lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 10/11] ARM: dts: apq8064: Move i2c1 pinctrl to apq8064.dtsi
Date
I2C1 pinctrl is not really specific to a board, moving to SOC dtsi would
avoid redefining this in every board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 7 -------
arch/arm/boot/dts/qcom-apq8064.dtsi | 7 +++++++
2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 528cb31..f97339a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -11,13 +11,6 @@

soc {
pinctrl@800000 {
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
- };
- };
-
card_detect: card_detect {
mux {
pins = "gpio26";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 93de48a..345ea08 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -113,6 +113,13 @@
function = "ps_hold";
};
};
+
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
};

intc: interrupt-controller@2000000 {
--
1.9.1


\
 
 \ /
  Last update: 2015-04-10 23:21    [W:0.161 / U:7.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site