Messages in this thread | | | From | Ingi Kim <> | Subject | [PATCH v6 0/3] Add ktd2692 Flash LED driver using LED Flash class | Date | Fri, 10 Apr 2015 15:45:56 +0900 |
| |
This patch adds ktd2692 Flash LED driver with LED Flash class
Change in v6: - Change goto label to if-else - Change DT binding style for LED device binding
Change in v5: - Clean up the code - Fix help message of Kconfig - Fix issue related with regulator and mutex usage - Remove tab spaces in bindings
Change in v4: - Clean up the code - Modify binding documentation of ktd2692
Change in v3: - Clean up the code - Add aux gpio pin to control Flash LED
Change in v2: - Introduction of LED Flash class as Jacek's comment - Supplement of binding documentation - Rename gpio control pin and remove unused pin - Add regulator for the Flash LED
Ingi Kim (3): of: Add vendor prefix for Kinetic technologies leds: ktd2692: add device tree bindings for ktd2692 leds: Add ktd2692 flash LED driver
.../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++ 5 files changed, 459 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt create mode 100644 drivers/leds/leds-ktd2692.c
-- 2.0.5
| |