lkml.org 
[lkml]   [2015]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/21] Drivers: hv: fcopy: switch to using the hvutil_device_state state machine
Date
From: Vitaly Kuznetsov <vkuznets@redhat.com>

Switch to using the hvutil_device_state state machine from using 3 different state variables:
fcopy_transaction.active, opened, and in_hand_shake.

State transitions are:
-> HVUTIL_DEVICE_INIT when driver loads or on device release
-> HVUTIL_READY if the handshake was successful
-> HVUTIL_HOSTMSG_RECEIVED when there is a non-negotiation message from the host
-> HVUTIL_USERSPACE_REQ after userspace daemon read the message
-> HVUTIL_USERSPACE_RECV after/if userspace has replied
-> HVUTIL_READY after we respond to the host
-> HVUTIL_DEVICE_DYING on driver unload

In hv_fcopy_onchannelcallback() process ICMSGTYPE_NEGOTIATE messages even when
the userspace daemon is disconnected, otherwise we can make the host think
we don't support FCOPY and disable the service completely.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
---
drivers/hv/hv_fcopy.c | 70 +++++++++++++++++++++----------------------------
1 files changed, 30 insertions(+), 40 deletions(-)

diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c
index c14f0f4..a501301 100644
--- a/drivers/hv/hv_fcopy.c
+++ b/drivers/hv/hv_fcopy.c
@@ -47,15 +47,10 @@
* ensure this by serializing packet processing in this driver - we do not
* read additional packets from the VMBUs until the current packet is fully
* handled.
- *
- * The transaction "active" state is set when we receive a request from the
- * host and we cleanup this state when the transaction is completed - when we
- * respond to the host with our response. When the transaction active state is
- * set, we defer handling incoming packets.
*/

static struct {
- bool active; /* transaction status - active or not */
+ int state; /* hvutil_device_state */
int recv_len; /* number of bytes received. */
struct hv_fcopy_hdr *fcopy_msg; /* current message */
struct hv_start_fcopy message; /* sent to daemon */
@@ -65,14 +60,6 @@ static struct {
struct semaphore read_sema;
} fcopy_transaction;

-static bool opened; /* currently device opened */
-
-/*
- * Before we can accept copy messages from the host, we need
- * to handshake with the user level daemon. This state tracks
- * if we are in the handshake phase.
- */
-static bool in_hand_shake = true;
static void fcopy_send_data(void);
static void fcopy_respond_to_host(int error);
static void fcopy_timeout_func(struct work_struct *dummy);
@@ -87,6 +74,10 @@ static void fcopy_timeout_func(struct work_struct *dummy)
*/
fcopy_respond_to_host(HV_E_FAIL);

+ /* Transaction is finished, reset the state. */
+ if (fcopy_transaction.state > HVUTIL_READY)
+ fcopy_transaction.state = HVUTIL_READY;
+
/* In the case the user-space daemon crashes, hangs or is killed, we
* need to down the semaphore, otherwise, after the daemon starts next
* time, the obsolete data in fcopy_transaction.message or
@@ -118,10 +109,9 @@ static int fcopy_handle_handshake(u32 version)
}
pr_info("FCP: user-mode registering done. Daemon version: %d\n",
version);
- fcopy_transaction.active = false;
+ fcopy_transaction.state = HVUTIL_READY;
hv_poll_channel(fcopy_transaction.fcopy_context,
hv_fcopy_onchannelcallback);
- in_hand_shake = false;
return 0;
}

@@ -191,8 +181,6 @@ fcopy_respond_to_host(int error)
channel = fcopy_transaction.recv_channel;
req_id = fcopy_transaction.recv_req_id;

- fcopy_transaction.active = false;
-
icmsghdr = (struct icmsg_hdr *)
&recv_buffer[sizeof(struct vmbuspipe_hdr)];

@@ -220,7 +208,7 @@ void hv_fcopy_onchannelcallback(void *context)
int util_fw_version;
int fcopy_srv_version;

- if (fcopy_transaction.active) {
+ if (fcopy_transaction.state > HVUTIL_READY) {
/*
* We will defer processing this callback once
* the current transaction is complete.
@@ -252,12 +240,18 @@ void hv_fcopy_onchannelcallback(void *context)
* transaction; note transactions are serialized.
*/

