lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 09/12] ARM: dts: apq8064: Add USB OTG support for CM QS-600


On 10/04/15 18:26, Stephen Boyd wrote:
> On 04/10/15 05:34, Srinivas Kandagatla wrote:
>> From: Nicolas Dechesne <nicolas.dechesne@linaro.org>
>>
>> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> [Srinivas Kandagatla: fixed up regulators and status properties]
>> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>> index fc69931..d353694 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>> @@ -101,6 +101,14 @@
>> };
>> };
>>
>> + /* OTG */
>> + usb1_phy:phy@12500000 {
>
> Space after that ':' please.
>
Yep, I will fix it in next version.
>> + status = "okay";
>> + vddcx-supply = <&pm8921_s3>;
>> + v3p3-supply = <&pm8921_l3>;
>> + v1p8-supply = <&pm8921_l4>;
>> + };
>> +
>> usb3_phy:phy@12520000 {
>> status = "okay";
>> vddcx-supply = <&pm8921_s3>;
>> @@ -115,6 +123,15 @@
>> v1p8-supply = <&pm8921_l23>;
>> };
>>
>> + gadget1:gadget@12500000 {
>> + status = "ok";
>> + };
>> +
>> + /* OTG */
>> + usb1: usb@12500000 {
>
> This one is good.
>
>> + status = "ok";
>> + };
>> +
>> usb3: usb@12520000 {
>> status = "okay";
>> };
>
>


\
 
 \ /
  Last update: 2015-04-10 21:01    [W:0.053 / U:4.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site