lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/4] Fix bugs in kona pwm driver and pwm core
Hi Jonathan,

Patcheset looks good.
Acked-by: Scott Branden <sbranden@broadcom.com>


On 15-04-10 11:58 AM, Jonathan Richardson wrote:
> This patchset fixes a number of bugs in the Broadcom Kona pwm driver. It also
> fixes a bug in the pwm core where the enabled state was incorrect on failed
> calls to enable. Also, a new function was added to the pwm core to add pwm chips
> with inversed polarity for chips that have a different default polarity than the
> core. The prevents incorrect polarity being reported.
>
> These changes are required for the Kona pwm driver to work on Cygnus and the
> same pwm IP is being used.
>
> Changes from v5:
> - Address Dmitry's comment on code cleanup of pwm_enable() in pwm core.
> - Including all patches from different contributors in this patchset. Some
> were left out in v4.
>
> Changes from v4:
> - Rebased to Tim Kryger's patch that adds support in pwm core to add driver
> with inversed polarity.
> - Removed patch 2 that resolved difference between hardware default polarity
> and pwm framework default polarity. The default polarity is set properly now
> when the pwm driver is registered with the pwm framework.
>
> Arun Ramamurthy (1):
> drivers: pwm: bcm-kona: Dont set polarity in probe
>
> Jonathan Richardson (2):
> pwm: kona: Fix incorrect config, disable, and polarity procedures
> pwm: core: Set enable state properly on failed call to enable
>
> Tim Kryger (1):
> drivers: pwm: core: Add pwmchip_add_inversed
>
> drivers/pwm/core.c | 52 +++++++++++++++++++++------
> drivers/pwm/pwm-bcm-kona.c | 84 +++++++++++++++++++++++++++++++++-----------
> include/linux/pwm.h | 6 ++++
> 3 files changed, 110 insertions(+), 32 deletions(-)
>



\
 
 \ /
  Last update: 2015-04-10 23:21    [W:1.184 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site