lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/3] Add ktd2692 Flash LED driver using LED Flash class
On 04/10/2015 12:15 PM, Ingi Kim wrote:

> This patch adds ktd2692 Flash LED driver with LED Flash class
>
> Change in v6:
> - Change goto label to if-else
> - Change DT binding style for LED device binding
>
> Change in v5:
> - Clean up the code
> - Fix help message of Kconfig
> - Fix issue related with regulator and mutex usage
> - Remove tab spaces in bindings
>
> Change in v4:
> - Clean up the code
> - Modify binding documentation of ktd2692
>
> Change in v3:
> - Clean up the code
> - Add aux gpio pin to control Flash LED
>
> Change in v2:
> - Introduction of LED Flash class as Jacek's comment
> - Supplement of binding documentation
> - Rename gpio control pin and remove unused pin
> - Add regulator for the Flash LED
>
> Ingi Kim (3):
> of: Add vendor prefix for Kinetic technologies
> leds: ktd2692: add device tree bindings for ktd2692
> leds: Add ktd2692 flash LED driver
>
> .../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/leds/Kconfig | 9 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++
> 5 files changed, 459 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> create mode 100644 drivers/leds/leds-ktd2692.c
>
Run checkpatch.pl with --strict option on this series..

./scripts/checkpatch.pl --strict 000*

Reported "CHECK: Alignment should match open parenthesis"..

--
Varka Bhadram



\
 
 \ /
  Last update: 2015-04-10 09:41    [W:0.063 / U:17.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site