lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 0/9] Add sd/emmc support for stih407 family silicon
From
On 10 April 2015 at 11:40, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi,
>
> This series adds sd/emmc support to the sdhci-st.c driver for stih407
> family silicon. The changes mainly involve configuring some extra glue
> registers in the flashSS which configure the Arasan controller.
>
> This series also adds support for UHS modes for eMMC. To allow
> UHS HS200/SD104 modes to function correctly, due to the
> tight timing constriants, support for delay management is also added.
> Two types of delay management are supported, static delay management and
> dynamic delay management, this delay management is only available
> on eMMC pads on stih410 and later silicon.
>
> This series has been tested with stih410-b2120 revd on eMMC and sd, at
> various clock speeds. As part of this testing a bug was also found in the
> upstream flexgen clock set_rate implementation (now fixed upstream).
>
> max-frequency = 200Mhz
> /dev/mmcblk0p1:
> Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec
>
> max-frequency = 100Mhz
> root@debian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
> Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec
>
> max-frequency = 50Mhz
> root@debian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
> Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec
>
> It has also been tested on stih416-b2020 to ensure we have caused no
> regressions. Finally the dt documentation has been updated to reflect
> the changes in the driver code. Intrestingly it seems we are the first
> upstream platform to be using some of the uhs bindings such as
> sd-uhs-sdr104.
>
> Changes since v4:
> - Fixup typo (Pete)
>
> Changes since v3:
> - Rebased on Ulf's mmc next branch (rc5 based) (Ulf)
>
> Changes since v2:
> - Some whitespace fixups (Max)
> - if (!ioaddr) suggestion (Max)
> - Add stih418-b2199 suport (Max)
> - Stih410 to STiH410 fixes (Max)
> - rebased on v4.0-rc6 (Pete)
>
> Changes since v1:
> - Partition the changes into smaller patches to aid review process (Ulf)
>
> Peter Griffin (9):
> mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss
> glue regs
> mmc: sdhci-st: Add support for de-asserting reset signal and top regs
> resource
> mmc: sdhci-st: Add delay management functions for top registers
> (eMMC).
> mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue
> registers.
> mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.
> mmc: sdhci-st: Update the quirks for this controller.
> mmc: sdhci-st: Update ST SDHCI binding documentation.
> ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc.
> ARM: STi: DT: STiH418: Add dt nodes for sdhci and emmc.
>
> Documentation/devicetree/bindings/mmc/sdhci-st.txt | 100 +++++-
> arch/arm/boot/dts/stih407-family.dtsi | 30 ++
> arch/arm/boot/dts/stih410-b2120.dts | 10 +
> arch/arm/boot/dts/stih418-b2199.dts | 12 +
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 +
> drivers/mmc/host/sdhci-st.c | 354 ++++++++++++++++++++-
> 6 files changed, 500 insertions(+), 14 deletions(-)
>
> --
> 1.9.1
>

Thanks! Applied.

Kind regards
Uffe


\
 
 \ /
  Last update: 2015-04-10 13:41    [W:0.086 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site