree.
>
> I applied the following merge fix patch for today (probably wrong, but
> hopefully builds):
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 7 Apr 2015 11:30:14 +1000
> Subject: [PATCH] ARM: dts: omap3: fixup for merge conflict around
> omap3_scm_general

Sorry did not notice this until today, yes that's the correct fix thanks.

Regards,

Tony

> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> arch/arm/boot/dts/omap34xx.dtsi | 2 +-
> arch/arm/boot/dts/omap36xx.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> index 7bc8c0f72ddb..4f6b2d5b1902 100644
> --- a/arch/arm/boot/dts/omap34xx.dtsi
> +++ b/arch/arm/boot/dts/omap34xx.dtsi
> @@ -46,7 +46,7 @@
> 0x480bd800 0x017c>;
> interrupts = <24>;
> iommus = <&mmu_isp>;
> - syscon = <&omap3_scm_general 0xdc>;
> + syscon = <&scm_conf 0xdc>;
> ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
> #clock-cells = <1>;
> ports {
> diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
> index 3502fe00ec7d..86253de5a97a 100644
> --- a/arch/arm/boot/dts/omap36xx.dtsi
> +++ b/arch/arm/boot/dts/omap36xx.dtsi
> @@ -78,7 +78,7 @@
> 0x480bd800 0x0600>;
> interrupts = <24>;
> iommus = <&mmu_isp>;
> - syscon = <&omap3_scm_general 0x2f0>;
> + syscon = <&scm_conf 0x2f0>;
> ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
> #clock-cells = <1>;
> ports {
> --
> 2.1.4
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au




\
 
 \ /
  Last update: 2015-04-13 02:01    [W:0.046 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site