- fcopy_transaction.active = true;
fcopy_transaction.recv_len = recvlen;
fcopy_transaction.recv_channel = channel;
fcopy_transaction.recv_req_id = requestid;
fcopy_transaction.fcopy_msg = fcopy_msg;

+ if (fcopy_transaction.state < HVUTIL_READY) {
+ /* Userspace is not registered yet */
+ fcopy_respond_to_host(HV_E_FAIL);
+ return;
+ }
+ fcopy_transaction.state = HVUTIL_HOSTMSG_RECEIVED;
+
/*
* Send the information to the user-level daemon.
*/
@@ -290,10 +284,10 @@ static ssize_t fcopy_read(struct file *file, char __user *buf,

/*
* The channel may be rescinded and in this case, we will wakeup the
- * the thread blocked on the semaphore and we will use the opened
- * state to correctly handle this case.
+ * the thread blocked on the semaphore and we will use the state to
+ * correctly handle this case.
*/
- if (!opened)
+ if (fcopy_transaction.state != HVUTIL_HOSTMSG_RECEIVED)
return -ENODEV;

operation = fcopy_transaction.fcopy_msg->operation;
@@ -312,6 +306,8 @@ static ssize_t fcopy_read(struct file *file, char __user *buf,
if (copy_to_user(buf, src, copy_size))
return -EFAULT;

+ fcopy_transaction.state = HVUTIL_USERSPACE_REQ;
+
return copy_size;
}

@@ -326,18 +322,23 @@ static ssize_t fcopy_write(struct file *file, const char __user *buf,
if (copy_from_user(&response, buf, sizeof(int)))
return -EFAULT;

- if (in_hand_shake) {
+ if (fcopy_transaction.state == HVUTIL_DEVICE_INIT) {
if (fcopy_handle_handshake(response))
return -EINVAL;
return sizeof(int);
}

+ if (fcopy_transaction.state != HVUTIL_USERSPACE_REQ)
+ return -EINVAL;
+
/*
* Complete the transaction by forwarding the result
* to the host. But first, cancel the timeout.
*/
- if (cancel_delayed_work_sync(&fcopy_timeout_work))
+ if (cancel_delayed_work_sync(&fcopy_timeout_work)) {
+ fcopy_transaction.state = HVUTIL_USERSPACE_RECV;
fcopy_respond_to_host(response);
+ fcopy_transaction.state = HVUTIL_READY;
hv_poll_channel(fcopy_transaction.fcopy_context,
hv_fcopy_onchannelcallback);
}
@@ -352,13 +353,9 @@ static int fcopy_open(struct inode *inode, struct file *f)
* really an extension of this driver. We can have only
* active open at a time.
*/
- if (opened)
+ if (fcopy_transaction.state != HVUTIL_DEVICE_INIT)
return -EBUSY;

- /*
- * The daemon is alive; setup the state.
- */
- opened = true;
return 0;
}

@@ -375,8 +372,7 @@ static int fcopy_release(struct inode *inode, struct file *f)
/*
* The daemon has exited; reset the state.
*/
- in_hand_shake = true;
- opened = false;
+ fcopy_transaction.state = HVUTIL_DEVICE_INIT;

if (cancel_delayed_work_sync(&fcopy_timeout_work)) {
/* We haven't up()-ed the semaphore(very rare)? */
@@ -410,13 +406,6 @@ static void fcopy_dev_deinit(void)
{

/*
- * The device is going away - perhaps because the
- * host has rescinded the channel. Setup state so that
- * user level daemon can gracefully exit if it is blocked
- * on the read semaphore.
- */
- opened = false;
- /*
* Signal the semaphore as the device is
* going away.
*/
@@ -434,7 +423,7 @@ int hv_fcopy_init(struct hv_util_service *srv)
* Defer processing channel callbacks until the daemon
* has registered.
*/
- fcopy_transaction.active = true;
+ fcopy_transaction.state = HVUTIL_DEVICE_INIT;
sema_init(&fcopy_transaction.read_sema, 0);

return fcopy_dev_init();
@@ -442,6 +431,7 @@ int hv_fcopy_init(struct hv_util_service *srv)

void hv_fcopy_deinit(void)
{
+ fcopy_transaction.state = HVUTIL_DEVICE_DYING;
cancel_delayed_work_sync(&fcopy_timeout_work);
fcopy_dev_deinit();
}
--
1.7.4.1


\
 
 \ /
  Last update: 2015-04-12 02:21    [W:0.114 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site