[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 00/12] ARM: dts: apq8064 dt patches
Thanks all for reviewing v1 patches.

Hi Kumar,

Now that the rpm redesign dependency is resolved, If its not too late could you
queue these dt patches for v4.1-rc1 or v4.1-rc2.

I tested these patches on APQ8064 based IFC6410 and CMQS600 board with SATA/USB/HDMI.
I also rebased these patches on top of your qcom/dt branch.


Changes since v1
* Made regulators board specific, as suggested by Bjorn.
* Used correct IRQF flags for rpm, spotted by Bjorn.
* Fixed serial lable to be more appropriate, spotted by Bjorn.

Nicolas Dechesne (2):
ARM: dts: apq8064: Add usb host support to CM QS-600
ARM: dts: apq8064: Add USB OTG support for CM QS-600

Pramod Gurav (1):
ARM: dts: apq8064-ifc6410: Add DT alias for serial port

Rob Clark (1):
ARM: dts: apq8064: Add MDP support

Srinivas Kandagatla (8):
ARM: dts: apq8064: add RPM regulators support
ARM: dts: apq8064-ifc6410: Add basic regulators
ARM: dts: apq8064: Add usb host support.
ARM: dts: apq8064: Add USB OTG support
ARM: dts: apq8064: Add SATA controller support.
ARM: dts: apq8064-cm-qs600: Add basic regulators.
ARM: dts: apq8064: Move i2c1 pinctrl to apq8064.dtsi
ARM: dts: apq8064: add i2c3 node for panel.

arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 100 ++++++++++
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 136 +++++++++++++-
arch/arm/boot/dts/qcom-apq8064.dtsi | 280 +++++++++++++++++++++++++++-
3 files changed, 507 insertions(+), 9 deletions(-)


 \ /
  Last update: 2015-04-10 15:01    [W:0.144 / U:3.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site