lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 07/11] ARM: dts: apq8064: Add usb host support to CM QS-600
Date
From: Nicolas Dechesne <nicolas.dechesne@linaro.org>

This patch adds device tree nodes to support two usb hosts on Compulab QS600 board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[Srinivas Kandagatla: fixed up regulators and status properties]
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 142885d..4eedfe4 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -101,6 +101,28 @@
};
};

+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
--
1.9.1


\
 
 \ /
  Last update: 2015-04-10 23:21    [W:0.801 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site