lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 06/12] ARM: dts: apq8064: Add MDP support
Date
From: Rob Clark <robdclark@gmail.com>

This patch adds MDP node to APQ8064 dt.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[Srinivas Kandagatla: Fixed the hdmi switch regulator name]
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 104 ++++++++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 56cc65e..c88470c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1,6 +1,7 @@
/dts-v1/;

#include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
@@ -107,6 +108,20 @@
};
};

+ hdmi_pinctrl: hdmi-pinctrl {
+ mux1 {
+ pins = "gpio69", "gpio70", "gpio71";
+ function = "hdmi";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ mux2 {
+ pins = "gpio72";
+ function = "hdmi";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
ps_hold: ps_hold {
mux {
pins = "gpio78";
@@ -250,6 +265,18 @@
};
};

+ ext_3p3v: regulator-fixed@1 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
@@ -522,5 +549,82 @@
compatible = "qcom,tcsr-apq8064", "syscon";
reg = <0x1a400000 0x100>;
};
+
+ hdmi: qcom,hdmi-tx@4a00000 {
+ compatible = "qcom,hdmi-tx-8960";
+ reg-names = "core_physical";
+ reg = <0x04a00000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_NONE>;
+ clock-names =
+ "core_clk",
+ "master_iface_clk",
+ "slave_iface_clk";
+ clocks =
+ <&mmcc HDMI_APP_CLK>,
+ <&mmcc HDMI_M_AHB_CLK>,
+ <&mmcc HDMI_S_AHB_CLK>;
+ qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70
+ GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71
+ GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-hpd = <&tlmm_pinmux 72
+ GPIO_ACTIVE_HIGH>;
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ hdmi-mux-supply = <&ext_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
+ };
+
+ gpu: qcom,adreno-3xx@4300000 {
+ compatible = "qcom,adreno-3xx";
+ reg = <0x04300000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 80 IRQ_TYPE_NONE>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "mem_clk",
+ "mem_iface_clk";
+ clocks =
+ <&mmcc GFX3D_CLK>,
+ <&mmcc GFX3D_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>,
+ <&mmcc MMSS_IMEM_AHB_CLK>;
+ qcom,chipid = <0x03020002>;
+ qcom,gpu-pwrlevels {
+ compatible = "qcom,gpu-pwrlevels";
+ qcom,gpu-pwrlevel@0 {
+ qcom,gpu-freq = <450000000>;
+ };
+ qcom,gpu-pwrlevel@1 {
+ qcom,gpu-freq = <27000000>;
+ };
+ };
+ };
+
+ mdp: qcom,mdp@5100000 {
+ compatible = "qcom,mdp";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_NONE>;
+ connectors = <&hdmi>;
+ gpus = <&gpu>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "lut_clk",
+ "src_clk",
+ "hdmi_clk",
+ "mdp_clk",
+ "mdp_axi_clk";
+ clocks =
+ <&mmcc MDP_CLK>,
+ <&mmcc MDP_AHB_CLK>,
+ <&mmcc MDP_LUT_CLK>,
+ <&mmcc TV_SRC>,
+ <&mmcc HDMI_TV_CLK>,
+ <&mmcc MDP_TV_CLK>,
+ <&mmcc MDP_AXI_CLK>;
+ };
};
};
--
1.9.1


\
 
 \ /
  Last update: 2015-04-10 15:01    [W:0.202 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site